Mikrotik Hotspot User Manager
7 likes10,437 views
This document provides instructions for setting up a Mikrotik hotspot with user management. It discusses configuring bridge and wireless interfaces, setting up a hotspot server and profile, installing the User Manager package to connect to RouterOS for user authentication, and creating bandwidth profiles, user profiles, and individual users. The network topology bridges the Ethernet and wireless interfaces for hotspot access. User Manager acts as a RADIUS server to limit bandwidth, time usage, and log users accessing the hotspot network.
Mikrotik Hotspot User Manager
- 1. Mikrotik Hotspot with User Manager Narun Koy, eintellego Networks E-mail: [email protected] Position: Network Operation Engineer
- 2. What is Hotspot? Hotspot is a way to authorize users to access some network resources or internet. To log in, users may use almost any web browser like Internet Explorer, Firefox, Safari, Opera… etc. What is User Manager? User Manager is a software use to create User, Limit bandwidth for user, Limit period usage, Log user… etc. It is a separate package for RouterOS. User Manager is a RADIUS server application. Who should use Hotspot? Internet Coffee, Restaurant, Super Market, School, Hotel, Hospital, Advertisement purpose… etc.
- 3. Network Topology Eth2 interface has been bridge with build-in wireless card for Hotspot service Anonymous users Hotspot user name & password ISP Media Converter Mikrotik RB 2011
- 4. Objective I. Interface preparation for Hotspot service 1. Add eth2 and wireless card to bridge interface 2. Configure IP address for bridge interface 3. Configure wireless with blank password II. Setup hotspot server and server profile 1. Setup Hotspot Server 2. Setup Hotspot Server Profile III. Install User Manager and connect with RouterOS 1. Download and install User Manager 2. Connect Radius with User Manager IV. Create Profile and Users 1. Create Bandwidth Profile 2. Create User Profile 3. Create Users 4. Login / Logout Page
- 5. I.1. Configure Bridge Interface 1 2 3 4 5 6 1 2 3 4 5 6
- 6. I.2. Configure IP for Bridge Interface
- 7. I.3. Configure wireless with blank password 1 2 3 4 5 6
- 8. II.1. Setup Hotspot Server 1 2 3 4 5 6 7 8 9
- 9. II.1. Setup Hotspot Server (Cont…) Hotspot Server Result
- 10. II.2. Setup Hotspot Server Profile 1 2 3 4 5
- 11. II.2. Setup Hotspot Server Profile (Cont…) 6 7 8
- 12. III.1. Download and Install User Manager 1 2
- 13. III.1. Download and Install User Manager (cont...) 1 2 => Drop Package => Reboot Router Board 3 Verify package System => Package
- 14. III.2. Connect Radius with User Manager 1 2 3 4 Authenticate with User Manager
- 15. III.2. Connect Radius with User Manager (cont…) 1 2 Note: You can’t access to this page if your PC is a hotspot client.
- 16. III.2. Connect Radius with User Manager (cont…) 1 1 Authenticate with Radius Server 2
- 17. IV.1. Create Bandwidth Profile 1 2 3 4 5
- 18. IV.2. Create User Profile 1 2 3 4 5 7 6
- 20. IV.4. Login / Logout Page Note: This page will pop up automatically when user connect the wireless hotspot.