IRJET- Smart Car Anti-Thieft System
0 likes•21 views
This document describes a smart car anti-theft system that uses IoT technology. The system uses a vibration sensor to detect if someone is trying to break into the car. It then sends SMS, email, and push notifications to the owner's phone using an ESP8266 WiFi module. It also triggers an alarm in the car. If the car is stolen, the in-built GPS system can track its location. The system is compact and affordable. It aims to provide higher security and response times than traditional car alarm systems through multi-layered alerts and GPS tracking without extra hardware.
![International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056
Volume: 06 Issue: 07 | July 2019 www.irjet.net p-ISSN: 2395-0072
© 2019, IRJET | Impact Factor value: 7.211 | ISO 9001:2008 Certified Journal | Page 1535
3. APPLICATIONS
• VIP vehicle tracking.
• Vehicle Security Applications.
• Ambulance tracking.
• Navigation systems
4. CONLUSION
Advanced Car Security System is very commonly used in homes, offices, vehicles, bank and so on. These system are becoming
increasingly important in large cities and it is more secured than other systems. The main motive is to create an seamless anti
thief security with 4 layers of alert system i.e. alarm SMS Gmail and push up notification, the system has a higher response
time and also GPS tracking inbuilt in the system without any additional GPS module of coordinate tracking.
5. REFERENCE
[1] Cui Gengshen, and Huang Tinghui. A study on the auto guard against theft sestem of network based on S3C44B0X[J].
Microcomputer Information, Guang Xi, 2006，22(11-2): 146-148．
[2] Wei Zhenlin, and Wang Xifu. Design of time period Monitor System for electrical Vehicles supported GPS[J]. Journal of
China Safety Science, Bei Jing, 2006, 16(4): 136-140.
[3] Zhai Guorui, and Dai Shenghua. Design of auto guard against theft system based on GPRS and GPS[J]. Microcontrollers and
Embedded Systems, Bei Jing, 2007, 8: 39-41.
[4] Fan Zhenfang, Peng Aihua, and Zhou Jian, etc. Design of automotive vehicle guard against larceny and alarm supported GSM
network[J]. Application of Electronic Technique, Chang Sha, 2006, 3: 14-16.
[5] Song Fuchang. Identification and detection diagram of automobile sensor[M]. Beijing: Electronic Industry Press. 2003.
[6] ZHENG Youzheng. Single chip principle and application[M]. Sichuan: Sichuan University Press, 2003.
BIOGRAPHY
Bhavna A. Ambhore is a student of National Institute of Electronics & Information Technology Aurangabad and securing
MTECH DEGREE in electronics and her area of interest is security and cyber system.
Kumar Gera is a professor f National Institute of Electronics & Information Technology Aurangabad and has an affiliataion of
scientist E .](https://image.slidesharecdn.com/irjet-v6i7202-191106052406/85/IRJET-Smart-Car-Anti-Thieft-System-3-320.jpg)
IRJET- Smart Car Anti-Thieft System
- 1. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 06 Issue: 07 | July 2019 www.irjet.net p-ISSN: 2395-0072 © 2019, IRJET | Impact Factor value: 7.211 | ISO 9001:2008 Certified Journal | Page 1533 SMART CAR ANTI-THIEFT SYSTEM Bhavna Arun Ambhore, Kumar Gera Student, MTECH, NIELIT, Aurangabad, Maharashtra, India Professor Scientist E, NIELIT, Aurangabad, Maharashtra, India ---------------------------------------------------------------------------***--------------------------------------------------------------------------- Abstract:- An automobile remote alarm system based on IOT communication network is introduced. The IOT module and Microcontroller is combined with the system, vibration used to achieve short centralized message service (SMS), Gmail notification and pop up notification and alarm and theft-proof of automobile. The shortcoming of traditional systems including less security and lower alarming range is overcome, and the cost of this system is cut down, so it should ha ve good application prospects. 1. INTRODUCTION Automobile industry is in a high speed development state for several years. Automobile's appearance impacts and becoming the progressive symbol of modern society. However, because the rise of the car trade, vehicle thief case is increasing.. At present, in the top market of the automobile anti-theft production is CMOS chip production, However, chip anti-theft production is with a coffee security and little alarm scope, that cannot be found once lost however. The car anti –theft system that we have implemented will able send SMS , Gmail and push notification on the owner’s phone, through a Wifi module ESP8266 this module will hit the trigger alarm in the car and also send emergency signal to the owner’s phone. This system in possible since we have used and vibrating sensor. Even after the theft manage to brut open the car and steal the car he can be tracked down by the GPS system that we have built in this Node MCU. BLOCK DIAGRAM AND CIRCUIT DIAGRAM BLOCK DIAGRAM ESP 8266 Power Supply Unit Vibration Sensor 1 OSCILLATOR UNIT Display RESET CIRCUIT Voltage Regulator
- 2. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 06 Issue: 07 | July 2019 www.irjet.net p-ISSN: 2395-0072 © 2019, IRJET | Impact Factor value: 7.211 | ISO 9001:2008 Certified Journal | Page 1534 2. METHODOLOGY Module image This system in smaller in size and can be easily adjusted to the car’s door. This seamless technology is achieved through Node MCU ESP8266 and vibrating sensor and IOT. The power provide is meant by victimization The LM78XX/LM78XXA series of three-terminal positive regulators area unit offered within the TO-220/D-PAK package and with many mounted output voltages, creating them helpful in a Wide range of applications. Each kind employs internal current limiting, thermal shutdown and safe operational house protection, creating it primarily indestructible. Although designed primarily as mounted voltage regulators, these devices is employed with external elements to get adjustable voltages and currents. After the system is active. The First phase of this system is vibrating sensor, this sensor works in piezo-electric sensor when the thief tries to open door of the car vibration generated at the sensor end it passes high signal to the MPU, this data is interpreted by the MPU and alarm triggers the alarm used in here is a buzzer it is drive by an oscillating unit which generates oscillating voltage Oscillating voltage alternately squeezes and releases the piezo element. Must apply changing voltage, a steady HIGH or LOW won’t work. The buzzer case supports the piezo element and has resonant cavity for sound transfer. Then data is transmitted to the server through the Wi-Fi module, Which is then received by the Server, Currently we have used Blink site’s server for the data transfer between our system to owner’s phone. The blink server then passes forward the data to Android blink platform APK, which can be customized and instructed to generate SMS , push notification , Gmail when a particular command from the server is received .
- 3. International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 06 Issue: 07 | July 2019 www.irjet.net p-ISSN: 2395-0072 © 2019, IRJET | Impact Factor value: 7.211 | ISO 9001:2008 Certified Journal | Page 1535 3. APPLICATIONS • VIP vehicle tracking. • Vehicle Security Applications. • Ambulance tracking. • Navigation systems 4. CONLUSION Advanced Car Security System is very commonly used in homes, offices, vehicles, bank and so on. These system are becoming increasingly important in large cities and it is more secured than other systems. The main motive is to create an seamless anti thief security with 4 layers of alert system i.e. alarm SMS Gmail and push up notification, the system has a higher response time and also GPS tracking inbuilt in the system without any additional GPS module of coordinate tracking. 5. REFERENCE [1] Cui Gengshen, and Huang Tinghui. A study on the auto guard against theft sestem of network based on S3C44B0X[J]. Microcomputer Information, Guang Xi, 2006，22(11-2): 146-148． [2] Wei Zhenlin, and Wang Xifu. Design of time period Monitor System for electrical Vehicles supported GPS[J]. Journal of China Safety Science, Bei Jing, 2006, 16(4): 136-140. [3] Zhai Guorui, and Dai Shenghua. Design of auto guard against theft system based on GPRS and GPS[J]. Microcontrollers and Embedded Systems, Bei Jing, 2007, 8: 39-41. [4] Fan Zhenfang, Peng Aihua, and Zhou Jian, etc. Design of automotive vehicle guard against larceny and alarm supported GSM network[J]. Application of Electronic Technique, Chang Sha, 2006, 3: 14-16. [5] Song Fuchang. Identification and detection diagram of automobile sensor[M]. Beijing: Electronic Industry Press. 2003. [6] ZHENG Youzheng. Single chip principle and application[M]. Sichuan: Sichuan University Press, 2003. BIOGRAPHY Bhavna A. Ambhore is a student of National Institute of Electronics & Information Technology Aurangabad and securing MTECH DEGREE in electronics and her area of interest is security and cyber system. Kumar Gera is a professor f National Institute of Electronics & Information Technology Aurangabad and has an affiliataion of scientist E .