Launchtech India

Model ：X-431 PRO V3.0/ X-431
PRO3 V3.0

New Version Optimization
The new version is optimized for the
usage scenario, greatly improving the
following 4 indexes.
Data
Stream
APP
fluency
APP
storage
size
APP
loading
speed

Optimization of APP fluency
APP
fluency
Promote
by 15%

Optimization of APP loading speed
APP loading
speed
Promote
by 20%
After About 2.6S
Before About 3.0S

Optimization of Data Stream
Pre
optimization
refresh rate
The refresh
rate has
increased
more than
≥60%
BMW have
been
refreshed
by ≥200%
Most brands, the refresh rate has
increased by more than 60%.
But some brands, such as BMW, have
been refreshed by 200%.

In one minute, the pre and Post version data
refresh contrast is optimized.
Left is before, right is now, measured BMW X6.
Only for the Pro3 V3.0.
Before Now

Optimization of APK storage size.
Reduced
by 25%
After 52.0MB
Before 71.3MB

Performance upgrading:
• App boot load time improved 30%
• The interval from start-up to entering app
boosts 50%
• The overall smooth performance of App
optimized at 10%
• The App size reduced at a rate of 18%
APP startup
loading speed
lifting30%
Opening
speed50%
APP fluency
Promote10%
APP
slimming18%

APP boot loading speed
increased by about 30%
APP Boot
3.6 seconds
5.2 seconds
PADIII V2.0
PADIII V1.0

Boot Shutdown
25 seconds 20 seconds
38 seconds 35 seconds
PADIII V2.0
PADIII V1.0
* These are actually measured data, non-laboratory official data.
The interval from start-up
to entering app boosts 50%

Greatly improved system response speed
One-click close all app
Prohibit installation of non-certified software
OS

• The volume of APP decreases by 18% (from 78.8MB to 64.6MB, and decreases by 14.2MB).

In one minute, the pre and Post version
data refresh contrast is optimized.
Left for optimization, right for
optimization, measured BMW X6.
Before Now

X-431 PAD V
X-431 PAD V is a high-end comprehensive diagnostic
tool with charging base newly developed on the basis of
Android 7.1. It supports dual 5GHz Wi-Fi
communication, with features such as wide vehicle
model coverage, powerful diagnostic functions, and
accurate test data. Its protection level is IP65.

Product Features and Functions
• Android 7.1 customized system, Qualcomm 8-core processor, 10.1 inch capacitive touch screen, support
QC3.0 fast charging
• Camera: front, 8 Megapixels, rear, 13 Megapixels
• Support dual 5GHz Wi-Fi communication. The fifth-generation Wi-Fi technology, theoretically, the
transmission rate is 4 times faster than the previous generation
• Wide vehicle model coverage, powerful diagnostic functions (intelligent diagnosis, remote diagnosis, read
DTC, clear DTC, read data stream, actuation test), accurate diagnostic data, and abundant special functions
• Brand new industrial design, with soft rubber sheath on the four corners of the product, to effectively
prevent collision; IP65 protection level; damping shaft, free adjustment of nearly 180 degrees; support
three modes of hanging, support and normal
• Display I/M Readiness Status

Appearance Design Sketch(2)Appearance Design Sketch (1)
Product Design Sketch

No. Item X-431 PAD V X-431 PAD III
1 Picture
2 System Android 7.1 Android5.1.1
3 Screen
10.1 inch full-fitting, sunlight
readable screen (Gorilla Glass)
10.1 inch screen
4 Resolution 1920*1200 1920*1200
5 Processor 2.0 GHz 8-core 2.0 GHz 8-core
6 Cache 4GB 2GB
7 Hard Disk 64GB, 128G extended 64GB, 128G extended
8 Battery 9360mAh 15000mAh
9
Communicatio
n
Wi-Fi (Support 2.4GHz&5GHz) Wi-Fi
No. Item X-431 PAD V X-431 PAD III
Picture
10
Diagnostic
Mode
Bluetooth (Support BLE 4.2+EDR)
+ Wired diagnosis
Bluetooth + Wired diagnosis
11 Upgrade Online one-click upgrade Online one-click upgrade
12 Camera
Rear13 Megapixels,
front 8 Megapixels
Rear 8 Megapixels,
Front 2 Megapixels
13 Screen Shot Screen shot by software Screen shot by software
14 Voice Support Support
15 I/M(CC) Support Support
16
Dimension
(L*W*Hmm)
320×211×46mm 323×189×34mm
Product Parameters

SMARTBOX3.0
Smartbox3.0 is a new generation intelligent
diagnostic box with Linux system independently
developed by Launch, which supports multiple
communication modes (USB, BT, WIFI) and
multiple diagnostic protocols.
More powerful functions by combining
Smartbox3.0 with X 431 PADV integrated
diagnostic device.

Product Function
SMARTBOX3.0 supports the following: (hardware)
• Support 4-direction CAN, can be used as 4-direction CAN listening data, 1-direction CAN communication
pin can be arbitrarily programmed
• Support CANFD
• Support DOIP (ISO 13400)
• Support J1708
• Support J1850 PWM/VPW
• Support CCD
• Support SCI
• Support K wire/L wire
• Support 5~20V programmable voltage of pin 6, 9, 11, 12, 13 or 14
• Support voltage detection for pins 1,2,3,6,7,8,9,10,11,12,13,14,15
• Support battery voltage detection

• Support programmable control access and disconnection of CAN terminal resistance
• Support WIFI communication in different channels such as 2.4g and 5G~ 5.8g
• Support random switching between WIFI hotspot mode and network card mode
• Support Bluetooth 4.0
• Support USB three communication modes: USB BULK, USB to serial port, USB to Ethernet
• Support 12V and 24V system voltage
• Support SAE J2534-1 and SAE J2534-2
• Support RP1210/C
• Support online upgrade
Product Function
SMARTBOX3.0 supports the following: (hardware)

Product Parameters
SmartBox3.0 Parameters
Main parameters
Main structure Dual processor: Cortex – A7 + Cortex – M7
System Linux
Memory 256M
Storage 8GB
Power supply DC 9～36V
External interface
USB Type B USB 2.0
Bluetooth BLE 4.0 + EDR
WIFI Support 2.4G/5GHZ dual-band
Indicator lamp 5 multifunction indicator lamps
Vehicle connection J1962 16PIN

J2534 Supported Models:
The use of J2534 functions requires users to download the corresponding tool installation package
on Launch’s official website. Users can purchase the diagnostic software of the original factory and
use them together.
No. J2534 Original Software
1 Toyota/Lexus original software Techstream test
2 GM original software General Motors GDS2 test
3 HondaAcura original software HDS (Honda Diagnostic System) test
4 VolkswagenAudi original software ODIS test Offboard Diagnostic Interface Configuration
5 Land rover/Jaguar RandLoverJLR original software SDD test
6 VOLVO original software VIDA test Vehicle Information & Diagnostics For Aftersales
7 Subaru original software SSM4 test

Model：Pilot Scan
• Intelligent Professional Diagnostic Tool

Features：
• Customized system: Forever quick response
and smooth operation
• AutoVIN detection: automatically match
Make-Model-Year and instant diagnose after
connection

Features：
• Voltmeter: vehicle voltage real-time
display
• Diagnostic report automatically
generation and automatically sharing via
email

Features：
• Support one-click software upgrade
• Support diagnostic feedback
• Sun readable touch screen
• Support shortcut keys, e.g. screenshot

Features：
• Read DTC, clear DTC and read data
streams of the full systems for overseas
mainstream vehicles
• Support 6 common service and reset
functions
ABS bleeding Organic oil reset
Brake pad reset
Battery matching DPF regeneration
Steering angle reset

Pilot Scan Technical Parameters
CPU MT8167A, 1.5 GHz, Quad-core
Operation System Customized system
Battery 4000mAh
Display 5 Inches, 1280*720, Sun readable screen
RAM 1GB
ROM 8GB
Product Size 248.7*93.5*36 (mm)

Model：X-431 PT TPMS Diagnostic Tool
• A professional TPMS tool
• Basic diagnostic functions, common special
functions and TPMS sensor activation,
programming and learning

Items Others
LCD 5”720P IPS Touch Screen
OBDII Port Input Voltage 9—18V
DC Input Voltage 5V
Battery 4000mAh
Storage Temperature -20℃~70℃
Working Temperature -10 ℃~ 50℃
Dimension L237.5XW93.5XD32 mm
Net Weight 550g
Product Parameters

Features：
• Readable screen in the sun
• Closed system
• Support touch screen and keyboard
• Support automatic vehicles'’ full system basic diagnose
• Support OBD full function
• TPMS function
• Common special functions
• Online upgrade and One-click upgrade
• Can share diagnostic reports via scanning QR code

TPMS Function
1、 Activate all 315MHz/433MHz sensors and do the matching
2 、 Read and graphically display tire pressure data, including pressure,
tire temperature, battery state
3 、 Tire ID matching via OBDII port
4 、Tire pressure fault diagnosis, including read DTC, clear DTC
5 、Wireless programming, unlimited programming

ABS bleeding Organic oil reset Brake pad reset
Battery matching DPF regeneration Steering angle reset
Special Function

Model： BLUETOOTH TPMS SENSORInternal External
Features：
• Bluetooth 4.0 Smart & Smart Ready
• Strong Wireless Signal Up to 100
Meters
• 3 Years+ Long Battery Life
• Ultra-Light Weight < 25g for Internal
Voice Warning System
• iOS and Android APPs Ready

Model：Replacement TPMS Sensor
Features：
1、Universal OE Replacement (> 95% OE Coverage)
2、 Multi-Band Protocols (433MHz, 315MHz)
3、Over-the-Air Programming
4、5+ Years Battery Life
5、Aluminum & Rubber Stems

Item BLE-SENSOR RF-SENSOR
Working pressure 2.4V~3.0V 2.3V~3.6V
Working humidity 95 % MAX 95 % MAX
Working temperature -20℃ to 85 ℃ -40℃ to 105℃
Storage temperature -40℃ to 125 ℃ -40℃ to 125℃
Pressure range 0 ~ 92 psi (100~640 KPa) 0~130psi (0~900KPa)
Temperature range -20℃ to 85 ℃ -40℃ to 105℃
Operating frequency 2400MHz~2483.5MHz 315MHz/434MHz dual band
RF transmitter power 4 dBm MAX 6dBm MAX
Weight 24g(body)+14g(valve) 24g(body)+13g(valve)
Waterproof IP67 IP67
Product Parameters

Model：CRP339
Main Functions
Diagnostic Function Reset Function
Read DTC Engine Oil Reset
Clear DTC Electronic Brake Reset
Read Data Stream Steering Angle Reset
Read ID Information BMS. RESET
Full System Diagnosis DPF RESET
TPMS RESET

Parameters CRP339 CRP329
CPU 1.3GHz Quad-Core 1.0GHz Quad-Core
OS Android 7.0 Android 6.0
Battery 3500mAh 3450mAh
Display 7 inch IPS 1280x720 7 inch 1024x600
RAM 2GB 1GB
ROM 16GB 16GB
Support Wi-Fi、BT 4.0、Camera Wi-Fi、BT 、Camera
Product Size 246.5 x 138 x 47.1 (mm) 248 x 116 x 45.0 (mm)
Product Parameters

Model：X-431 ADAS
The Vehicle Advanced Driver Assistance System
Calibration Tool
Works in conjunction with the LAUNCH scanners for
calibration of camera- and radar-based ADAS
systems.
Used to recalibrate the camera and radar, when it
has been removed, replaced or repaired

Compatible Equipment
X-431 PAD II X-431 PAD IIIX-431 PRO3
Product Components
Calibration Frame Wheel Clamps(x2)
Calibration Panel Radar Reflector

Calibration Sensors
• Radar
• Front Camera
• Mirror Camera
• Rear Camera
• All-around Camera
• Night Version Camera
Vehicle Coverage
• Mercedes
• BMW
• Audi
• VW
• GM
• Ford
• Mazda
• Renault
• Lexus
• Infiniti
• Toyota
• Honda
• Nissan
• Kia
• Hyundai
• ……

Calibration Panels for Front Camera
VAG-FC(LAC01-02) HONDA-FC(LAC01-04)MERCEDES-FC(LAC01-01) HONDA-FC(LAC01-03) TOYOTA/LEXUS-FC(LAC01-05) DAIHATSU-FC(LAC01-14)
NISSAN/INFINITI-FC(LAC01-07) NISSAN/INFINITI-FC(LAC01-08) ALFA GIULIA-FC(LAC01-11)HYUNDAI/KIA-FC(LAC01-09) MAZDA-FC(LAC01-10) MERCEDES-NV(LAC07-01)

Calibration Panels for All-around Camera
VAG-ARC(LAC04-04)HONDA-ARC(LAC04-01) MERCEDES-RFK(LAC04-08-01) MERCEDES-RFK(LAC04-08-02)
MERCEDES-RC(LAC02-02)MERCEDES-RC(LAC02-01) VAG-RC(LAC02-03)
Calibration Panels for Rear Camera

Product Features
• The modular structure and useful accessories enable you to configure the tool in the best
way to suit your workshop.
• Easily and precisely adjust calibration frame to ensure vehicle is correctly centered.
• Multiple calibration function, wide car model coverage.
• All kinds of vehicle-specific calibration panels are available.
• Provide the instruction before beginning a calibration procedure.

Infrared Thermal Imager
TIT-201 is an infrared thermal imager combining surface
temperature measurement and real-time thermal image. Every
component of the traditional infrared thermometer should be
measured one by one, while it is not required for the thermal
image. Through the infrared detectors and optical imaging lens,
the thermal imager captures infrared ray and other types of rays,
converts the radiation information into image, and clearly
displays on the color screen, which helps users quickly and
accurately locate the center point measurement cursor and
measure temperature, thus locating the problem and greatly
saving time.

Product Details
Back of product USB interface at the
side of product
Buttons on the
front of product

Visible light
combined
with infrared
images
Super
sensitivity
of 0.07
degrees
Five
modulated
imaging
modes
3.2 inch TFT
high definition
color screen
Built-in 3G
storage, can
store 20,000
pictures
0.5m~40m
imaging
distance
Product Features and Details

Item Launch TIT-201 Snapon EETH 300
Display screen 3.2 inch TFT display, resolution
320X240
3.5 inch TFT display, resolution
320X240
Image storage format JPG BMP
Storage Can store 20000 pictures Can store 4000 pictures
Color palette Rainbow, iron red, cool color, black
and white, white and black
Rainbow, iron red, grey, cold and hot
Visible light camera 300000 pixels /
Infrared image
resolution
220X160 80X60
Battery 2000mAH 2000mAH
USB interface Micro USB2.0 Micro USB2.0
Temperature
measurement range
-20 to 450 °C (-4 to 840 °F) -20 to 450 °C (-4 to 840 °F)
Dimension 223mmX105mmX90mm 215.9mmX96.8mmX50.8mm
Weight 389g 340.2g
Product Parameters

Snap On
EETH300
80*60
Launch
TIT-201
220x160
Snap On
EETH300
80*60
Launch
TIT-201
220x160
Vehicle front wheel Vehicle inertia

In automotive application, some devices may have
slight defects such as tiny cracks, and the diagnostic
device cannot detect them. The infrared thermal
imaging technology can reflect the slight defect as small
temperature difference. TIT-201 can be used as an
auxiliary tool, so as to achieve better diagnostic results.
Thermal Imager Application
X-431 PAD V TIT-201 thermal
imager

01 02
04
05
03
06
Application
Brake system fault
diagnosis
Others: bearing system
of vehicle chassis,
electrical device, etc.
Body heating
wire inspection
Engine fault
diagnosis
Vehicle
exhaust pipe
test
Body air
tightness test
Thermal Imager Application

Model：X-931
• Touchless Wheel Aligner
• a kind of equipment which can
accurately measure the wheel
alignment parameters without any
component touching with the vehicle
tire or wheel rim.

Advantages：
• Easy to measure, greatly reduce the work frequency and
intensity (unnecessary to mount and demount the wheel
clamps and the targets) ;
• Greatly increase the measurement work efficiency
(unnecessary to perform the vehicle-pushing
compensation operation);
• Real touch-less measurement, no any injury to the wheel
rim，improve customer satisfaction;
• Measurement data accurate and real-time, adopts
advanced technology of laser image processing;

Unnecessary to mount and demount the wheel
clamps and the targets

Unnecessary to perform the vehicle-pushing
compensation operation

Real touch-less measurement, No any injury to
the wheel rim

Measurement data accurate and real-time,
adopts advanced technology of laser image
processing

Alignment Parameters Measurement Range
Total Toe-in ±20︒
Individual Toe-in ±10︒
Camber ±10︒
Caster ±20︒
Kingpin inclination ±20︒
Thrust Angle ±5︒
Measurement Parameters

Equipment Parameters
Technical Index Description
Wheelbase For passenger vehicle and light commercial vehicle, from
1800mm to 3750mm (Four-post lift)
Input Voltage 100～220V AC (10A)
Input Frequency 50～60Hz
Power 0.5KW
Others Computer host, LCD display(32‘’), keyboard & mouse;
Measurement software;
Printer and loudspeaker, etc.
Suited for light commercial vehicle

Model：X-861(3D Wheel Aligner)
Features:
• 3D measurement technology , more accurate, and more
stable
• Specialized camera system
• Equipped with the targets without electronic elements
• No necessary to calibrate
• User-friendly software interfaces, easy to operate
• Smart measurement with fully automatic tracking and
moving function according to the height of the lift

Measurement Parameters
Alignment Parameters Measurement
Range
Measurement
Accuracy
Total Toe-in ±20︒ ±0.02︒
Individual Toe-in ±20︒ ±0.02︒
Camber ±12︒ ±0.02︒
Caster ±25︒ ±0.05︒
Kingpin inclination ±25︒ ±0.05︒
Flinch Angle ±10︒ ±0.01︒
Thrust Angle ±10︒ ±0.01︒

Product components
No. Name Amount Unit
1 Lateral beam assembly 1 Set
2 Post assembly 1 Set
3 Cabinet assembly 1 Set
4 Clamp & Target assembly 1 Set
5 Computer (Optional) 1 Set
6 Printer (Optional) 1 Set
7 Turn tables 2 Set
8 Steering wheel holder 1 Set
9 Brake holder ，etc 1 Set

Model：CNC-603
Injector Cleaner &Tester
• New Plastic Molds
• An advanced electromechanical product, which can
clean and test injectors by simulating engine working
conditions
• Can also perform cleaning on the injectors and fuel
supply system on vehicle

Features
• Ultrasonic cleaning
• Uniformity/Sprayability test
• Leakage test
• Injecting flow test
• Auto. test
• On-vehicle cleaning

1 1
2
3
Innovative three-in-one
Cabinet, Adapter box and
Cleaning box are an integral
whole
OldNew

Adapters are distinguished according
to colors.

The glass tubes are changed with
plastic tubes.
More convenient for transportation.

Smaller
--Compared with CNC-602A;

Packing box smaller
--Compared with CNC-602A;

Model：CAT-501S
Auto Transmission Cleaner and Fluid
Exchanger
• Cycle cleaning with detergent
• Equivalent exchange with high accuracy
• 5 inch display
• Fluid exchanging result customized printing
• Free full set of vehicle connectors upgrading globally
• Fluid level adjustment
• Filter replacement warning

Model：TWC-421(Tire changer)
Specifications：
• Input Voltage Options: 220V/ 230V/
380V/400V
• Working Pressure:0.8-1MPa
• Wheel Width:4-13"
• Working Table Size:9-22"
• Max. Wheel Diameter:1050mm
• Packing Size:1150*900*950mm
• Lifting Bracket option

Model：TWC-521(Tire changer)
Specifications：
• Input Voltage Options: 220V/ 230V/
380V/400V
• Working Pressure:0.8-1MPa
• Wheel Width:4-13"
• Working Table Size:9-24"
• Packing Size:1150*950*980mm

Matched Assistant Arm --4A and 5A：
4A（Matched TWC-421） 5A（Matched TWC-521）

Model：KWB-421(Tire Balancer)
Specifications：
• Working Voltage:220V
• Rim Diameter Range:12-24"
• Wheel Width:1.5-22"
• Balance Cycle:7s
• Balance Speed:180rpm
• Max. Wheel Weight:75kg
Manual Input Parameters.

Specifications：
• Working Voltage:220V
• Rim Diameter Range:10-30"
• Wheel Width:1.5-22"
• Balance Cycle:7s
• Balance Speed:180rpm
Automatic Measure Two Parameters.

Specifications：
• Working Voltage:220V;
• Rim Diameter Range:12-24";
• Max. Wheel Diameter:650mm;
• Wheel Width:1.5-22";
• Balance Cycle:7s;
• Balance Speed:180rpm;
Automatic Measure Three Parameters; 19"LCD

golo AIT4
Vehicle On-Board Diagnostic Tool

Working Voltage DC 9-18V
Working Current <180mA(@DC 12V)
Processor MTK6735，1.3GHz four-core
Communication Network LTE-TDD/LTE-FDD/WCDMA
Support Band WCDMA: B1, B2, B5, B8
LTE-FDD: B1, B3, B5, B7
LTE-TDD: B38, B39, B40, B41
Interface Standard OBD II
Standby Power Consumption <15mA(@DC 12V)
Memory RAM 1G, ROM 8G
Working Temperature -20°C ~ +50°C
Positioning Mode Support GPS/ base station /AGPS/ wi-fi /BT hybrid positioning
Positioning Error Positioning accuracy 10M
GPS Positioning Time Cold start: ≤60S hot start: ≤3S
Overall Dimension 67.6*46.9*23.7（mm）
Product Parameters

Artificial Intelligence Diagnosis
Trip management
Full-automatic and system-wide
detection
Extremely simple operation
Support remote diagnosis
Vehicle alertAIT

Vehicle Info.
Equipment Info.
Test Result
Red (vehicle abnormal)
Black (vehicle normal)
Report

Test Report
Version info., DTC
and Datastream
Remote Diagnosis
The technician can
click [Remote
Diagnosis] button to
diagnose the vehicle
remotely.

Functions
Remind user to make payment 7 days before the expiration date.

Functions
Close software service if dealer doesn’t receive payment on time, dealer can
reopen software service if user pay off debt .

Functions
Search and export data from server.

Functions
Remind user to connect internet and install latest software if app keeps offline more than 5 days.

Functions
Close software service automatically if app keeps offline more than 15 days.

Launchtech India

More Related Content

Similar to Launchtech India (20)

Recently uploaded (20)

Launchtech India