mop-baseband-integration-xl-project-pa-1docxdocx-pr_299cefaa0fd3e32dd950c721867de88c.pdf

mop-baseband-integration-xl-project-pa-1docxdocx-pr_299cefaa0fd3e32dd950c721867de88c.pdf

• 1.
  Ericsson Internal INSTRUCTION 1(22) Prepared (Subject resp) No. ESETARI Arif Setiawan Approved (Document resp) Checked Date Rev Reference EYULTEN Yulpien Teng 2017-04-17 PA1 MOP BASEBAND INTEGRATION XL PROJECT
• 2.
  Ericsson Internal INSTRUCTION 2(22) Prepared (Subject resp) No. ESETARI Arif Setiawan Approved (Document resp) Checked Date Rev Reference EYULTEN Yulpien Teng 2017-04-17 PA1 Contents 1. Scope 1 2. Revision history 1 3. Software features and tools 2 4. Configuration & procedure 3 5. Procedure 4 6. Concluding routines 5 7. References 6
• 3.
  Ericsson Internal INSTRUCTION 3(22) Prepared (Subject resp) No. ESETARI Arif Setiawan Approved (Document resp) Checked Date Rev Reference EYULTEN Yulpien Teng 2017-04-17 PA1 1 Scope This document describes method of procedure (MoP) how to commissioning & integration baseband 521x to OSS RC, RNC, BSC, 2 Revision History Revision Comment Author Date PA 1 Initial draft ESETARI 2017/4/17 3 Prerequisites 3.1 Tools 1. Web Browser (recommended use IE) 2. Latest Moshell or minimum moshell 17.0c 3. RJ-45 LAN Cable straigh 4. SFTP aplication 3.2 Software 17A SW : CXP9024418/5_R18BJ 3.3 Hardware o RBS Type: RBS 6000 Family (RBS 6601,6320,6120) o Baseband: o BB5216 o BB5212 o BSC HC/ EVO Controller o TCU/SIU o RU/RUS/RRUS/R2219/R2217
• 4.
  Ericsson Internal INSTRUCTION 4(22) Prepared (Subject resp) No. ESETARI Arif Setiawan Approved (Document resp) Checked Date Rev Reference EYULTEN Yulpien Teng 2017-04-17 PA1 4 Configuration 4.1 Type of Configuration existing site (mixedmode) 4.1.1 LTE 1800 + U900 (BB 5216) mixedmode radio with existing G900 (DUG) and DCS1800 (DUG)
• 5.
  Ericsson Internal INSTRUCTION 5(22) Prepared (Subject resp) No. ESETARI Arif Setiawan Approved (Document resp) Checked Date Rev Reference EYULTEN Yulpien Teng 2017-04-17 PA1 4.1.2 W2100 + U900 (BB5216) mixedmode radio with existing G900 (DUG) 4.1.3 LTE 1800 (BB 5212) mixed mode with existing G1800 (DUG)
• 6.
  Ericsson Internal INSTRUCTION 6(22) Prepared (Subject resp) No. ESETARI Arif Setiawan Approved (Document resp) Checked Date Rev Reference EYULTEN Yulpien Teng 2017-04-17 PA1 4.1.4 U900 (BB 5216) mixed mode with GSM 900 (DUG) 4.1.5 U2100 (BB 5216)
• 7.
  Ericsson Internal INSTRUCTION 7(22) Prepared (Subject resp) No. ESETARI Arif Setiawan Approved (Document resp) Checked Date Rev Reference EYULTEN Yulpien Teng 2017-04-17 PA1 4.1.6 U2100 + LTE 1800 (BB 5216) mixed mode with G1800 (DUG)
• 8.
  Ericsson Internal INSTRUCTION 8(22) Prepared (Subject resp) No. ESETARI Arif Setiawan Approved (Document resp) Checked Date Rev Reference EYULTEN Yulpien Teng 2017-04-17 PA1 4.2 Type of Configuration new site 4.2.1 W2100 + U900 (BB 5216) 4.2.2 W2100 + U900 + LTE 1800 (BB 5216) cascade RU solution
• 9.
  Ericsson Internal INSTRUCTION 9(22) Prepared (Subject resp) No. ESETARI Arif Setiawan Approved (Document resp) Checked Date Rev Reference EYULTEN Yulpien Teng 2017-04-17 PA1 4.2.3 W2100 (BB 5216) 4.2.4 LTE 1800 + W2100 (BB 5216)
• 10.
  Ericsson Internal INSTRUCTION 10(22) Prepared (Subject resp) No. ESETARI Arif Setiawan Approved (Document resp) Checked Date Rev Reference EYULTEN Yulpien Teng 2017-04-17 PA1 4.3 Baseband combination to other RU config Baseband_RU_com bination.pptx 5 New NE Procedure 5.1 Flow Chart 5.2 Preparation This phase describes the activities that should be performed before the execution of the RBS.. 5.2.1 Hardware Installation Make sure all hardware installed properly following standard installation on the MOP. 5.2.2 ATND CDD CDR IP (ATND) & Radio (CDD) configuration data must be provided
• 11.
  Ericsson Internal INSTRUCTION 11(22) Prepared (Subject resp) No. ESETARI Arif Setiawan Approved (Document resp) Checked Date Rev Reference EYULTEN Yulpien Teng 2017-04-17 PA1 Example : ATND Jomin Barat scenario 3.1 PA2.xlsx ATND Jomin Barat scenario 3.2 PA2.xlsx 5.2.3 Prepare integration script To generate the integration scripts is used the Internal tool (Ericsson – PCI tool). The scripts will be provided by GSC Team, generated via PCI Tools. Download the scripts from PCI server. The scripts must be contained of below files.  RBS Summary File  Site Basic File  Site Equipment File  Transport Network File  Radio Network File Example configuration script : 5.3 Commissioning (onsite) 5.3.1 Powering up RBS If the RBS is not already switched on, do the following: 1. Make sure the power supply is available, tested, and approved for supplying the RBS with power. 2. Switch on the power supply to the RBS 5.3.2 Check RBS status To verify that the RBS is ready for integration, do the following: On digital units and radio units, check that the green power indicators are on 5.3.3 Tools preparation& baseband commissioning Do baseband commissioning using smart laptop or manual Workshop Baseband 5212.pptx Method of Procedure Baseband 5216 Integration using Smart Laptop.docx 5.4 Integration Call GSC /TAC to configure in BSC/RNC/OSS side 5.4.1 RNC Integration RNC integration and scripting are same as G1 node (DUW) a. Create utrancell b. Create Iublink
• 12.
  Ericsson Internal INSTRUCTION 12(22) Prepared (Subject resp) No. ESETARI Arif Setiawan Approved (Document resp) Checked Date Rev Reference EYULTEN Yulpien Teng 2017-04-17 PA1 c. Create relation 3453817G_3G_TESBED_KARAWANG_RNBKS07.rar 00_Iublink.rar 5.4.2 OSS Integration MOP BASEBAND INTEGRATION-OSS-RC XL PROJECT.docx 5.4.3 License Key File Installation 5.4.3.1 Install LKF File Using OSS-RC SHM GUI Just for this phase 1 procedure, this is a post-integration activity. As the integration unlock only is valid for a limit number of days, a proper set of licenses, License Key File (LKF) need to be ordered and installed for the node. This step will also confirm that proper license considerations made were correct. The maintained performance and no resource alarms should confirm the success of this step. Prerequisite for the following steps is that the ordered LKF(s) has been received and has been stored by the user at defined directory location on OSS-RC user account file system. Note that the stored license file is a zip file that contain at least one License Data File (LDF) and one LKF to be imported. For more details, see reference Error: Reference source not found. 1. Import License Key File Open OSS Explorer (Launch -> Application -> Ericsson -> ), Start SHM GUI (Tools -> Hardware and Software Inventory –> Software Hardware Management -> ). Select the License tab on top of SHM GUI. Click on the Import button at right of the License tab view. In the “Import new License Key File” dialog box, click Browse. Select the LKF zip file from chosen location. Enter a short description and click Import. The new license key files will be listed under License tab view when imported to OSS-RC server SMRS.
• 13.
  Ericsson Internal INSTRUCTION 13(22) Prepared (Subject resp) No. ESETARI Arif Setiawan Approved (Document resp) Checked Date Rev Reference EYULTEN Yulpien Teng 2017-04-17 PA1 Note that when the fingerprint present in LKF zip file matches with the fingerprint of any added node in the OSS-RC server, then ME name will be updated under Managed Element column in License tab GUI accordingly. Otherwise empty value will be displayed under that column with imported license key file details
• 14.
  Ericsson Internal INSTRUCTION 14(22) Prepared (Subject resp) No. ESETARI Arif Setiawan Approved (Document resp) Checked Date Rev Reference EYULTEN Yulpien Teng 2017-04-17 PA1 2. Install Imported License Key File on the Node Select the License tab on top of SHM GUI, if not already selected. Select the LKF row under License tab view with node name present on ”Managed Element” column or search for the node in left side panel and select the node name in left side panel result list. Click on the Install button at right of the License tab view. Note that Install button is enabled when node name for imported LKF is selected. In the “Confirmation” dialog box, click Yes to proceed if status is as expected (no errors shown). In the next “Scheduler” dialog box, click “Start Immediately” and “Start Install”. This schedules a “Install License” job. Select the Job tab on top of SHM GUI to check the progress of the job. Once the install is successful on the node SHM will update the “Current License” column as TRUE under License tab view. Check status on the node after installed LKF file Launch EMCLI for selected node from OSS Common Explorer or start AMOS from opened OSS terminal window. Perform the following first EMCLI/AMOS commands. > lt all > alt At this stage there should not be any licensing related alarms. Verify the RAN traffic status by the commands according to chapter 5.8.1
• 15.
  Ericsson Internal INSTRUCTION 15(22) Prepared (Subject resp) No. ESETARI Arif Setiawan Approved (Document resp) Checked Date Rev Reference EYULTEN Yulpien Teng 2017-04-17 PA1 5.4.4 Setting primary secondary Always set baseband to be primary node Port A Used by Port B Used by A1 SCU (EC A) B1 DU-1/ Baseband-1 A2 PDU-1 B2 PDU-2 A3 PSU-1/DU-6(1) /Baseband T503 B3 PSU-2 A4 PSU-3 B4 PSU-4 A5 DU-2/ Baseband-2/ Baseband T503 B5 BFU A6 DU-3/ Baseband-3/ Baseband T503 B6 PSU-5 A7 DU-4/ Baseband-4/ Baseband T503 B7 PDU-3 A8 PDU-4 B8 CLU
• 16.
  Ericsson Internal INSTRUCTION 16(22) Prepared (Subject resp) No. ESETARI Arif Setiawan Approved (Document resp) Checked Date Rev Reference EYULTEN Yulpien Teng 2017-04-17 PA1 1. Set support system control to be true 2. Define Baseband ecport Command : set Equipment=1,FieldReplaceableUnit=1,EcPort=1 hubPosition B1 3. Define external node & Ecport
• 17.
  Ericsson Internal INSTRUCTION 17(22) Prepared (Subject resp) No. ESETARI Arif Setiawan Approved (Document resp) Checked Date Rev Reference EYULTEN Yulpien Teng 2017-04-17 PA1 4. Define ecport each of externalnode 5.4.5 Setting eksternal alarm 5.4.6 Define Node Group Sync (sync between DU-Baseband) 1. Define NGS in baseband
• 18.
  Ericsson Internal INSTRUCTION 18(22) Prepared (Subject resp) No. ESETARI Arif Setiawan Approved (Document resp) Checked Date Rev Reference EYULTEN Yulpien Teng 2017-04-17 PA1 NodeGroupSyncMe mber_LTE_BB.mos 2. Define NGS in DUG idb_OL1800.dbb idb_UL900.dbb 5.4.7 Define RET baseband (if needed) Before Create RET, Must be Create RfPort=R at RRU TSR_Create_RET_BA SEBAND.mos 5.5 Troubleshooting  Transport Check Cek default gateway for each inteface baik OAM and/or traffic hget Dst=1,NextHop=1 address ========================================================================== MO address ========================================================================== Router=vr_OAM,RouteTableIPv4Static=1,Dst=1,NextHop=1 XX.XX.XX.XX Router=vr_Traffic3G,RouteTableIPv4Static=1,Dst=1,NextHop=1 YY.YY.YY.YY ========================================================================== Total: 2 MOs Test ping OAM mcc Router=vr_OAM ping XX.XX.XX.XX --count 5 Test Ping Traffic mcc Router=vr_Traffic3G ping YY.YY.YY.YY --count 5
• 19.
  Ericsson Internal INSTRUCTION 19(22) Prepared (Subject resp) No. ESETARI Arif Setiawan Approved (Document resp) Checked Date Rev Reference EYULTEN Yulpien Teng 2017-04-17 PA1  Hardware and connection cable check  st FieldReplaceableUnit=  Verifikasi Sector dan cell  St SectorEquipmentFunction=  lst LocalCell 5.6 Setting basic parameter Run script basic parameter either on site or remotely run /home/test123/Baseband/Basic_Optim.mos 5.7 Verification & Functionality test 5.7.1 Verification service and call test This step should be executed by OMC engineer, to verify that the integration was performed with successful. So the OMC engineer must to check if exist MOs DISABLED or LOCKED and Alarms after start the integration l+ confb+ gs+ cvls st cell st sector st ru st router st field lst. Dis st tma (only if they are present) st ret (only if they are present) st Synchronization alt hget fieldrep state|indi hget fieldrep product hget hwitem= product|serial /lrat/ue print -bearer gs- confb- l- and do functionality test(test call) using SRS tool
• 20.
  Ericsson Internal INSTRUCTION 20(22) Prepared (Subject resp) No. ESETARI Arif Setiawan Approved (Document resp) Checked Date Rev Reference EYULTEN Yulpien Teng 2017-04-17 PA1 5.7.2 Primary and secondary status 5.7.3 External Alarm testing Please doing external alarm testing with rectifier 5.7.4 NGS (node group sync) status
• 21.
  Ericsson Internal INSTRUCTION 21(22) Prepared (Subject resp) No. ESETARI Arif Setiawan Approved (Document resp) Checked Date Rev Reference EYULTEN Yulpien Teng 2017-04-17 PA1 5.7.5 RET status 5.7.6 Hardware and connection cable check  st FieldReplaceableUnit= 5.7.7 Verification Sector and cell  St SectorEquipmentFunction=  lst LocalCell 6 Concluding routines Before leaving the sites, ensure that the following action have been performs 1. Make sure no alarm appears at the RBS. 2. Save Log (K-get) 3. Tidy the site and leave it in the same condition as you found it. 4. Lock all doors to the site. 5. Report/contact Ericsson supervisor. 6. Report/contact Customer PIC. 7 References & Appendix 1. Upgrade Software Baseband Upgrade Baseband 52xx via SHM OSS-RC_PA2.docx Software Upgrade BB 52xx via Moshell or AMOS OSS-RC.docx
• 22.
  Ericsson Internal INSTRUCTION 22(22) Prepared (Subject resp) No. ESETARI Arif Setiawan Approved (Document resp) Checked Date Rev Reference EYULTEN Yulpien Teng 2017-04-17 PA1