Learn scratch-programming-e book

ShallWeLearn | http://shallwelearn.com
1
‘
Scratch
Programming
By Jessica Chiang

2
Content Index
Introduction: What is Scratch? .......................................................................4
Lesson 1: Introducing Scratch and Creating Sprite.....................................5
Step 0: Learn What Can You Do with Scratch......................................5
Step 1: First Look at Scratch.....................................................................6
Step 2: Create Your First Sprite ................................................................8
STEP 3 CREATE BACK, LEFT SIDE, and RIGHT SIDE VIEWS.....................11
Lesson 2: Animating a Sprite (Dance) .........................................................15
Step 1: Dance ..........................................................................................15
Step 2: Finishing and Testing ..................................................................18
Step 3: Kick Up a Notch..........................................................................19
Lesson 3: Adding Music (Dance to the Beat).............................................21
Step 1: Dancing and Popping ..............................................................21
Step 2: Hip-Popping ................................................................................22
Step 3: Wrapping it up............................................................................24
Lesson 4: Create a Music Sprite....................................................................25
Step 1: Create a Music Sprite................................................................25
Step 2: Move Music Loop to the Music Sprite.....................................28
Step 3: Turn Music On and Off...............................................................30
Lesson 5: Working with the Stage.................................................................33
Step 1: Create a Simple Scene .............................................................33
Step 2: Adding Simple Movement Scripts to Sprites ..........................34
Step 3: Do the same for Donut Man and Donut ................................36
Step 4: Test................................................................................................38
Lesson 6: Create Music with Music Tool Kit & Audacity............................39
Step 1: Create a Tune using Sound Tool Kit.........................................39
Step 2: Create a Sound Clip using Audacity ......................................41
LESSON 7: TURN YOURSELF TO A SPRITE USING GIMP.................................48
Step 1: Get GIMP.....................................................................................48
Step 2: Load a Photo of Yourself to GIMP ...........................................49
Step 3: Select Yourself in the Photo Using Free Select Tool...............50
Step 4: Delete the Background.............................................................53
Ste 5: Save the Result Image.................................................................55
Step 6: Import Yourself to Scratch.........................................................57
LESSON 8: PROJECT – MANIKIN DANCE.......................................................61
Step 1: Create the Manikin Parts ..........................................................61
Step 2: Connect Body Parts Together..................................................63

3
Step 3: Create Multiple Dancing Postures...........................................66
Step 4: Make It Dance............................................................................72
Lesson 9: The Pong Game.............................................................................74
Step 1: Understand how the Pong Game works................................75
Step 2: X-Y Coordinate System and Rotation in Scratch ..................78
Step 3: Modify the Pong Game ............................................................80
LESSON 10: STORIES TO ANIMATION PART I..................................................82
Step 1: Create a Story Line ....................................................................82
Step 2: Create Sprites .............................................................................83
Step 3: Creating the Village Background ...........................................84
LESSON 11: STORIES TO ANIMATIONS PART II.............................................101
Step 1: Get to Know Your Stage .........................................................101
Step 2: Put Storyboard Together.........................................................103
Step 3: Create Scene Transition Using Broadcast Messages..........105
LESSON 12: SCROLLING PLAFORM GAME – Game Design.....................117
LESSON 13: SCROLLING PLATFORM GAME – SPRITES ...............................123
LESSON 14: SCROLLING PLATFORM GAME – GAME RULES .....................135
LESSON 15: Scrolling Platform Game – Platforms.....................................144
Lesson 16: Mini Mario Game Part 5 – Scrolling Intro ................................158
Lesson 17: Platform Game Wrapup ...........................................................167
Step 1: Create a Variable to Represent Scrolling Amount.............167
Step 2: Make Platforms Scroll...............................................................168
Step 3: Modify the Brick and CoinToPass to Stop Them from
Following Mario......................................................................................171
Step 4: Upgrade the Bullet and Turn Brick to a Mini Platform ........174
CONCLUSION ................................................................................................177

4
Introduction: What is Scratch?
Scratch is developed by the Lifelong Kindergarten group at the MIT
Media Lab. Here is how Scratch website describes Scratch.
"Scratch is a new programming language that makes it easy to create your
own interactive stories, animations, games, music, and art -- and share your
creations on the web."
I started to use Scratch about one and half year ago and am amazed at how
well it's designed. I've been a professional programmer for more than 8 years
and started to use Scratch to teach my 9-year-old boy and his classmates to
program. I also used it to create small educational software for kids. I am
amazed at how well Scratch is designed and how fun it is to use. With this
series, I aim to guide you, step-by-step, to go from creating animating Sprites
(Lesson 1 to Lesson 4), the Stage (Lesson5), using Scratch multimedia
tools(Lesson 6 and Lesson 7), creating 2D animations (Lesson8 to Lesson9),
then finally to creating a scrolling platform Scratch Game (Lesson 10 to
Lesson15). To showcase your creation, I will show you how to share your
projects, both on Scratch site and on your own Google Site to display (Lesson
16).

5
Lesson 1: Introducing Scratch and Creating Sprite
Have you heard of Scratch? No, not what you do to your itch, but Scratch from
MIT the famous school for the curiously brainy people? If you have not heard,
seen, or played with Scratch, then you’ve been missing out. Because it is a log
of FUN!!!
Step 0: Learn What Can You Do with Scratch
Scratch is a programming language for all, even for kids. In fact, Scratch,
unlike all other programming languages, is designed first and foremost for
kids. Because it’s designed for kids, it’s very easy to learn and use. They can
create animations like never before. For older kids or teens, they can create
single-level or multi-levels Scratch games.
But Scratch is not just for kids or teens. Teachers and adults can use Scratch
to create effective education tools such as math quiz, physics simulation, and
educational videos.
Since I knew about Scratch from a coworker, I have been using Scratch,
teaching Scratch, and now writing on Scratch. As you can tell, I just cannot
get enough of Scratch. I have two school-age boys and I’ve been looking for
ways to quickly create games and animations to help them learn. Scratch is
what I’ve been looking for and more. It’s just a tool so awesome, so fun, and
so easy to use and master, that I am sure, once you start, you will be just like
me: Can’t Get Enough!

6
Without further ado, let’s start using Scratch!
Step 1: First Look at Scratch
Start Scratch Program. Sprite Preview lets you preview a project. Sprite
Selection and Creation lets you select an existing Sprite or create a new
Sprite. Sprite Editor lets you edit a Sprite’s Scripts, Costumes, and Sounds.
Tool Box is like a bucket of Lego; it provides single script blocks for building
combo script blocks.
Let’s take a look at available sample projects. Click “Open” on the top of the
Scratch window.

7
If “Projects” not already selected, click “Projects” to go to the default Scratch
projects directory. You’ll want to try “Animation” and “Games”.
My favorite from the sample projects are “Daydream” from Animation folder.
Try opening it. I am sure you will like it too.

8
Step 2: Create Your First Sprite
Now let’s create our first sprite. Delete the cat sprite by right click on “sprite1”
and select “Delete”. Then click the (“Create new sprite” button) to open
the Paint Editor. I created this sprite using these tools:
Paintbrush
Line Tool
Eraser
Text Tool
Fill Tool
Select Tool
Rectangle Tool Stamp Tool
Ellipse Tool Eyedropper
Click Ellipse Tool ( ) and click hollow mode ( ). Draw three
circles.

9
Click Ellipse Tool ( ) and click solid mode ( ); draw a little
dark solid circle inside the medium circle, which will be the eye. Use Eraser
tool ( ) to trim the smallest circle; this will be the ear.
Click Stamp Tool ( ) button and select the eyeball to copy. Drag the eyeball
copy to where you want the new eyeball to be. Do the same for the ear to
make two ears.

10
Use Fill Tool ( ) to fill the face and the eye ball.
Click Select Tool ( ) button and select both eyes; move them to the face.
Click Select Tool ( ) button and select left ear; drag it to its place.

11
Click Select Tool ( ) button and select the right ear; click to flip it. Then
drag the right ear to its place.
Click Eyedropper Tool ( ) and click the face to copy the face color. Click Fill
Tool ( ) and fill both ears with the face color.
Once you are happy with your own Virtual Me, click OK to save. Rename the
costume to “front”. This is the front view.
STEP 3 CREATE BACK, LEFT SIDE, and RIGHT SIDE VIEWS
To create back view, make a copy of costume “front” (click “Copy” button next
to costume “front”). Use Erase tool to erase eyes and mouth. Use Eyedropper
tool to copy the face color. Then use Fill Tool to paste the color in the empty
area. Click OK to save. Rename this costume as “back”.

12
1 2
3 4
Then copy the costume “back”. Erase extra body parts. Redraw body parts.
Refill color of the face and the pants using Eyedropper Tool and Fill Tool. Click
OK to save and rename this costume as “facing left”
1 2

13
3 4
Copy the costume “facing left” and click to flip the figure horizontally.
Click OK to save and rename the costume as “facing right”.
1 2
We’ve just created four costumes for the same sprite: “front”, “back”, “facing
left” and “facing right”.

14
THIS CONCLUDES TODAY’S LESSON. IN NEXT LESSON WE WILL MAKE HIM
DANCE.

15
Lesson 2: Animating a Sprite (Dance)
In Lesson 1, we created a sprite and also created four costumes: “front”,
“back”, “facing left”, and “facing right”.
In this lesson, we will make our sprite dance.
Step 1: Dance
Open the “dance” project that we created in Lesson 1. Click “Sprite1” and
change its name to “dancer1”.

16
Click “Scripts” tab. Sprite “dancer1” doesn’t have any script blocks. Click
“Control”.
Then drag out “forever” script block and drop it in the script editor.

17
Click “Looks”. Drag out “next costume” block and drop it inside “forever” block
to form a combo block.
Now double click this combo block to see dancer1 spin like crazy!
We need to slow him down! To do so, click “Control” again. Drag “wait 1 secs”
and drop it under “next costume”. Now double click the combo block again.

18
Step 2: Finishing and Testing
We are almost done with creating our first animation. To wrap it up, drag
“when clicked” and drop it above “forever” block. Now click the button
to start the animation. switch
We are done with the first animation. Try viewing in full-screen mode or
“presentation mode” by clicking .

19
Step 3: Kick Up a Notch
You can add more costumes or make dancer1 dance faster. I added two extra
costumes: “front2” and “back2”. I also change “wait 1 secs” to “wait 0.5 secs”
to make dancer1 dance faster.

20

21
Lesson 3: Adding Music (Dance to the Beat)
In this lesson 2, we make our sprite dance. In this lesson, I will show you how
to make him dance to the beat. And not just to the beat but to the Hip-Pop
beat!
Step 1: Dancing and Popping
Open project “dance”. Select sprite “dancer1” and click “Sound” button.
Drag “play sound pop” block and drop it under “next costume” block. Now click
to play.

22
Step 2: Hip-Popping
Fun, huh? But try listening to it for 5 minutes – it gets a bit boring. One can
only take this much “popping”. This calls for a twist to the music clip. Let’s
fancy it up!
Go to Sounds Tab, and click “Import” button. When “Import Sound” window
opens, click “Sounds” button.
Select “Music Loops” folder.

23
Click each clip to listen to the demo. “DrumMachine”, “HipHop”, and
“HumanBeatbox1” are among my favorites. So I think they are cool enough
for our first loop. Import all three. Delete the less interesting “Pop”. Now the
Sounds editor for sprite “hip-pop” should now look like the snapshot below.
Go back to Scripts Tab. First drag a forever block from Control Tool Box and
drop it anywhere in the editing box. Then drag a play sound _____ until
done block and drop it inside the forever block. Drag two other play sound

24
______ until done blocks and drop it under first play sound _____ done
block. Select sound for each block to your liking. Double click this combo block
to test.
Step 3: Wrapping it up
Remove the “play sound pop“ block from the motion combo block. Then add a
“when clicked” on top of the music combo block.

25
Lesson 4: Create a Music Sprite
In this lesson, I will show you how two sprites can communicate with each
other via variables. We will use the dancer sprite created from Lesson 3 but
extract its music playing scripts to a new sprite call Hip-Pop.
Step 1: Create a Music Sprite
Let’s create a Music Sprite or a sprite that controls playing and stopping of
background music. To create a new sprite, click to open Paint Editor.

26
Instead of drawing our own, this time we will import an image. Click “Import”.
Click “Costumes” if it’s not already selected. Then open “Things” folders.

27
Select “drum1” or whatever image you like. Then click “OK” to save.
Rename this new sprite to “hip-pop”. It’s seems big for me so I shrink it with
“Shrink Sprite” tool.

28
Then use “Move” tool to move the “hip-pop” sprite to wherever you see fit.
I place it next to dancer1’s feet.
Step 2: Move Music Loop to the Music Sprite
Drag the Music Combo Block from dancer1’s Scripts Tab.

29
Drop it to be over sprite “hip-pop” icon. Wait until the “hip-pop” sprite is
highlighted before releasing the mouse.
Sprite “hip-pop” now has the music combo block from “dancer1”.
Delete this same combo block from “dancer1” so there will not be echoing.

30
Step 3: Turn Music On and Off
To turn music on and off, we need to create a virtual switch. Like a real switch,
a virtual switch can be on or off. To create a virtual switch, we use Variables.
Select “Variables” Tool Box, and click “Make a variable” button. Then enter
“switch” for Variable name.
I would like this switch to work this way:
When the animation first starts, the music is playing and
the switch is on. Click the “dancer1” sprite to turn it OFF,
and click the “hip-pop” sprite to turn it ON again. If the
switch is ON, music is ON; if the switch is OFF, music is OFF.

31
For this switch to work, we need following blocks:
one block from tool kit
For sprite, we will add three new combo blocks. The first combo block
turns the switch ON (set music on to 1) when is clicked.
The second combo block turns the switch ON (set music on to 1) when
“hip-pop” is clicked.
Finally, the third combo block keeps checking if the switch is OFF (switch = 0).
If OFF, then stops all sounds.

32
For sprite, we will add one combo block. This combo block will turns
the switch OFF if “dancer1” is clicked.
The Scripts tab of your “dancer1” sprite should look like this.
The Scripts tab of your “hip-pop” sprite should look like this.

33
Lesson 5: Working with the Stage
A scene, like a movie scene, sets the tone of the story and provides a platform
for the characters in the story.
Step 1: Create a Simple Scene
To create a scene, we change the costume of “Stage”. We will add two houses
and a plate to the “Stage”. To do so, double click the Stage icon to select. Then
click “Costumes” and select the only costume, “background1” and hit “Edit”
button.
Change the costume by adding two houses and a plate. When done, hit “OK”
button.

34
Step 2: Adding Simple Movement Scripts to Sprites
If you have not already, create three sprites: Mr. Meow, Donut Man, and
Donut. Now let’s add scripts so that all sprites will show up in the right places
when the animation starts (when the Start Flag is clicked).
Move Mr. Meow around on the stage and its x-axis and y-axis values would be
updated accordingly.
A cool feature is that when sprites are moved, the Motion blocks in the Tool
Box are updated as well.

35
To build Mr. Meow’s scripts, select Mr. Meow from the Sprites Area, then click
“Scripts” tab.
From the Tool Box, click the “Control” button and drag “when Start Flag
clicked” block to drop it in Scripts work area.

36
Then click “Motion” button in Tool Box Selection and drag “glide 1 secs to
x:-183 y:-110” to the Stage. Then attach it under the “when Start Flag
clicked” block.
Then click “Looks” button in Tool Box Selection, and drag “switch to costume1”
to the Stage. Then attach it under the “glide 1 secs to x:-183 y:-110”.
Step 3: Do the same for Donut Man and Donut
In the same way, create the following script for the Donut Man and the Donut.
Drag each sprite to a spot you like. I dragged my sprites as shown in the
snapshot below but yours will probably be a bit different than mine. It’s OK. Or
you can enter the x-y values by hand so they are exactly the same as mine.

37
Below is what result scripts should look like. Again, your x-axis and y-axis
values might be different than mine - it’s OK. Mr. Meow will glide to x:-184
y:-110 after 1 second and then switch to costume “costume1”.
Donut Man will glide to x:-172 y:114 after 1 second and then switch to
costume “regular”.

38
Donut will glide to x:-3 y:17 after 1 second and then just show.
Step 4: Test
TEST: Move sprites around in the Stage and clicking to see all of the
sprites gliding back to their positions.

39
Lesson 6: Create Music with Music Tool Kit & Audacity
In lesson 6, I will show you how to create a tune using Scratch’s
Sound Tool Kit. Moreover, I will also show you how to use Audacity®
to create a Scratch sound clip from a MP3 or WAV file.
Step 1: Create a Tune using Sound Tool Kit
To add a music script to a sprite,
select a sprite and click Sounds
Tab.
Drag out a “play note ? for ?
beats”. Click the down arrow to
bring up the keyboard.

40
To create a simple tune that goes Do-Re-Mi, make a script combo
block like the one below. DOUBLE CLICK this block to test it.
To add pause between notes, use the block.
This is the script which plays the tune of Twinkle, Twinkle Little
Star.

41
Step 2: Create a Sound Clip using Audacity
Creating a song using Sound Tool Kit is fine but it takes too much
time. Let me clue you in on this wonderful tool called Audacity.
Audacity® (http://audacity.sourceforge.net/) is free, open source
software for recording and editing sounds. It is available for Mac OS
X, Microsoft Windows, GNU/Linux, and other operating systems.

42
Audacity provides many cool features but I am only going to show
you this one trick today. I will show you how to record music played
on your computer and turn it to a Scratch sound clip or a wav file (no
file converter required!).
Start by playing your favorite song using your favorite
player.
Or play online streaming music.

43
To record the music played on your computer, select “Stereo Mix”.
Then hit the “Record” button. Sound waves will start to appear.

44
Once you’ve record enough music, click STOP to stop recording.
To export the recording as WAV file to be used in a Scratch project.
Select “File”->”Export As WAV”.

45
Save the recording in “My Music” as “MyClip.wav”.
To import to a sprite, select the Sounds Tab and click “Import”.

46
Click “Music” button to go to “My Music” folder and select the clip
we’ve just recorded.

47

48
LESSON 7: TURN YOURSELF TO A SPRITE USING
GIMP
This project is great for a lazy Saturday or Sunday afternoon. I will
show you how to turn yourself into a Sprite and to do something cool
in a Scratch program. If you have followed the Scratch Programming
Series, then this lesson will be pretty simple for you but it'll be a lot of
fun!! What you need is a photo of yourself, GIMP, and Scratch.
Step 1: Get GIMP
GIMP is a free image editing software that you can download from
GIMP site (http://www.gimp.org). You might have heard of Adobe
Photoshop, a great commercial product (but quite costly)

49
Step 2: Load a Photo of Yourself to GIMP
These are three pictures I took of my son who was bravely trying a
handstand (and as you can see, he needs a bit more practice). I will
use the first photo. Get a picture of yourself and let’s start!
1 2 3
First, open the photo by going to "Open". Then select the photo.

50
This is what GIMP interface looks like after the photo has been loaded.
Step 3: Select Yourself in the Photo Using Free Select Tool
What we are doing today is to simply crop the people image we want
and delete the background. Once an image is cropped, we can export

51
it and then use it in Scratch as a sprite or as an image in a funny
background. I will show you how to do both in this lesson.
Use the Free Select tool to select the figure. Each time you click, a
blue circle will be added around the figure. Keep doing so until you've
made a FULLY ENCLOSED area around the figure.
While selecting an image by clicking around it, you would see a thin
white line around it as you click.

52
When the selection is completed (a fully enclosed area is made), then
a dotted line will blink on and off around the selected figure. The
dotted line is shown below in red to emphasize the selection but in
reality, it’s white dotted line.

53
Step 4: Delete the Background
Then do "Select"->"Invert" to select the background and hit the
"Delete" button on your keyboard to delete it.
Now the selected background will become blank or filled with white.

54
Select the figure by doing "Select"->"Invert" again to select the
image. And then click "Edit"->"Copy" to copy the figure. Create a new
image with this copied figure by doing "File"->"Create"->"From
Clipboard".
You should see yourself and no background (transparent
background).

55
Ste 5: Save the Result Image
Now we are ready to save. Go to "File"->"Save As…".
Select the GIF image file type and name it "down.gif". Then click
"Save".

56
Click "Export" to continue.

57
Keep the default selection and click "Save" to finish saving.
Step 6: Import Yourself to Scratch
Now we are ready to create a new Sprite using the saved image. Click
"Paint New Sprite".

58
Select "down.gif" and click "OK".
Click "OK" to save the new Sprite.

59
If the sprite is too big, use the Shrink tool.
We are done! Now you know how to a person in a picture to a sprite.

60

61
LESSON 8: PROJECT – MANIKIN DANCE
You probably have a wooden manikin in your house or you've seen
one in an Art store. Today we are going to create a Scratch manikin
and teach him/her to break dance. Why break dance? It's cool and
easier to animate.
Step 1: Create the Manikin Parts
Let's Start! First, create a new Sprite by clicking the "Creating a New
Sprite".

62
Select the Ellipse Tool with Hollow mode. Create circles for different
body parts.
Color each body part using Fill Tool.

63
Step 2: Connect Body Parts Together
Then use Select Tool to select each body part and connect with each
other.

64
This is the snapshot of arms and legs
Use Select Tool and Rotation Tool to rotate the body parts and connect
them to for a body. You can also Shrink Tool to shrink the arms and
legs for better proportion.

65
Use the Select Tool to first select the arms Rotate Tool to rotate the
arms.
Connect all body parts to form our Manikin!

66
Step 3: Create Multiple Dancing Postures
Click OK to save and rename the costume to "no-arm-up".
Use the Select Tool to select the forearm and then use the Rotate Tool
to rotate.

67
Drag the arm to reconnect it to the body.
Then rename the costume to "left-hand-up". Click "Copy" to make a
copy.
This is for costume "right-hand-up". Click "Edit".

68
Click the "Flip horizontally" icon to flip the manikin horizontally.
Rename the costume to "right-hand-up".
Next, we will create a costume named "both-hands-up".
Use Select Tool to select the left arm and then use Rotate Tool to
rotate it up. Reconnect the left arm to finish up this costume. Rename
the costume to "two-hands-up".

69
Next, we will create a costume named "right elbow up". Use Select
Tool to select and Flip Tool to flip.

70
Rename this costume to "one-elbow-up" and then click "Copy" to
make another copy.
Edit "one-elbow-up2" by clicking the "Edit" button. Then click "Flip
horizontally" to flip the manikin.
Then rename this costume to "left-elbow-up".

71
This is the final lists of costume for the manikin sprite.

72
Step 4: Make It Dance
Now we are ready to make it dance!
Drag "when the green flag clicked", "forever", and "wait ? secs" blocks
from the Control Tool Kit to the Stage. Then drag "next costume" from
the Look Tool Kit to the Stage.
Build the combo block as followed.

73
Step 5: Test
Ready to dance! Click the green flag to test.
To kick it up a notch, add more dance moves such as handstand or
other floor moves.

74
Lesson 9: The Pong Game
In this lesson, we will modify a sample game named “Pong”. We will
add score, levels, and more balls to the game. To open the “Pong”
game, click “Open” and browse to Projects->Games, and then select
“Pong”. Click OK to open the Pong project.

75
Step 1: Understand how the Pong Game works
There are two sprites: ball and paddle. The ball sprite moves
randomly by its own, whereas the paddle sprite is moved by user
moving the mouse.
Click the green flag to try the game. Use the paddle to hit the ball as
it falls down. You should soon find that if the ball hits the bottom of
the Stage, the game would end.

76
The ball sprite has three combo blocks. You can think of a sprite as a
robot and each combo block as a separate motor. Just like a robot
is controlled by many motors, a sprite can be controlled by many
combo blocks. In Computer Science language, each combo block is a
thread of execution, working independently of the other threads.

77
In the picture shown left, first combo block controls how the game
would end - if ball touches red, then game ends.
The middle combo block checks whether the ball has touched the
paddle and takes action when it does.

78
The last combo block checks whether the ball has hit the edge and
takes action when it does.
Step 2: X-Y Coordinate System and Rotation in Scratch
The image below shows how a sprite moves in the Scratch stage
which is based on the X-Y coordinate system.

79
This sprite moves according to this script:
It works as shown in the image below. The red dot sprite first turns
45 degrees from the y-axis and then move 50 steps
Just to make it more clear, this is what it looks like if the red dot first
turns -45 degrees then move 50 steps.

80
This is the location of the red dot sprite before and after it turns 45
degree and moves 50 steps.
Step 3: Modify the Pong Game
Try changing the randomness by changing the value in pick random ?
to ? block. To make it more random and the game more difficult,
increase the range of the degree change.
BEFORE AFTER

81
Also, you can make the ball leave trace of its movement by using the
Pen Tool Kit.

82
LESSON 10: STORIES TO ANIMATION PART I
In this lesson, we will create an Animation. We will first create a story
line. Based on the story line, we will create sprites and scenes, and
finally add scripts to put together the story.
In this lesson, we will create a Cartoon Animation. We will first create
a story line. Based on the story line, we will create sprites and scenes,
and finally add scripts to put together the story.
Step 1: Create a Story Line
The first step to create an animation is to have an idea. It could be
from a joke you’ve heard or a story you recently read. Or better yet,
it could be entirely your own. I’ve created a really simply story as
shown below.
In a small village far, far, AND far away, there lived a little boy who
dreamed big.
Bobby was a 9-year-old kid who got bullied all the time by this crazy
bully and his sidekick.
Then he met Master Meow, the Kung Fu master. Bobby was under
intense training for many months.
Then Bobby entered Kung Fu competition at school and defeated the
bully.
From this simple story line, we have this “ingredient list” for our
animation:

83
Sprites Bobby, bully, sidekick , Master Meow
ScenesVillage, School, Training Ground, Fighting Stage
Step 2: Create Sprites
From this simple story line, we need these sprites:
SpritesBobby, bully, sidekick , Master Meow
By now, I trust that you should be pretty comfortable drawing your
own sprites, so we will just create our sprites by importing images
from Scratch library.
Create or import a sprite and name it “Bobby”. Add costumes: “front”,
“right”, “left kick” and “right kick”.
Add a new sprite and name it “bully”. Add costumes: “up”, “down”,
and “defeated”.
Add another new sprite and name it “sidekick”. Add costumes: “tease”
and “sad”.

84
Add yet another new sprite and name it “Master Meow”. Just give him
one costume: “happy”.
To create scenes, just add backgrounds for Stage. In the next step,
we will create four backgrounds: village, school, training ground, and
fighting stage.
Step 3: Creating the Village Background
Draw outline of mountains using Paint Brush tool. You can change the
default Brush Color.
Make sure to draw it all the way to the side of the canvas.

85
We need light blue for sky and light yellow for the sun light. To select
two colors, click first either Eyedropper Tool or Fill Tool to turn mouse
arrow to an eyedropper icon. Then select the light blue as foreground
color.
Click the two-ways arrow to switch colors, so that blue would become
background color.

86
Blue has become the background color. Select light yellow to be the
foreground color.
Click the Fill Tool button, and select Center Gradient
Fill.
Bring the little paint bucket icon to where you like the sun to be. I like
the sun to be at the upper left hand corner.

87
After filling, the Canvas should look like this.

88
Next, we will fill the mountains in the same way. We will first select
two color tones: light green for mountaintops, and darker green for
area further away, such as foot of the mountains or the mountain in
the shadow of the first mountain. But this time, we will use Top
Gradient Fill.
Bring the paint bucket icon to the tip of the mountain that is closer to
the Sun and click to fill.

89
This is the result of the color fill.
To make it obvious to viewers that this is the village scene, I also
added story line in text to the Canvas. Select Text Tool and click
anywhere in the Canvas.
To start typing, click Text Tool, and just start typing. You would see a
tiny black square box. It’s the text handle.

90
To move the text, move your mouse over to where the text handle is
and drag it.
Step 4: Creating the School Background
For school background, we will draw a old-school blackboard and
several wooden chairs.
Select Box Tool and Solid Box mode. Make sure the Fill Color is dark
green. Draw a solid green box.

91
Switch color so the main color will be black. Then select Box Tool and
Hollow Box mode. Create front of a table like shown below: one
horizontal rectangle on top as side of the table and two vertical
rectangles as legs.
Draw the table top and the side using Line Tool.

92
Then finish up the table outline by adding another two legs using Box
Tool in Hollow Box mode.
Finally, fill the table with wooden color using Fill Tool with Solid Fill.

93
To move this table, use Select Tool to draw a box around the table and
drag it.
Select Stamp Tool and draw a box around the original table to make a
copy. Drag the copy to where you like and click to drop the copy.
Repeat until you have enough tables that this look like a classroom. I
know there are not chairs but hey, tables are good enough.

94
Step 5: Importing the Training Ground Background
Training ground background is the easiest of all. We will just import it
from Scratch Background Library and rename it “training field”.

95

96
Step 6: Creating the Fighting Stage Background
First use Box Tool and Line Tool to create a fighting stage. Select the
Fill Tool and the Center Gradient Fill. Then select light blue as first
color and dark blue as second color.

97
Switch two colors and then select Solid Fill.
Fill the rectangular side with solid blue.
Fill the rest, except the diamond, with blue gradient fill. Use Fill Tool in
Top Gradient Fill mode.

98
Change first color to red and fill the diamond.

99
Next we will create shadowing effect by using light grey and black.
Select light grey as first color and black as second color. Then select
Top Fill Gradient.
Fill from the top of the Canvas.

100
We are done for this lesson. Go take a break and we will add scripts in
next lesson for scene transitions and sprite interactions.

101
LESSON 11: STORIES TO ANIMATIONS PART II
In this lesson, I will show you how to add scene transition to your
animation using broadcast message and "wait" control blocks.
Step 1: Get to Know Your Stage
A Stage is like a Sprite. A Stage can change its look, just as a Sprite.
A Stage can also think (such as doing math) and feel (such as
checking if a sprite is touching another on Stage), just like a Sprite.
Both Stages and Sprites can send and receive "messages", which will
be covered in this lesson.
The main difference between a Stage and a Sprite is that a Stage
cannot move. Other than that, a Stage is just like a Sprite. I am
already repeating myself but the following illustration should make
this painfully clear.
A Sprite changes costumes.

102
A Stage changes backgrounds.
Both a Sprite and a Stage can think and feel.
Moreover, both Stages and Sprites can send and receive "messages".

103
Now that we have gotten to know our stage a bit better, next we will
create backgrounds for the stage and
Step 2: Put Storyboard Together
First, we need to design the story board.
Scene 1 (the village background): Bobby stood in front of a remote
village
Scene 2 (school): Bobby was in class, being teased at.

104
Scene 3 (training ground): Master Meow trained Bobby.
Scene 4 (fighting stage): Bobby fought with the Bully and won!

105
Step 3: Create Scene Transition Using Broadcast Messages
Next, we will use Broadcast Messages to let actors (sprites) know
when and where to move.
Introducing Broadcast Messages
Each scene has a set of sprites and each sprite needs to know where
to go in a scene. Moreover, some sprites do not show up in some
scenes. To let sprites know when and where they will go as scenes
change, we will use Broadcast Messages.
A Broadcast Message is a message sent by a Sprite or a Stage, and
can be received by all Sprites. We will let Stage send out Broadcast
Messages. Click Control button from the Tool Kit.
Drag out a "broadcast" block from Control Took Kit and drop it in
Stage's Script Editor. Click the little down arrow and select a message
or create a new message.

106
To create a new message, click the "new…" from the popped bubble
and then enter "school" as message name. Click "OK" to save this new
Broadcast Message.
In total, we need these messages: "To School", "To Village", "To
Training Ground", "To Fighting Stage", "Done Laughing", and "Done
Training".

107
VILLAGE SCENE
Stage would change to "Village" background and sends out a "To
Village" broadcast message (to everyone). Upon receiving the "To
Village" message, Bobby shows up on Stage; all other sprites just
hide.

108
SCHOOL SCENE
Then the Stage would wait two seconds, change its background to
"School", and then broadcast a "To School" message. Upon receiving
the "To School" message, Bobby, bully, and sidekick all show up on
Stage. They also would change to appropriate costumes: Bobby
would change to "right" costume, bully to "up", and sidekick to "tease".

109
Moreover, the bully Sprite would say "Ha Ha" for two seconds. I know
it's not really serious bullying, but hey, verbal abuse is abuse
nevertheless. Once finished laughing, the bully would send out a
"Done Laughing" message.
The result snapshot of the Stage of this scene looks like this:

110
Upon receiving this "Done Laughing" message, Stage would change to
"Training Ground" background and broadcast a "To Training Ground"
message.
TRAINING SCENE
At the training scene, Bobby would spin-kick across the field for
several times and then sends out a "Done Training" message.

111
The result snapshot of the Stage of this scene looks like this:
Upon receiving this "Done Training" message, Stage would change to
"Fighting Stage" background and broadcast a "To Fighting Stage"
message.
FIGHTING SCENE
At the fighting scene, Bobby would kick (by repeatedly changing
between "fly kick left" and "fly kick right" costumes) Bully's until Bully

112
is defeated. To animate the bully being kicked, just repeatedly change
the bully's costumes between "up" and "down". Once the bully has
been kicked badly enough, he would say "OK OK You Win".
This is the snapshot of the Stage at the Fighting Scene:

113
3: Put Together Scripts for Each Sprite
Below are snapshots of scripts for all sprites. The Stage's scripts
handle changing backgrounds.
Master Meow's scripts are very easy because he just shows and hides.

114
Sidekick's scripts are also very easy because he just shows and hides.
Bobby's scripts involve showing, hiding, as well as fly-kicking.

115
Besides showing and hiding, the bully's scripts involve laughing and
being kicked down by Bobby.

116
Download the result project for this lesson HERE.
You may download the PDF version of the lesson HERE.
TEST TIME: Whew! We are done. Go ahead and test your first
animation. This concludes Lesson 9.

117
LESSON 12: SCROLLING PLAFORM GAME – Game
Design
In lesson 10 through 14, I will cover what you need to learn to make
a mini Super Mario game.
We will cover the following:
Designing a Game (Lesson 10)
Creating Game sprites (Lesson 11)
Adding Game Rules to Game Sprite (Lesson 12)
Changing Background when Mario Moves (Lesson 13)
Managing Score and Levels (Lesson 14)
After following these classes, you should feel very comfortable
creating your own game. Let’s start!
Here is a basic table that we need to fill in:
Game Name Mini Mario
Sprites List of sprites: name, costumes,
sounds, movements
Sprite Interaction How sprites interact in this game
Backgrounds The list of background doodles

118
here
Scores and Levels The score counter rule and level
advancement rule here
Let’s expand each item to its own table:
GAME NAME
Name Look Sound MovementSPRITES
Sprite1 Sprite2 InteractionSPRITE
INTERACTION
Name LookBACKGROUNDS
How How many pointsSCORE AND
LEVELS
Level Requirement Starting
Background
Ending
Background
LEVELS
You may download the PDF form of above table HERE.
Let’s fill in each table for this game:
GAME NAME Mini Mario

119
Name Look Sound Movement/
Action
Mario
-Walk1
-Walk2
-Jump Up
-Jump Down
-Jump
-Die
-Enter
-Score
-Grow
-Shrink
-Walk
-Jump
-Die
-Grow
-Shrink
Fruit
Platter
-Delicious None None
Princess
-Surprised
-Happy
-Happy
tune
-Jump up
and down for
joy
Brick
-Regular
-Cracked
-Crushed -Crushed
Bat
-Fly1
-Fly2
-Wing flap -Fly
Coin
-Spin1
-Spin2
-Spin3
-Bling-bling -Spin

120
Crab
Walk1
Walk2
-None -Walk
Sprite1 Sprite2 Interaction
Mario Brick
If Mario hand
hits Brick, then
Brick would
crack.
Mario Coin
If Mario
touches Coin,
Coin would
disappear and
Mario would
score 1 point.
Mario
Crab
If Mario
touches Crab,
he would die.
Brick Coin
When Brick
cracks, Coin
would show
spinning above
Brick
Mario
Stage
When Mario
hits the bottom
of the stage,
he would die.

121
Name Description
Level1_1
Solid ground, several bricks (to
be added from sprites), crabs
as enemies
Level1_2 Holes in ground, several bricks,
crabs as enemies
Level1_Passed
Fruit platter
Level2_1
Solid ground, several bricks,
bats as enemies
Level2_2
Holes in ground, several bricks,
bats as enemies
Level2_Passed
Princess
Level Requirement
for this Level
Starting
Background
Ending
Background

122
1 When the
game is
started
Level1_1 Level1_2
2 When Mario
grabs the Fruit
Platter in
Level 1
Level2_1 Level2_2
Whew!! We are done for the design stage. This may seem a lot of work
but it’s always a good idea to lay out the design in as much detail as
possible for your masterpiece, whether it is an animation or a game.
Once you take the time to design your game, the building part should
be straight forward.

123
LESSON 13: SCROLLING PLATFORM GAME –
SPRITES
In Lesson 2, we will create all necessary sprites for Mini Mario game.
Especially, we will focus on Mario and show how to make him walk,
jump, and squat.
1. Create Fruit Platter sprite
Name Look Script How to Create
1. Fruit
Platter
-DeliciousNone Import costume from
library
Import the Fruit Platter image by clicking then select
COSTUMES->THINGS. Scroll to select fruit_platter and click
OK to save. Rename the costume as Delicious. Save this sprite as Fruit
Platter.
2. Create Princess sprite
2. Princess -Surprised
-Happy
-Jump for
Joy
1. Import first costume
from library
2. Create another

124
costume based on the
first costume
3. Create Jumping for
Joy script
Import the image from Scratch library by clicking then select
COSTUMES->PEOPLE. Scroll to select squaregirl and click OK
to save. Rename this costume as Surprised and modify
Surprised to become Happy .
Add a script to keep changing to next costume.
Save this sprite as Princess.
3. Create Coin sprite
3. Coin -Spin1
-Spin2
-Spin3
-Spin 1. Create custom
costumes
2. Import sound
3. Add Spin script
Create three costumes:
Spin1 , Spin2, and Spin3 .
Add a script to create the spinning effect:

125
Save this sprite as Coin.
4. Create Brick Sprite
4. Brick -Regular
-Cracked
-Crushed 1. Create custom
costumes
2. Import sound
3. Create Crushed
script
Use to create a new Sprite which has two costumes: Regular
and Cracked.
Save this sprite as Brick.
5. Create Bat Sprite
5. Bat -Fly1
-Fly2
-Fly 1. Import both
costumes from the
library
2. Import sounds
3. Add Fly script

126
Import the image by clicking then select
COSTUMES->ANIMALS. Scroll to select and ; save
them as Fly1 and Fly2.
Add a script to simulate the wing flapping:
Save this sprite as Bat.
6. Create Crab sprite
6. Crab -Walk1
-Walk2
-Walk 1. Import Walk1 from
library
2. Create Walk2 based
on Walk1
3. Create Walk script
Import the image from Scratch library by clicking then select
COSTUMES->ANIMALS. Scroll to select and ; save
them as Walk1 and Walk2.
Add a script to simulate its claws opening and closing:
.
Save this sprite as Crab.
7. Create Mario sprite

127
7. Mario -Walk1
-Walk2
-Jump
Up
-Jump
Down
-Squat
Down
-Walk
-Jump
-Die
-Grow
-Shrink
1. Create custom
costumes
2. Import sounds
3. Create action script
blocks
7.1 Create Mario’s Costumes
Name Look
7 Mario -Walk1
-Walk2
-Jump
Up
-Jump
Down
-Squat
Down
To create Mario’s hat:
=> => => =>
You should have all these pieces before moving on.

128
TO PUT MARIO’S HEAD TOGETHER:
=> => => => =
> => =>
TO PUT MARIO’S UPPER BODY TOGETHER:
=>
Select one arm =>

129
Trim the top =>
=> => =>
=>
TO CREATE MARIO’S LOWER BODY:
=>
Select feet =>

130
Use Shrink Tool to shrink the feet =>
Connect feet to legs =>
Move feet to connect to the butt =>
Erase the line =>
Fill with the same color
TO PUT MARIO’S LOWER BODY WITH THE REST OF HIS BODY
Connect lower body to the upper body =

131
Erase lines =
Fill with color.
TO ROTATE ONE LEG:
Select a leg =
Rotate it =
Reconnect
TO CREATE COSTUME WALKING2:
Select both legs. =

132
Flip it. =
Reconnect.
I’ve also created other costumes: Jumping Up, Jumping Down, and
Squat Down.
Jumping Up
Jumping Down Squat Down
]
The complete list of Mario’s costumes is shown below:

133
7.2 Create Mario’s Scripts
Let’s create Walk script and Jump Script and add more in Lesson 12,
Name Script
8. Mario -Walk
-Jump
CREATE WALK SCRIPT:
Add a script that makes Mario show up at a starting location when the
game starts:
Add a script that makes Mario move right when the right arrow is
clicked:

134
Add a script that makes Mario move left when the left arrow is clicked:
Add a script that makes Mario squat down when the down arrow is
clicked:
CREATE JUMP SCRIPT
Add a script that makes Mario jump up when the up arrow is clicked:

135
LESSON 14: SCROLLING PLATFORM GAME – GAME
RULES
In this lesson, I will show you how to create additional sprites and
scripts to apply the game rules. We will add scripts based on Sprite
Interaction Table. Moreover, we will create random motion scripts for
Mario’s enemies.
1. Create Scripts based on Sprite Interaction Rules
1.1 Rule: How Mario can Score
The rule for Mario to score is as followed:
If Mario hand hits Brick, then Brick would crack. When the Brick
cracks, Coin would start spinning above it. When Coin disappears,
Mario gets one point.
The Sprite Interaction Table below lists all relevant interactions for
this rule.
Sprite1 Sprite2 Interaction Rule
Mario Brick
If Mario hand hits Brick,
then Brick would crack.
Coin Mario
Each time a coin appears,
Mario scores 1 point.
Brick Coin
When Brick cracks, Coin
would show spinning
above Brick

136
You may have noticed that the JUMPING UP costume has a bit of RED
on the fist. It’s not for decoration. The RED bit is added so that the
Brick sprite can know when Mario’s fist has hit it. I call this color (RED
in this case) a sensitive color for the Brick, and the Brick is a
color-sensitive sprite of the RED color. A sensitive color of a
color-sensitive sprite is a color which such a sprite is sensitive to and
responds to when touched. A good sensitive color for a color-sensitive
sprite is a color that is not yet used by any sprite in the project. In the
case of Brick, which contains burgundy and black, it can have all other
colors as sensitive colors. I just picked RED. You can certainly use
BLUE.
The Brick has
burgundy and black.
I picked RED to be
one sensitive color.
You can certainly use
BLUE.
For Brick Sprite:
To simulate Brick cracking when
hit by Mario, add the script as
shown at right to Brick so that it
would show when game starts
and would cracked when touched
by RED, one of Brick’s sensitive
color. Also, the Brick will send out
a message, coin_show, so that
Coin knows when to appear.
NOTE: To copy the color of the RED from Mario’s fist, first select
Mario’s JUMPING UP costume so Mario shows up on Stage in JUMPING

137
UP costume.
Select Brick’s script panel and drag out a “touching color … “ block.
Click the color box (arrow cursor would turn into an eyedropper) and
move the eyedropper
Move the eyedropper to the Stage to copy the RED on Mario’s fist. The
“touching color …” block would change to reflect the color just copied.
For Coin Sprite:
Create a for-this-sprite-only
variable called coins_left and set
it to 1 when game starts. Hide
Coin when game starts and check
if coins_left is greater than 0
when it receives a coin_show
message. If YES, then show Coin,
spin it (simulated by changing
costumes), hide it, send out a
coin_collected message,
decrease coins_left by 1, and
finally stop script. If NO
(points_left is less or equal to 0),
then just do nothing.

138
For Mario Sprite:
Add the script shown at right to
Mario’s script so that the score
would go up one when he collects
a coin (when received a
coin_collected message).
1.2 Rule: If Mario is attached or touched by a Bat or a Crab, he
would die.
The Sprite Interaction Table below lists all relevant interactions for
this rule.
Sprite1 Sprite2 Interaction Rule
Mario Crab
If Mario touches Crab, he
would die.
Mario Bat
If Mario touches Bat, he
would die.
First add a new costume call Dead.
For Mario Sprite:
Create a variable called game_on
and set it to 1 when game starts

139
Add the script shown at
right to Mario so that he
would die when touched by
a Crab or a Bat. To die,
Mario switches costume to
DEAD, sets game_on to 0,
and then stop all scripts.
Modify the script to move right so
that Mario responds to right
arrow key click only when
game_on variable is 1.
Modify the script to move left so
that Mario responds to left arrow
key click only when game_on
variable is 1.
Modify the script to jump so that
Mario responds to up arrow key
click only when game_on
variable is 1.

140
Modify the script to squat so that
Mario responds to down arrow
key click only when game_on
variable is 1.
2. Create Motion Scripts for Mario’s Enemies
In this section, we will add script to Mario’s enemies (Crab and Bat for
now). We want these enemies to move randomly. To do so, we will be
using the “pick random X to Y” from Math Tool Kit.
2.1 Rule: Crab Randomly Crawls to Left and Right
Since a real Crab can only move side to side, but not up and down, we
will make Crab move toward Mario, but with some randomness in its
direction when deciding to turn left or right.
To do so, we need a way to pick left or right randomly. Create a
variable named dir and set it to the value of .
The block returns a random value between 0 and 1.
And the block returns the round number of
this random value. If the random number is smaller than 0.5, then the
result would be 0, but if the random number returned is greater or
equal to 0.5, then the result would be 1. This way, there is 50%
chance the result would be 1, and 50% chance the result would be 0.
To use the result to determine the direction, use the “if … else …”
block.

141
Remember that in Scratch, direction 90 is right -90 is left.
Let’s put Crab’s script together so that it moves randomly to left and to
right, and that it bounces if it hit the edge.
2.2 Rule: Bat Flies Toward Mario, with Some Randomness

142
Unlike Crab, Bat flies so it should move in all four directions. But
there’s much space on Stage so Bat may never touch Mario if it just
flies randomly. What we want is to have Bat fly toward Mario but
randomly adjusts its direction. To have it move toward Mario, use
“point towards X” block and “move X steps” block.
To keep flying toward Mario when game starts, expand the script to
look like this:
If you try it now, Bat would shoot straight toward Mario and the game
will end before you have time to move Mario! What we need to add is
a bit “wondering” by adding directional randomness. Just like Crab,
Bat should randomly pick a direction to turn, but unlike Crab, Bat
should pick a direction from -90 to 180, the whole range of rotation in
Scratch.
To do so, place this block immediately below “Move towards Mario”:
The updated script would look like this:

143
Don’t forget to add the “if edge, then bounce” block. So the final script
for Fly motion should be:
!!TEST TIME!!
Now we are ready to test! Click Green Flag to start. Crab should crawl
side to side, and Bat should fly in zig-zag motion. Try moving Mario
under Brick and click up arrow key to jump to hit it. Coin should
appear above Brick and disappear shortly after. The score would go up
by 1. Also try move Mario toward Bat or Crab to “commit suicide”;
when Mario touches either Bat or Crab, all should stop.

144
LESSON 15: Scrolling Platform Game – Platforms
If you’ve have played one or more platform games (video games
characterized by jumping to and from suspended platforms), you
should’ve seen scrolling platforms. In this lesson, I will show you how
to add platforms and make them scroll. Let’s do it!
Platform Sprites are usually immobile sprites that look like stage
backgrounds but can interact with other sprites on stage. Moreover,
they often are located at the bottom of the Stage and they could look
like ground, wall, grass field, or brick pavement. Today, I will show you
how to turn our simple Mini Mario game from Lesson 12 to a basic
platform game using Platform Sprites.
Step 1: Create Platform Sprites
To create platform sprites that look like brick pavement, first click the
“Paint new sprite” button to open the costume editor. Then use
square tool in solid mode with pink
color as shown below.

145
Create a wide bar that spans the whole width of the drawing area.
Start from the left end of the drawing
area.
End at the right end of the drawing
area.
Draw a wide bar which is enclosed in the pink wide bar. You can pick
any color.

146
area.
area.
Then use pink hallow box to create grouts.
area.
area.

147
Click OK to save and rename this costume as Level 1. Then click
Level1’s “Copy” button.
Rename the copy to Level 2 and click its “Edit” button.
Draw the outline of an elevated platform.
Then fill this platform with the same pink color.

148
Create a brick in orange.
Then use Stamp Tool to make copy of this brick and stack them as
below. Then click OK to save.
Change the sprite name to “Platform”.

149
Then move Platform to the bottom of the Stage.
With Platform sprite selected, click Scripts Tab, and then select Motion
Tool Kit. Drag out “go to x: 2 y:-164” block to the Scripts panel. Note
that the x and y values of your “go to x: ? y:?” might be a bit different
than 2 and -164. It’s OK – these numbers are filled in for you
automatically by Scratch when you move a sprite on the Stage.
Build a combo block as followed so that Platform sprite shows at the
bottom of the Stage every time the game starts.

150
Step 2: Interact with Platform Sprites
Next, we need to modify Mario’s script so that he would stand on the
platform. We will be using “color X is touching Y” block. We will use
“color brown is touching pink” because Mario’s shoes are brown and
the platform’s top is pink.
Create a combo block that repeatedly moves Mario down (change y by
-4) until Mario’s shoe color is touching the color of the platform’s top.
To copy these two colors, first click the first color box and then click
Mario’s shoes with the eyedropper. Do the same to copy the color
pink.

151
With this combo block, we need to change the combo block that does
the jumping.
This is what we had from Lesson 12 – jumping involves going up
(increase y) as well as going down (decrease y).
But since now we’ve added the combo block that moves Mario down
until his shoes hit the platform, jumping now only needs to involve
going up. Moreover, make Mario jump higher by increate the change
from 30 to 60, so that Mario can jump over Crab.
Also, I modified where Mario shows in the beginning so he will fall
down from the sky, just like the original Mario game.

152
TRY IT! Start the game now and you should see Mario fall down
from above and landed right on top of the Platform sprite. Try jump
around and see Mario fall back down on the Platform.
Step 3: Add a Level to the Game
Next, let’s kick it up a notch by adding a level to the game to make it
a two-level game. To do so, let’s add a special coin such that if Mario
collects it then he would be moved to the next level. Right click Coin
sprite and select duplicate.
Rename the duplicate sprite to CoinToPass. Delete all script in
CoinToPass and add the following script block so that when CoinToPass
sprite is touched by Mario, it would send out a broadcast message
called “next_level”.
The Platform sprite would catch the “next_level” message and change
its costume to “Level2”.

153
The Platform sprite’s scripts now look like this:
TRY IT! Now you can test your jumping skill. Note that you can do
multiple jumps (by hitting UP multiple times) so it looks like Mario is
flying or sky-walking. I just thought that it’s nice to let him have a bit
more power.
Step 4: Bullets
If you are like me, then you probably find this game pretty tough. If
not, then you can skip this step. I guess you are pretty good at
sky-walking…. But for me, my Mario needs a bit help to fend off his
enemies. Let’s give him bullets, shall we?
Click to create a new sprite and create a simple bullet trace that
looks like this:

154
Save this sprite as “Bullet”.
To tell bullet which direction to fly to, create a variable called
“facing_right” and set it to true (set to 1) when Mario turns right and
to false (set to 0) when he turns left. The updated relevant scripts look
like this:
Besides script, let’s change the costume “WALK2” to face left. Click
costume WALK2’s edit button. Then click the horizontal flip button to
flip the image.

155
Now let’s update Bullet’s script so that, when space key is pressed, it
flies out from Mario to the right if Mario faces right and to the left if he
faces left. Also, Bullet will keep flying until it touches the edge of the
Stage, then it would hide.
Finally, let’s add a combo block to Bat and Crab’s scripts so that they
disappear when hit by Bullet.

156
TRY IT! Try attacking by hitting the space key. Liberating eh?
Step 5: Rewards
Finally, let’s reward Mr. Mario for his hard work. The first prize is Fruit
Platter. Update its scripts so that it shows on the top of the Stage
when the first Level is cleared.
Update Princess’ scripts so that she shows up only after Mario has
scored two points. When Mario finally met or “touched” Princess, she
would have hearts all above her head and then the game would end.

157
TRY IT! Try scoring two points by getting all coins, then move close to
Princess to see her fall in love with Mario.
THIS CONCLUDES LESSON 13. IT’S TIME FOR MY BOBA TEA BREAK.

158
Lesson 16: Mini Mario Game Part 5 – Scrolling Intro
The trick to have the scrolling platform effect in a Scratch game is to
add multiple Platform Sprites. A Platform Sprite is an immobile sprite
that looks like a stage background but it can interact with other sprites
on stage.
Think of the Stage as a viewable area of an infinitely long strip. This
viewable area starts from x = -240 and ends at x = -240. We will just
consider the one-dimensional reference frame and ignore the y-axis
for now. The reference frame does not change when sprites move.
The viewable area also does not change when sprites move.

159
To illustrate how scrolling works, let’s use these two platform sprites
that each spans 480.
Platform 0:
Platform 1:
Line them up side by side, starting from the left edge of the Stage (the
viewable area):
,
The Whole Strip What’s Shown on
Stage
Before Scrolling
Scroll to the right by 120
Scroll to the right by 480

160
When the game first starts, the red platform’s center is located at x =
0 and takes up space from x = -240 to x = 240; the green platform’s
center is located at x = 480 and takes up space from x = 240 to x =
720. Both have width of 480.
240 – (-240) = 480 width of the red platform sprite
720 – 240 = 480 width of the green platform sprite
The orange box represents the Stage and only area inside the orange
box is viewable. The Stage is 480 in width (x-axis) and 360 in height
(y-axis). Only the x-axis is shown because we will only be scrolling
left or right.
If we let STAGE_WIDTH be a global variable for the width of the Stage,
and PLATFORM_INDEX be a local variable of each platform sprite,

161
which specifies where the platform is on the strip, then we can
represent the starting positions for both sprites as PLATFORM_INDEX
* STAGE_WIDTH ( * is the multiplication sign).
STARTING_POSITIONRED = PLATFORM_INDEX * STAGE_WIDTH =
0 * 480 = 0
STARTING_POSITIONGREEN = PLATFORM_INDEX * STAGE_WIDTH
= 1 * 480 = 480
Imaging you are driving a car and are moving forward (scrolling to the
right). Though the car is moving forward, but looking from inside the
car, the landscape is moving backward relative to you.
In the same way, to move forward from the user’s perspective, we
move the platforms backward. Therefore, if the user scrolls to the
right by 120, then the positions for both platform sprites should be:
POSITIONRED = STARTING_POSITIONRED + SCROLL_XPLATFORM = 0 +
(-120) = -120
POSITIONGREEN = STARTING_POSITIONGREEN + SCROLL_ XPLATFORM =
480 + (-120) = 360

162
Moreover, if the user scrolls to the right by 480, then the positions for
both platform sprites should be:
POSITIONRED = STARTING_POSITIONRED + SCROLL_XPLATFORM = 0 +
(-480) = -480
POSITIONGREEN = STARTING_POSITIONGREEN + SCROLL_ XPLATFORM =
480 + (-480) = 0

163
We also need to hide a platform sprite if its center is larger than 480
or smaller than -480.
When the game first starts, the green platform is hidden because its
center is at 480.

164
After scrolling to the right by 480, the red platform is hidden because
its center is now at -480.
Now we are ready to put the scripts together. Below is the script for
the red platform or Platform0.

165
The green platform or Platform1 has exactly the same script as the
red platform or Platform0, except that its my_platform is 1 instead of
0.

166

167
Lesson 17: Platform Game Wrapup
In this lesson, we will wrap up the Mini Mario game by making it scroll,
among other things. Also, please go to http://shallwelearn.com to
download MiniMarioLesson13.sb from Scratch Programming Lesson 13.
This is the snapshot of the sprite list when the project is opened.
Step 1: Create a Variable to Represent Scrolling Amount
Create a global variable called scroll to represent the amount of
scrolling. When Mario moves to the right, the scrolling amount
decreases, and when it moves to the left, the scrolling amount
increases. If you are unfamiliar of how scrolling works in Scratch or in
general, please refer to Shall We Learn Scratch Programming Lesson 14.

168
Delete “change x by …” and replace with “chang scollX by -2.5”.
Step 2: Make Platforms Scroll
I am going to split Platform sprite into two sprites: Platform0 and
Platform1.
I will line these two platform sprites side-by-side. When the game starts,
Platform0 is located at x = 0 or 0 * the stage width (=480). Platform1 is at
x = 480 or 1 * the stage width.

169
Rename Platform to Platform0. Delete all scripts from Platform0 and add
the following scripts, which are very similar to what we built in Lesson 14,
except that I added a global variable call platform0_global_x.

170
Then make a copy of Platform0 and name the copy as Platform1.
Delete costume Level2 from Platform0 and rename costume Level1 to
Level and delete costume Level1 from Platform1 and rename costume
Level2 to Level.
Then, as shown below, for Platform1, set my_platform to 1 when game
starts. Then create a new global variable called platform1_global_x
and place it in the place of platform0_global_x.

171
TEST TIME: Now test the game. You can scroll but there is an
obvious problem. Both the brick and two coins keep following Mario so
Mario could never get to them. We will fix it.
Step 3: Modify the Brick and CoinToPass to Stop Them from Following Mario
To keep the brick and coins from following Mario, we need to make
them scroll, just like the platform sprites. We will copy the scripts
pertaining to scrolling from platform sprites to both Brick and Coin sprite.
But we need to make two changes. The first is to add a local variable
call offset_x; this variable stores the distance from the left boundary of
the platform to the sprite.
The location of the dot sprite will be
STARTING_POSITIONDOT = PLATFORM_INDEX * STAGE_WIDTH +
OFFSET_X
POSITIONDOT = STARTING_POSITIONDOT + SCROLL_XPLATFORM

172
The second change is to change the show/hide boundary from
STAGE_WIDTH (=480) to STAGE_WIDTH/2 (=240). The graph below shows
the snapshot of the stage before and after the scrolling to the right by
270 (scrollX = -270).
STARTING_POSITIONDOT = STARTING_ POSITIONRED_PLATFORM + OFFSET_X
= PLATFORM_INDEX * STAGE_WIDTH + OFFSET_X
= 0 * 480 + 30 = 30
POSITIONDOT = POSITIONRED_PLATFORM + OFFSET_X
= STARTING_POSITIONRED + SCROLL_XPLATFORM + OFFSET_X
= 0 * 480 + (-270) + 30 = 30
The snapshot below shows Brick’s script blocks relevant to scrolling.

173
Next, we will change CoinToPass sprite. First remove all motion-related
scripts and copy all scrolling related scripts from Brick to CoinToPass.

174
Step 4: Upgrade the Bullet and Turn Brick to a Mini Platform
If you would like, you can upgrade the Bullet so that you can shoot from

175
all four directions. Below is the updated script for the Bullet.
To turn the Brick into a mini platform, just add a top pink layer (the same
pink used to create the top layer of the Platform0 and Platform1 sprites).

176
Then Mario can stand on the Brick as well.
This concludes Lesson 15, the last lesson of Mini Mario Game series. I
hope you have enjoyed this series and leave with enough know-how to
make your own platform games!

177
CONCLUSION
This concludes Shall We Learn Beginning Scratch Programming. I
hope you have enjoyed reading this book. If you would like to learn
more, please read Shall We Learn Intermediate Scratch
Programming.
For project downloads and more scratch or other programming
lessons, go to http://shallwelearn.com

Learn scratch-programming-e book

More Related Content

Viewers also liked (11)

Similar to Learn scratch-programming-e book (20)

Recently uploaded (20)

Learn scratch-programming-e book