Low Cost HD Surveillance Camera using Raspberry PI
14 likes•8,785 views
This document describes how to build an HD surveillance camera system using a Raspberry Pi. The system uses a Raspberry Pi, camera module, WiFi adapter, housing, power supply, SD card, and motion detection software. The Raspberry Pi runs Raspbian OS and uses the camera module, motion software, and WiFi to detect and record motion events to the SD card. The live video stream and recorded videos can be accessed from any browser using the Raspberry Pi's static IP address.
Low Cost HD Surveillance Camera using Raspberry PI
- 1. “HD Surveillance Camera using Raspberry PI”
- 2. Introduction HD Surveillance Camera using Raspberry PI is a camera which records HD videos when some motion is detected in the monitored area. • See live stream in any web browse from anywhere.
- 3. Introduction Live Picture or video can be viewed from anywhere from any web browser even from our mobile browsers. • Record any motion into video file.
- 4. Components Used Wi-Fi USB Adaptor Housing for the Camera Raspberry PI Camera Module SD Card Power Supply Raspberri PI
- 5. Raspberry PI O It is a low cost, credit-card sized computer that plugs into a computer monitor or a TV.
- 6. Raspberry PI Raspberry PI Model B Model A
- 8. Raspberry PI Camera Module O 5 MP Camera exclusively made for Raspberry PI O Can take 1080p High Definition Videos O Small in size and can be connected directly to the Raspberry PI Board. O 1080p, 780p and also Still pictures.
- 9. Housing For Camera O Whole System will be placed inside the Housing. O Care has to be taken so that whole thing has to be fit inside the housing
- 10. Power Supply O Board will not come with any power supply O 5V USB Power Supply with micro-USB plug. O Must supply at least 1A of power.
- 11. SD Card O Secure Digital Card is a non volatile memory card O Used in Mobiles, Cameras etc. O SDHC (Secure Digital High Capacity ) Card can also be used.
- 12. SD Card O Raspberry PI has no storage on board. O SD Card is required to run the OS O Class 10 is preferred as speed is very important
- 13. Network Adapter O Need to have some network connection. O We don’t use LAN just to avoid wired connection. O Wi-Fi USB Adapter that supports speed of 150Mbps O Edimax Wi-Fi USB Adapter
- 14. SoftWares Required O 1. Raspbian OS O 2. PuTTY O 3. Motion Software
- 15. Operating System O Raspberry PI requires LINUX Kernel based OS O “Raspbian” – Free OS for Raspberry PI Hardware. O Optimized for best performance on Raspberry PI.
- 16. PuTTY O Open-source terminal emulator. O Serial console and network file transfer application . O Supports several network protocols, including SCP , Telnet etc. O Can be connected to a Serial Port.
- 17. Motion Software O Program that monitors the video signal from cameras. O Used to detect motion. O Open Software.
- 19. STEPS O "Rasbian" Operating System is loaded into the "Raspberry Pi" SoC and Raspberry Pi 'Camera Module' is interfaced to it O Motion Software is installed in Raspberry PI using Command Line. O Wi-Fi adapter is interfaced with Raspberry PI board. O Internet Access is given to Raspberry PI Board
- 20. Contd.. O Need a software to connect to LINUX Console in Raspberry PI. OWe install PuTTY in our windows computer to fulfill the need. O Further share a folder on the server to store the recorded video. O Using a “Static IP “ the live video can be streamed on any browser across the world.
- 21. Conclusion O HD Surveillance Camera is set up in the area which we want to monitor, video containing detected motion is stored in a server and live video can be accessed from anywhere just by entering the static IP assigned to the System in a web browser.