IRJET- A Survey on Cardless Automated Teller Machine(ATM)

International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 06 Issue: 04 | Apr 2019 www.irjet.net p-ISSN: 2395-0072
© 2019, IRJET | Impact Factor value: 7.211 | ISO 9001:2008 Certified Journal | Page 3946
A SURVEY ON CARDLESS AUTOMATED TELLER MACHINE (ATM)
Dept. Electronics and Telecommunication Engineering, Keystone School of Engineering, Maharashtra, India
-----------------------------------------------------------------------------------------------------
Abstract: Automated Teller Machine (ATM) transactions are found safe, reliable and these days for fulfilling our financial
commitments. Typical approach for using ATM mandates involvement of Debit card. But still, people do experience times
when their account lacks balance amount or they forget to carry card and struggle to complete transaction. We know that,
parallel to ATM usage, mobile phones’ usage has also been an inevitable trend. Establishing a connection between these e-
gadgets has ignited a simple and effective approach to withdraw cash without the involvement of debit card which can be
referred to as card less cash withdrawal. Fingerprint module is used for authentication of user. An OTP is send to user, which
along with fingerprint provide two levels of security. When fingerprint and OTP are matched then customer’s account will
open in ATM machine. LCD display will display user name, debited money, authentication status etc.
Keywords: Fingerprint Module, OTP, Global System of Mobile Communication (GSM), PIC Microcontroller.
I. INTRODUCTION
The Automated Teller Machine (ATM) is a self-service machine that performs some human teller functions like balance
enquiry, bills payments, mini statements, Fund Transfer, Cash Deposit and so on. ATM
mechanism are carried out through the use of a debit/credit card which enables the card
holder(s) to access and carry out banking transactions without a teller. Many studies have focused on using biometric
techniques in enhancing the security of the ATM. However, a few studies have also use of GSM Technology, while some have
use a combination of both techniques.
The present-day ATMs are using pin based security. The pin number is fed as the input which is encrypted at the client side
and the data is decrypted at the server side. As the technology is getting improved, the crackers are easily retrieving the data
and hence the frauds are going on increasing. Hence the only way to secure the transaction is to replace the computer-
generated numbers with the biometric security.In traditional ATM system authenticate by using credit card and the password,
method has some defect. Using credit card and password cannot verify the client identify exactly in recently year, the
algorithm that the finger print recognized continually update and sending the four digit code by controller which has gives
new verification ideas for us, the typical password authentication method combine with biometric identification technology
verify the clients identity better and achieve the purpose that use of ATM machines improve the safety effectively. To
implement a Card less ATM using finger print in such way that all the parameter inside it is controller and send OTP. Biometric
is the physical characteristics of the human body. Some of these characteristics are used for authentication hence known as
Biometric authentication.
II. LITERATURE SURVEY
Wei Wang, Jianwei Li, Feiffer Huang, Hailing Fang. Design and implementation of Log-Gabor filter in fingerprint image
enhancement. Pattern Recognition Letters 29 (2008)301-308. Which results in the proposed Log-Gabor filtering method that
can effectively improve the fingerprint image quality and promote the reliability of fingerprint identification.
Ahmed Bait Garko (2011) Enhancing the Current Automated Teller Machine (ATM) In Nigerian Banking Sector
JORIND 9(2) December, 2011. ISSN 1596–8308.www. Tran’s campus. org. In this paper, a new framework is designed to
enhance the current ATM operations in Nigerian banking sector to allow customers deposit money and transfer it to another
customer in either the same bank or different bank over the network instantly using an ATM.
Oko .S and Oruh.J (2012), Fingerprint biometric token. Developed an ATM based finger print verification and
simulated it for ATM operations by incorporating the fingerprint users into the bank database.The system developed was
Prof. Mayuri Bhosle. Miss. Archana Takawale, Miss. Ankita Kalyani. Miss. Anjali Mane

inefficient because there was no finger print matching alogrithm.The system develop was not built as an enhancement of the
exisiting system.
Ravi Kumar (2014) Fingerprint recognition in digital image processing using both primary and referance finger to
authenticate users instedof the traditional pin number.A new business model which would enhance ATM security was
developed.Another refereance fingerprint belonging to anominee or a close family member was adopated which also lead to a
security could breech, thus compromissing the security of account owner.The proposed system was not built the exisiting
system. Jimoh R.G . 2(2016) short message service(SMS) verification. Developed an alogrithm For enhancing ATM
authentication system using short message service verification. Conducted a usability testing of the proposed system. The
developed algorithm only considered a minimum withdrawal amount
III. BLOCK DIAGRAM
Fig.1 block diagram of proposed system
a) Pic microcontroller-
This is the CPU of our project. We are going to use a microcontroller of Pic 18f4520 family. Pic microcontroller chip are
design with Harvard architecture, and are offered in various device 8families. It can be used to program microcontroller
circuits. It permits the programmer to simulate the program, before downloading it to a PIC microcontroller IC (Integrated
Circuit). They are reliable and malfunctioning of PIC
percentage is very less and response time of PIC increases by using RISC architecture. Power consumption is also very less as
compared to other micro controllers.PIC microcontrollers are electronic circuits that
can be programmed to carry out a vast range of tasks. They can be programmed as timers or to control a production line and
much more. In this microcontroller more memory as compare to ardino so in our project we mostly preferred pic
microcontroller.PIC microcontroller is the main part in our project. It plays the main role in this project.
PIC-
MICROCON
TROLLER
Power Supply
Fingerprint
Module
GSM
LCD
Keypad

b)GSM Device:
Stands for global system for mobile communication (GSM) The idea of GSM was developed at Bell Laboratories in 1970.It
is widely used mobile communication System in the world.GSM system was developed as a digital system using time division
multiple access (TDMA) technique for communication purpose.GSM is used for creating password and send to mobile through
wirelessly. Various type of GSM are available in market but in our project we used SIM900A GSM.GSM is used to identify the
subscriber to the system. A secret key for authentication and other information
GSM is a digital mobile network that is used by mobile phone users in Europe and other part of the world. GSM is an open
and
c) OTP
One-time password (OTP), also known as one-time pin, is a password that is valid for only on log in session or transaction,
on a computer system or other digital device.OTP provides more security in ATM transaction. There is limit of wrong OTP
attempts as well. If wrong attempts exceed the limit, ATM If any misbehavior take place it will block the enter transaction.
d) LCD
A 16x2 LCD display is very basic module and is very commonly used in various devices and circuits. These preferred
over seven Segments and other multi segment LEDs. A 16x2 LCD means it can display 16 characters per line and there
are 2 such lines. LCD modules are very commonly used in most embedded projects, the reason being its cheap price,
availability and programmer friendly. Most of us would have come across these displays in our day to day life, either at PCO’s
or calculators. 16×2 LCD is named so because; it has 16 Columns and 2 Rows. There are a lot of combinations available like,
8×1, 8×2, 10×2, 16×1, etc. but the most used one is the 16×2 LCD. So, it will have (16×2=32) 32 characters in total and each
character will be made of 5×8 Pixel Dot
GSM system was developed as a digital system using time division multiple access (TDMA) technique for communication
purpose. GSM was developed using digital technology. The GSM is that multiple users share the same bandwidth. With enough
users, the transmission can encounter interference. Therefore, faster technologies, such as 3G, have been developed on
different types of networks than in order to avoid such bandwidth limitations.
e) Keypad
Keypad is use to enter the OTP number. Keypad is used as a input. Most of the applications of require keypads to take the
user inputs, especially in case where an application requires more number of keys. With simple architecture and easy
interfacing procedure, matrix keypads are replacing normal keypads and these are available in configurations like 3×4 and
4×4 based on the application these are selected. The push button or switches which are arranged in a matrix format of rows
and columns. A matrix keypad consists of a set Push-buttons by offering more inputs to the user with less I/O pins. As a
Human Machine Interface (HMI) keypad plays an important role in virtual microprocessor. This matrix keypad is the most
commonly used as input device in many of the application such as digital circuits, telephone communications, calculators,
ATMs, and so on.
f) Fingerprint module
A finger print is feature pattern of finger. it is a believe with a strong evidence that each finger print is unique. Each
person has his own finger print with the permanent uniqueness .so finger print has been used for identification and forensic
investigation for long time. A fingerprint scanner is a type of electronic security system that uses finger prints
for biometric authentication to grant a user access to information or to approve transactions. Push-buttons by offering more
inputs to the user with the lesser I/O pins. As a Human Machine Interface (HMI) keypad plays a major role in vital
microprocessor.
The biometric section of the new proposed system is as described below, the banks already have the biometric finger print of
all their customer, this biometric will be enroll in the ATM.In this project finger print module is connected to the ardino
controller. In ardino controller all finger print library are available which used for finger print enrol.

IV.FLOWCHART
Fig.2 Flowchart of proposed system

V. COMPARISION WITH EXISTING TECHINIQUES
Sr
no
Authors Paper Advantages Disadvantage
1. Oko S.
and
Oruh,
J. (2012)
Finger print biometric
token.
Developed ATM based
fingerprint verification and
simulated it for ATM
operations by incorporating
the fingerprints of users into
the bank’s database.
The system developed was
inefficient because there was no
finger print matching algorithm.
2.
Ravikumar et
al. (2013)
Finger print recognition in
digital image processing
using both primary and
reference fingerprint to
authenticate users instead
of the traditional pin
number.
Finger print algorithm are
developed which improves
the existing system.
Lack of security.
3 Padmapriya V.
and Prakasam S.
(2013) [
A combination of
fingerprint biometric
token and GSM
technology.
Proposed a system
architecture that incorporates
both the finger print and GSM
technology into the existing
PIN-based authentication
process. Activates send a pre-
stored SMS to a predefined
phone number.
Another reference fingerprint
belon0ging to a nominee or a
close family member was adopted
which also lead to a security could
breech, thus compromising the
security of the account owner. 2.
The proposed system was not
built on the existing system
4. Jimoh R.G. and
Babatunde A. N.
(2014).
Short Message Service
(SMS) verification.
Designed algorithm for
enhancing ATM
authentication system using
Short Message Service (SMS)
verification.
It considered a minimum
withdrawal amount.
VI .CONCLUSION
In this way, the implementation of ATM security by using fingerprint recognition and GSM model took advantage of the
stability and reliability of finger print characteristics. Additional, the system also contains the original verifying method which
was inputting owner’s password which is send by the controller. The security features enhanced largely for the stability and
reliability of owner recognition. the whole system was built on the finger print technology which make the system more safe,
reliable and easy to use.
VII.REFERENCES
[1] Aggarwal, C. C., Wolf, J. L., and Yu, P. S., “Caching on the World Wide Web”, IEEE Transactions on Knowledge and Data
Engineering, Vol.11, pp.94-107, 2009.
[2] Amurthy,and M.S. Reddy, “Implementation of ATM Security by Using Fingerprint recognition and GSM.” International
Journal of Electronics Communication and Computer Engineering, Volume 20, Issues 4, April 2012, pp. 83-86.
[3] N.K. Rather, J.H. Connell, and R.M. Bolle, “Generating Cancellable Fingerprint Templates.” IEEE Transaction on Pattern
Analysis and Machine Intelligence, Volume 31, Issue 2, February 2007. pp.4.

[4] S.T.Bhosale, Dr.B.S.Sawant, “Security in E-Banking via Card Less Biometric ATMs”, International Journal of Advanced
Technology & Engineering Research, Vol.2, pp.9-12,2012.
[5] Hussmann, H, “Using Fake Cursors to Secure on-screen Password Entry,” in Proceedings of CHI, June 2013, pp. 2399–
2402.
[6] G. Hong, and J. Bo, “Forensic Analysis of Skimming Devices for Credit Fraud Detection,” 2nd IEEE International Conference
on Information and Financial Engineering (ICIFE), September 2010, pp. 542 –546.
[7] B. Sujith, “Crime Detection and Avoidance in ATM: A New Framework,” International Journal of Computer Science and
Information Technologies, Volume 24, Issue 5, May 2014, pp. 210-222.
[8] S. Kumaresan, G.D. Kumar, S. Radhika, “Design of Secured ATM by Wireless Password Transfer and Shuffling Keypad,” In
IEEE Sponsored 2nd International Conference on Innovations in Information Embedded and Communication Systems, July
2015 pp. 325-329.
[9] Abdurrahman, A. Arwa, C. Xiuzhen, and B. Ron fang, A novel verification method for payment card systems, In Springer-
Verlag London, May 2015, pp. 1145-1156.
[10] L. Mun-Kyu, “Security Notions and Advanced Method for Human Shoulder-Surfing Resistant PIN Entry”, In IEEE
Transactions on Information Forensics and Security, August 2014,pp. 1556-6013.
[11] Z.Li, Q.Sun, Y. Lian and D.Giusto, “association based graphical password desire resistant to shoulder surfing attack”,
international conference on multimedia a expo, china, pp. 245-248,2005.
[12] Kumar, K.Shailaja, G.Shailaja, A.Kavitha, A.Saxena ,“mutual authentication and agreement for GSM”, international
conference mobile business (icmb’06), pp. 25-26, 2006.
[13] C.H. Ugwuishiwu, M.E. Eczema and N.G. Ugwuegbu (2013). “Design and Implementation of ATM Emulator. Afr J. of Comp
& ICTs”. Vol 6, No. 4. Pp 165-172.
[14] M.Ajaykumar, N.BharathKumar, “Anti-Theft ATM Machine Using Vibration Detection Sensor”, 9International Journal of
Advanced Research in Computer Science and Software Engineering, vol.3, pp.416-418,2013.
[15] Odusina, Ayokunle Olumide (2014) “Automated Teller Machine Usage And Customers’ Satisfaction In Nigeria Elite
Research Journal of Accounting and Business Management” Vol. 2(3) pp. 43 - 47, July, 2014.
[16] Navneet Sharma, Vijay Singh Rathore, “Role of Biometric Technology over Advanced Security and Protection in Auto
Teller Machine Transaction”,
[17] M. R. Dineshkumar, M. S. Geethanjali, R. Karthika, M. Nagaraj, N. Vijayanandam, “Protected Cash Withdrawal in ATM Using
Mobile Phone”, International Journal Of Engineering And Computer Science,Vol.2,pp.1346-1350,2013.

[18] Oko, S. and Oruh, J. (2012): Enhanced ATM security system using biometrics. IJCSI International Journal of Computer
Science Issues, September 2012. Vol. 9, Issue 5, No 3, pp. 352-357.
[19] Navneet Sharma, Vijay Singh Rathore, “Role of Biometric Technology over Advanced Security and Protection in Auto
Teller Machine Transaction”, International Journal of Engineering and Advanced Technology, Vol.1,pp.249-251,2012.
[20] Madhuri More 1 , Sudarshan Kankal2 , Akshaykumar Kharat3 , Rupali Adhau, “CARDLESS AUTOMATIC TELLER MACHINE
(ATM) BIOMETRIC SECURITY SYSTEM DESIGN USING HUMAN FINGERPRINTS”, International Journal of Advance Engineering
and Research Development Volume 5, Issue 05, May -2018, 2348-6406.

IRJET- A Survey on Cardless Automated Teller Machine(ATM)

More Related Content

What's hot (20)

Similar to IRJET- A Survey on Cardless Automated Teller Machine(ATM) (20)

More from IRJET Journal (20)

Recently uploaded (20)

IRJET- A Survey on Cardless Automated Teller Machine(ATM)