NodeB Application Part
49 likes•13,844 views
The document provides an overview of NBAP (Node B Application Part) procedures. It discusses: 1. The Iub interface between RNC and Node B and how NBAP is used for signaling. 2. The main functions of NBAP including cell configuration management, transport channel management, and radio link management. 3. The different types of NBAP procedures including common procedures for tasks like cell setup/deletion and dedicated procedures for radio link management. 4. Key elements of NBAP communication like messages, information elements, and error handling.
![NBAP Common ProceduresNBAP Common Procedures
Common Transport Channel SetupCommon Transport Channel Setup
Initiating Message: COMMON TRANSPORT CHANNEL SETUP
RQUEST
CRNC establishes the necessary resources in Node B regarding
– S-CCPCH, FACH, PCH, PICH, PRACH, RACH, AICH[FDD]
One request message can configure only one of the
combinations
– One S-CCPCH, FACHs, PCH and PICH related to that S-CCPCH
– One PRACH, one RACH and one AICH [FDD] related to that PRACH
36
CRNC Node B
COMMON TRANSPORT CHANNEL SETUP
REQUEST
COMMON TRANSPORT CHANNEL SETUP
RESPONSE
March 13, 2013 Tusharadri Sarkar](https://image.slidesharecdn.com/nodebapplicationpart-130704124657-phpapp02/85/NodeB-Application-Part-36-320.jpg)
![NBAP Common ProceduresNBAP Common Procedures
Common Transport Channel DeletionCommon Transport Channel Deletion
Initiating Message: COMMON TRANSPORT CHANNEL
DELETION RQUEST
Which one to delete? IE: COMMON PHYSICAL CHANNEL ID
If Secondary CCPCH, Node B deletes
The S-CCPCH, all FACHs, the PCH supported by that FACH and the
PICH supported by that PCH
If PRACH, Node B deletes
The PRACH, the RACH and the AICH [FDD] supported by that
PRACH
44
CRNC Node B
COMMON TRANSPORT CHANNEL
DELETION REQUEST
COMMON TRANSPORT CHANNEL
DELETION RESPONSE
March 13, 2013 Tusharadri Sarkar](https://image.slidesharecdn.com/nodebapplicationpart-130704124657-phpapp02/85/NodeB-Application-Part-44-320.jpg)
![NBAP Dedicated ProceduresNBAP Dedicated Procedures
Downlink Power Control [FDD]Downlink Power Control [FDD]
Message: DL POWER CONTROL REQUEST
CRNC wants to control DL transmission power of one or more
RLs for any existing Node B Communication Context
IE: Power Adjustment Type
Values: Common / Individual / None
IE: Inner Loop DL PC Status (optional)
Values: Active / Inactive
84
CRNC Node B
DL POWER CONTROL REQUEST
March 13, 2013 Tusharadri Sarkar](https://image.slidesharecdn.com/nodebapplicationpart-130704124657-phpapp02/85/NodeB-Application-Part-84-320.jpg)
NodeB Application Part
- 1. An introduction to Node BAn introduction to Node B Application Part (NBAP)Application Part (NBAP) Tusharadri Sarkar Aricent March 13, 2013 1March 13, 2013 Tusharadri Sarkar
- 2. Iub Interface and NBAP Functions of NBAP NBAP Procedures NBAP Common Procedures NBAP Dedicated Procedures Questions and Answers AgendaAgenda 2Tusharadri Sarkar
- 3. Iub Interface and NBAPIub Interface and NBAP
- 4. Iub Interface : RNC and NodeBIub Interface : RNC and NodeB Iub interface connects NodeB and RNC of UTRAN The NBAP protocol stack used for NBAP signaling is shown above 4March 13, 2013 Tusharadri Sarkar
- 5. Iub Interface : RNC and NodeBIub Interface : RNC and NodeB NBAP protocol stack is supported on both ATM and IP 5March 13, 2013 Tusharadri Sarkar
- 6. Functions of NBAPFunctions of NBAP
- 7. Functions of NBAPFunctions of NBAP Cell Configuration Management Common Transport Channel Management System Information Management Resource Event Management Configuration Alignment Measurement on Common Resources Radio Link Management Radio Link Supervision Compressed Mode Control Measurement on Dedicated Resources DL Power Drifting Correction Reporting of General Error Situation 7March 13, 2013 Tusharadri Sarkar
- 8. Functions of NBAPFunctions of NBAP Please refer to Section 7, Table 1 of 3GPP TS 25.433 V11.3.0 (2012-12) for the exhaustive mapping between NBAP Functions and NBAP Elementary procedures. 8March 13, 2013 Tusharadri Sarkar
- 10. NBAP ProceduresNBAP Procedures Some Useful DefinitionsSome Useful Definitions CRNC Communication Context – Contains necessary information for CRNC for communication with a specific UE – CRNC Communication Context ID Node B Communication Context – Contains necessary information for the Node B for communication with a specific UE – Radio Link Setup and Radio Link Deletion Procedures – Node B Communication Context ID Unless explicitly indicated in the procedure description, at any instance in time one protocol peer shall have a maximum of one ongoing dedicated NBAP procedure related to a certain Node B Communication Context 10March 13, 2013 Tusharadri Sarkar
- 11. NBAP ProceduresNBAP Procedures Some Useful DefinitionsSome Useful Definitions All NBAP Elementary Procedures are divided into TWO Types – NBAP Common Procedures – NBAP Dedicated Procedures Also, based on the response types, all Elementary Procedures are divided into TWO classes – Class 1 Elementary Procedures – Class 2 Elementary Procedures Please refer to Section 8, Table 2 and Table 3 of 3GPP TS 25.433 V11.3.0 (2012-12) for the comprehensive list of all Class 1 and Class 2 elementary procedures 11March 13, 2013 Tusharadri Sarkar
- 12. NBAP ProceduresNBAP Procedures Elements of NBAP CommunicationElements of NBAP Communication NBAP Message : Information Elements (IEs) – Presence (M, O, C) – Criticality (YES, GLOBAL, EACH, none) – Range – Assigned Criticality (10.3.2) The NBAP Header – Message Type and Procedure Code – Message Discriminator – Transaction ID Abstract Syntax (ASN.1) – NBAP ASN.1 definition - ITU-T Rec. X.680 and ITU-T Rec. X.681 – NBAP ASN.1 Basic Packed Encoding Rules (variant) - ITU T Rec. X.691 Please refer to Section 9 3GPP TS 25.433 V11.3.0 (2012-12) for the comprehensive list of all NBAP Messages and corresponding IEs 12March 13, 2013 Tusharadri Sarkar
- 13. NBAP ProceduresNBAP Procedures Elements of NBAP CommunicationElements of NBAP Communication NBAP Message : Protocol Error Handling Transfer Syntax Error – Value range – List of elements – Mandatory IE – Order Abstract Syntax Error: Actual Criticality Information is handled here – Reject IE – Ignore IE and Notify Sender – Ignore IE Logical Error – How to handle in Class1 and Class 2 Elementary Procedures? – The Error Indication Procedure Please refer to Section 10 3GPP TS 25.433 V11.3.0 (2012-12) for the Handling of Unknown, Unforeseen and Erroneous Protocol Data 13March 13, 2013 Tusharadri Sarkar
- 14. NBAP ProceduresNBAP Procedures Elements of NBAP CommunicationElements of NBAP Communication 14March 13, 2013 Tusharadri Sarkar
- 15. NBAP ProceduresNBAP Procedures A quick look at UMTS Channels and their mappingA quick look at UMTS Channels and their mapping 15March 13, 2013 Tusharadri Sarkar
- 16. NBAP ProceduresNBAP Procedures A quick look at UMTS Channels and their mapping (DL)A quick look at UMTS Channels and their mapping (DL) 16March 13, 2013 Tusharadri Sarkar
- 17. NBAP ProceduresNBAP Procedures A quick look at UMTS Channels and their mapping (UL)A quick look at UMTS Channels and their mapping (UL) 17March 13, 2013 Tusharadri Sarkar
- 18. NBAP ProceduresNBAP Procedures A quick look at a typical Node B InitializationA quick look at a typical Node B Initialization 18 Node BNode B RNCRNC Audit Request Procedure CellSetup Procedure System Information Update Procedure Common Transport Setup Procedures for PRACH, AICH, S-CCPCH, FACH, PCH and RACH + ALCAP and FP- Sync. for RACH, FACH and PCH System Information Update Request - SIB 5 Update Resources and Unblock Cell System Information Update Request - SIB 3 March 13, 2013 Tusharadri Sarkar
- 20. NBAP Common ProceduresNBAP Common Procedures 20March 13, 2013 Tusharadri Sarkar
- 21. NBAP Common ProceduresNBAP Common Procedures 21March 13, 2013 Tusharadri Sarkar
- 23. NBAP Common ProceduresNBAP Common Procedures Audit RequiredAudit Required Message: AUDIT REQUIRED INDICATION Node B requests CRNC to perform audit on logical resources Possible Cause: misalignment of state or configuration information CRNC initiates Audit procedure upon receiving this message 23 CRNC Node B AUDIT REQUIRED INDICATION March 13, 2013 Tusharadri Sarkar
- 24. NBAP Common ProceduresNBAP Common Procedures AuditAudit Initiating message: AUDIT REQUEST CRNC may use an audit sequence (more than one Audit proc.) IE: Start Of Audit Sequence Indicator – start of audit sequence, not start of audit sequence Successful Outcome: AUDIT RESPONSE IE: End Of Audit Sequence Indicator – end of audit sequence, not end of audit sequence 24 CRNC Node B AUDIT REQUEST AUDIT RESPONSE March 13, 2013 Tusharadri Sarkar
- 25. NBAP Common ProceduresNBAP Common Procedures AuditAudit 25March 13, 2013 Tusharadri Sarkar
- 26. NBAP Common ProceduresNBAP Common Procedures AuditAudit 26March 13, 2013 Tusharadri Sarkar
- 27. NBAP Common ProceduresNBAP Common Procedures AuditAudit Unsuccessful Outcome: AUDIT FAILURE Node B unable to perform audit on configuration and status of logical resources IE: Cause – Appropriate Cause is sent to CRNC 27 CRNC Node B AUDIT REQUEST AUDIT FAILURE March 13, 2013 Tusharadri Sarkar
- 28. NBAP Common ProceduresNBAP Common Procedures ResetReset Initiating Message: RESET REQUEST Align the resources of Node B and CRNC in the event of an abnormal failure IE: Reset Indicator – Communication Context – Communication Control Port – Node B Successful Outcome: RESET RESPONSE 28 CRNC Layer RESET RESPONSE RESET REQUEST Node B Layer CRNC Layer RESET RESPONSE RESET REQUEST Node B Layer March 13, 2013 Tusharadri Sarkar
- 30. CRNC Node B CELL SETUP RESPONSE CELL SETUP REQUEST NBAP Common ProceduresNBAP Common Procedures Cell SetupCell Setup Initiating Message: CELL SETUP REQUEST Which Cell to Setup? IE: C-ID What Resources to be used? IE: Local Cell ID Important IEs for a Serving Cell URFCN, Maximum Transmission Power, Primary Scrambling Code Synchronization Configuration, Closed Loop Timing Adjustment Mode Primary SCH, Secondary SCH Information Primary CPICH, Secondary CPICH, Primary CCPCH, BCH Information 30March 13, 2013 Tusharadri Sarkar
- 31. CRNC Node B CELL SETUP FAILURE CELL SETUP REQUEST NBAP Common ProceduresNBAP Common Procedures Cell SetupCell Setup Successful Outcome: CELL SETUP RESONSE What will Node B Store? IE: Configuration Generation ID Which channels exists when a cell is successfully configured? P-CPICH, S-CPICH, P-SCH, S-SCH, P-CCPCH and BCH 31 • Unsuccessful Outcome: CELL SETUP FAILURE • IE Configuration Generation ID is unchanged in Node B • Cell state: Not Existing. Appropriate Cause is sent to CRNC March 13, 2013 Tusharadri Sarkar
- 32. CRNC Node B CELL RECONFIGURATION REQUEST CELL RECONFIGURATION RESPONSE NBAP Common ProceduresNBAP Common Procedures Cell ReconfigurationCell Reconfiguration Initiating Message: CELL RECONFIGURATION REQUEST Node B reconfigures the parameters mentioned in the request Primary and Secondary SCH Power P-CPICH and S-CPICH Power BCH Power (from Primary CCPCH Information) Time Slot Configuration and Synchronization Information Maximum Transmission Power Successful Outcome: CELL RECONFIGURATION RESPONSE Node B stores new Configuration Generation ID 32March 13, 2013 Tusharadri Sarkar
- 33. NBAP Common ProceduresNBAP Common Procedures Cell ReconfigurationCell Reconfiguration Unsuccessful Outcome: CELL RECONFIGURATION FAILURE Node B failed to reconfigures at least one parameters Old configuration is retained Node B keeps old Configuration Generation ID Appropriate Cause is sent to CRNC 33 CRNC Node B CELL RECONFIGURATION REQUEST CELL RECONFIGURATION FAILURE March 13, 2013 Tusharadri Sarkar
- 34. NBAP Common ProceduresNBAP Common Procedures Cell DeletionCell Deletion Initiating Message: CELL DELETION REQUEST Node B removes the cell mentioned by C-ID What will be deleted from the Cell? All Common and Dedicated Channels All Radio Links All Node B Communication Contexts having no more RLs All user plane transport bearers corresponding to the removed common and dedicated channels Successful Outcome: CELL DELETION RESPONSE 34 CRNC Node B CELL DELETION RESPONSE CELL DELETION REQUEST March 13, 2013 Tusharadri Sarkar
- 35. Common TransportCommon Transport Channel HandlingChannel Handling
- 36. NBAP Common ProceduresNBAP Common Procedures Common Transport Channel SetupCommon Transport Channel Setup Initiating Message: COMMON TRANSPORT CHANNEL SETUP RQUEST CRNC establishes the necessary resources in Node B regarding – S-CCPCH, FACH, PCH, PICH, PRACH, RACH, AICH[FDD] One request message can configure only one of the combinations – One S-CCPCH, FACHs, PCH and PICH related to that S-CCPCH – One PRACH, one RACH and one AICH [FDD] related to that PRACH 36 CRNC Node B COMMON TRANSPORT CHANNEL SETUP REQUEST COMMON TRANSPORT CHANNEL SETUP RESPONSE March 13, 2013 Tusharadri Sarkar
- 37. NBAP Common ProceduresNBAP Common Procedures Common Transport Channel SetupCommon Transport Channel Setup 37March 13, 2013 Tusharadri Sarkar
- 38. NBAP Common ProceduresNBAP Common Procedures Common Transport Channel SetupCommon Transport Channel Setup 38March 13, 2013 Tusharadri Sarkar
- 39. NBAP Common ProceduresNBAP Common Procedures Common Transport Channel SetupCommon Transport Channel Setup Successful Outcome: COMMON TRANSPORT CHANNEL SETUP RESPONSE Node B stores Configuration Generation ID IE: Common Transport Channel Information Response For each configured common transport channel (FACHs, PCH and RACH), Node B notifies back CRNC with this IE which includes – Common Transport Channel ID – Binding ID – Transport Layer Address Common Transport and Physical Channel state: Enabled Common Physical Channels now exists in the Uu Interface 39March 13, 2013 Tusharadri Sarkar
- 40. NBAP Common ProceduresNBAP Common Procedures Common Transport Channel SetupCommon Transport Channel Setup Unsuccessful Outcome: COMMON TRANSPORT CHANNEL SETUP FAILURE Node B rejects configuration of all channels State of the channels remains same as before Appropriate Cause is sent to CRNC 40 COMMON TRANSPORT CHANNEL SETUP REQUEST CRNC Node B COMMON TRANSPORT CHANNEL SETUP FAILURE March 13, 2013 Tusharadri Sarkar
- 41. NBAP Common ProceduresNBAP Common Procedures Common Transport Channel SetupCommon Transport Channel Setup 41March 13, 2013 Tusharadri Sarkar
- 42. NBAP Common ProceduresNBAP Common Procedures Common Transport Channel ReconfigurationCommon Transport Channel Reconfiguration Initiating Message: COMMON TRANSPORT CHANNEL RECONFIGURATION RQUEST One request message can configure only one of the combinations – One S-CCPCH, FACHs, PCH and PICH related to that S-CCPCH – One PRACH, one RACH and one AICH related to that PRAC Successful Outcome: COMMON TRANSPORT CHANNEL RECONFIGURATION RESPONSE Node B stores the new Configuration Generation ID 42 CRNC Node B COMMON TRANSPORT CHANNEL RECONFIGURATION REQUEST COMMON TRANSPORT CHANNEL RECONFIGURATION RESPONSE March 13, 2013 Tusharadri Sarkar
- 43. NBAP Common ProceduresNBAP Common Procedures Common Transport Channel ReconfigurationCommon Transport Channel Reconfiguration Unsuccessful Outcome: COMMON TRANSPORT CHANNEL RECONFIGURATION FAILURE Node B rejects reconfiguration of all the channels State of the channels remains same as before Appropriate Cause is sent to CRNC 43 CRNC Node B COMMON TRANSPORT CHANNEL RECONFIGURATION REQUEST COMMON TRANSPORT CHANNEL RECONFIGURATION FAILURE March 13, 2013 Tusharadri Sarkar
- 44. NBAP Common ProceduresNBAP Common Procedures Common Transport Channel DeletionCommon Transport Channel Deletion Initiating Message: COMMON TRANSPORT CHANNEL DELETION RQUEST Which one to delete? IE: COMMON PHYSICAL CHANNEL ID If Secondary CCPCH, Node B deletes The S-CCPCH, all FACHs, the PCH supported by that FACH and the PICH supported by that PCH If PRACH, Node B deletes The PRACH, the RACH and the AICH [FDD] supported by that PRACH 44 CRNC Node B COMMON TRANSPORT CHANNEL DELETION REQUEST COMMON TRANSPORT CHANNEL DELETION RESPONSE March 13, 2013 Tusharadri Sarkar
- 45. NBAP Common ProceduresNBAP Common Procedures Common Transport Channel DeletionCommon Transport Channel Deletion Successful Outcome: COMMON TRANSPORT CHANNEL DELETION RESPONSE State of the deleted channels: Non Existing Node B stores new Configuration Generation ID 45March 13, 2013 Tusharadri Sarkar
- 46. Radio Link ManagementRadio Link Management
- 47. NBAP Common ProceduresNBAP Common Procedures Radio Link SetupRadio Link Setup Initiating Message: RADIO LINK SETUP REQUEST It establishes the first Radio Link (RL) for a UE and achieves synchronization in the user plane What channels are established? One or more DCHs on all RLs One HS-DSCH (per Cell) in one RL (Optional) One E-DCH on one or more RLs (Optional) 47 CRNC Node B RADIO LINK SETUP REQUEST RADIO LINK SETUP RESPONSE March 13, 2013 Tusharadri Sarkar
- 48. NBAP Common ProceduresNBAP Common Procedures Radio Link SetupRadio Link Setup 48March 13, 2013 Tusharadri Sarkar
- 49. NBAP Common ProceduresNBAP Common Procedures Radio Link SetupRadio Link Setup 49March 13, 2013 Tusharadri Sarkar
- 50. NBAP Common ProceduresNBAP Common Procedures Radio Link SetupRadio Link Setup 50 CRNC Node B RADIO LINK SETUP REQUEST RADIO LINK SETUP FAILURE March 13, 2013 Tusharadri Sarkar
- 52. NBAP Common ProceduresNBAP Common Procedures System Information UpdateSystem Information Update Initiating Message: SYSTEM INFORMATION UPDATE REQUEST Enables Node B to apply The correct scheduling Appropriate contents in the System Information Segment of BCCH When to update BCCH? IE: BCCH Modification Time (Optional) Update BCCH at the time instance starting from the SFN value 52 SYSTEM INFORMATION UPDATE RESPONSE CRNC Node B SYSTEM INFORMATION UPDATE REQUEST March 13, 2013 Tusharadri Sarkar
- 53. NBAP Common ProceduresNBAP Common Procedures System Information UpdateSystem Information Update Which information to update? IE: MIB/SB/SIB Information Priority: MIB > SB/SIB Operations Information Block Addition Information Block Deletion Information Block Update MIB contains: PLMN Identity References to other SIBs SB contains: Scheduling information of number of SIBs SIB contains: Specific system information 53March 13, 2013 Tusharadri Sarkar
- 54. NBAP Common ProceduresNBAP Common Procedures System Information UpdateSystem Information Update Examples of some SIBs SIB 1 PLMN ID list, Cell ID, Cell status, Scheduling info, SIB mapping SIB 3 Information/Parameters for intra-frequency cell reselections SIB 5 Information on inter-frequency neighboring cells SIB 10 + 11 ETWS Successful Outcome: SYSTEM INFORMATIO UPDATE RESPONSE 54 SYSTEM INFORMATION UPDATE FAILURE CRNC Node B SYSTEM INFORMATION UPDATE REQUEST Unsuccessful Outcome: SYSTEM INFORMATIO UPDATE FAILURE Node B discards all changes Appropriate Cause is sent to CRNC March 13, 2013 Tusharadri Sarkar
- 56. NBAP Common ProceduresNBAP Common Procedures Resource Status IndicationResource Status Indication Message: RESOURCE STATUS INDICATION When to update CRNC? – A Local Cell came up at Node B (Existing) – A Local Cell is to be deleted at Node B (Not Existing) – A Local Cell changed its capabilities and/or its resource operational state – Capabilities of a Local Cell have changed – Common physical and/or transport channels have changed their capabilities – A Communication Control Port changes its resource operational state – A Local Cell Group has changed its capability 56 CRNC Node B RESOURCE STATUS INDICATION March 13, 2013 Tusharadri Sarkar
- 57. Measurement On CommonMeasurement On Common ResourcesResources
- 58. NBAP Common ProceduresNBAP Common Procedures Common Measurement InitiationCommon Measurement Initiation Initiating Message: COMMON MEASUREMENT INITIATION REQUEST How to Keep Track? IE: Measurement ID and IE: C-ID What to measure? IE: Common Measurement Type Typical measurement requests SFN-SFN Observed Time Difference Received Total Wideband Power for Cell Portion Transmitted Carrier Power for Cell Portion HS-DSCH required Power for Cell Portion 58 CRNC Node B COMMON MEASUREMENT INITIATION REQUEST COMMON MEASUREMENT INITIATION RESPONSE March 13, 2013 Tusharadri Sarkar
- 59. NBAP Common ProceduresNBAP Common Procedures Common Measurement InitiationCommon Measurement Initiation Node B initiates Common Measurement Reporting Procedure How to report the measurement? IE: Report Characteristics – On Demand – Periodic ( IE: Report Periodicity ) – Event A: above threshold and stays for hysteresis time – Event B: below threshold and stays for hysteresis time – Event C: rises by threshold amount within requested time – Event D: falls by threshold amount within requested time – Event E: start when A, wait for B and then terminate – Event F: start when B, wait for A and then terminate Successful Outcome: COMMON MEASUREMENT INITIATION RESPONSE Node B uses the same Measurement ID as provided in request 59March 13, 2013 Tusharadri Sarkar
- 60. NBAP Common ProceduresNBAP Common Procedures Common Measurement InitiationCommon Measurement Initiation Unsuccessful Outcome: COMMON MEASUREMENT INITIATION FAILURE Node B uses the same Measurement ID as provided in request Appropriate Cause is sent to CRNC 60 CRNC Node B COMMON MEASUREMENT INITIATION REQUEST COMMON MEASUREMENT INITIATION FAILURE March 13, 2013 Tusharadri Sarkar
- 61. CRNC Node B COMMON MEASUREMENT REPORT NBAP Common ProceduresNBAP Common Procedures Common Measurement ReportingCommon Measurement Reporting Message: COMMON MEASUREMENT REPORT Initiated by Node B when requested measurement criteria are met IE: Common Measurement Object Type – Cell – RACH IE: Measurement ID as provided in measurement initiation request IE: Common Measurement Value Information – Measurement available/not available (measurement accuracy fulfillment) IE: Measurement Recovery Report Indicator (optional) – Node B indicated Measurement Available to CRNC when achieved measurement accuracy fulfills the requested measurement accuracy 61March 13, 2013 Tusharadri Sarkar
- 62. NBAP Common ProceduresNBAP Common Procedures Common Measurement TerminationCommon Measurement Termination Message: COMMON MEASUREMENT TERMINATION REQUEST Node B terminates reporting of common measurements corresponding to the received Measurement ID 62 CRNC Node B COMMON MEASUREMENT TERMINATION REQUEST March 13, 2013 Tusharadri Sarkar
- 63. NBAP Common ProceduresNBAP Common Procedures Common Measurement FailureCommon Measurement Failure Message: COMMON MEASUREMENT FAILURE INDICATION Reason: A previously requested measurement can no longer be reported Node B locally terminates the indicated measurement 63 CRNC Node B COMMON MEASUREMENT FAILURE INDICATION March 13, 2013 Tusharadri Sarkar
- 65. NBAP Dedicated ProceduresNBAP Dedicated Procedures 65March 13, 2013 Tusharadri Sarkar
- 66. Radio Link ManagementRadio Link Management
- 67. NBAP Dedicated ProceduresNBAP Dedicated Procedures Radio Link AdditionRadio Link Addition Initiating Message: RADIO LINK ADDITION REQUEST Request for additional RLs for the UE when the Node B Communication Context already exists Difference with RADIO LINK SETUP REQUEST IE: Node B Communication Context ID in place of IE: CRNC Communication Context ID Similarity with RADIO LINK SETUP REQUEST IE: RL Information (parameters of the new RLs to be setup) 67 CRNC Node B RADIO LINK ADDITION REQUEST RADIO LINK ADDITION RESPONSE March 13, 2013 Tusharadri Sarkar
- 68. NBAP Dedicated ProceduresNBAP Dedicated Procedures Radio Link AdditionRadio Link Addition Radio Link Handling: Diversity Combination Control – Should Node B combine the new RL with existing RL? – IE: Diversity Control Field (values: May, Must, Must Not) Radio Link Handling: DL Power Control – What is the transmission power in each DL DPCH? – IE: Initial DL Transmission Power Successful Outcome: RADIO LINK ADDITION RESPONSE Node B continuously attempts UL sync on the Uu interface Should Node B start transmission on the DL DPDCH(s) on the new RL? – IE: Delayed Activation (values: Separate Indication, CFN, none) – IE: Activation CFN 68March 13, 2013 Tusharadri Sarkar
- 69. NBAP Dedicated ProceduresNBAP Dedicated Procedures Radio Link AdditionRadio Link Addition Unsuccessful Outcome: RADIO LINK ADDITION FAILURE Establishment of at least one of the Radio Links unsuccessful Appropriate Cause is sent to CRNC 69 CRNC Node B RADIO LINK ADDITION REQUEST RADIO LINK ADDITION FAILURE March 13, 2013 Tusharadri Sarkar
- 70. QuizQuiz Is the Dedicated Radio Link Setup a NBAP Common procedure or a NBAP Dedicated procedure? 70 Note: There is a Common NBAP Channel as well as a Dedicated NBAP Channel March 13, 2013 Tusharadri Sarkar
- 71. CRNC Node B RADIO LINK RECONFIGURATION PREPARE RADIO LINK RECONFIGURATION READY NBAP Dedicated ProceduresNBAP Dedicated Procedures Synchronized Radio Link ReconfigurationSynchronized Radio Link Reconfiguration CRNC requests new configuration of RL(s) related to an existing Node B Communication Context Reconfiguration happens in two steps Reconfiguration Prepare Reconfiguration Commit Initiating Message: RADIO LINK RECONFIGURATION PREPARE Handling DCHs IE: DCHs to Modify (1..m) IE: DCHs to Add (1..m) IE: DCHs to Delete (1..m) 71March 13, 2013 Tusharadri Sarkar
- 72. NBAP Dedicated ProceduresNBAP Dedicated Procedures Synchronized Radio Link ReconfigurationSynchronized Radio Link Reconfiguration DL Power Control IE: DL Reference Power Handling Physical Channels IE: UL DPCH Information (new Uplink Scrambling Code, UL SIR target) IE: DL DPCH Information (new DL DPCH Power, DL DPCH Slot Format) Signaling Bearer Management IE: Signaling Bearer Request Indicator (Node B allocates new Communication Control Port) HS-DSCH Setup and HS-DCSH Modification IE: HS-DSCH Information(O) and HS-DSCH Information To Modify(O) Handling Radio Links IE: RL Information (O) 72March 13, 2013 Tusharadri Sarkar
- 73. NBAP Dedicated ProceduresNBAP Dedicated Procedures Synchronized Radio Link ReconfigurationSynchronized Radio Link Reconfiguration Successful Outcome: RADIO LINK RECONFIGURATION READY Node B successfully reserved all the necessary resources for reconfiguration of RLs requested by CRNC A Prepared Reconfiguration now exists in Node B 73March 13, 2013 Tusharadri Sarkar
- 74. NBAP Dedicated ProceduresNBAP Dedicated Procedures Synchronized Radio Link ReconfigurationSynchronized Radio Link Reconfiguration Message: RADIO LINK RECONFIGURATION COMMIT CRNC orders Node B to switch to the new configuration for RL(s) When to switch? IE: CFN (M) and IE: Fast Reconfiguration (O) Fast Reconfiguration present: Node B switches to new configuration at the next coming CFN equal to the CFN requested by CRNC Fast Reconfiguration absent: Node B switches to new configuration as soon as it detects that UE has started using the new configuration i.e. UE already started using the new UL Scrambling code The Prepared Reconfiguration is removed from Node B 74 CRNC Node B RADIO LINK RECONFIGURATION COMMIT March 13, 2013 Tusharadri Sarkar
- 75. NBAP Dedicated ProceduresNBAP Dedicated Procedures Unsynchronized Radio Link ReconfigurationUnsynchronized Radio Link Reconfiguration Initiating Message: RADIO LINK RECONFIGURATION REQUEST When there is no need to synchronize the time of switching e.g. reconfiguration of Packet Switched Connections The functions are similar to Synchronized Radio Link Reconfiguration Preparation i.e. DCH addition, DCH modification and DCH deletion HS-DSCH Setup and HS-DSCH modification Handling Physical Channels and Radio Links Signaling Bearer Management and DL Power Control 75 CRNC Node B RADIO LINK RECONFIGURATION REQUEST RADIO LINK RECONFIGURATION RESPONSE March 13, 2013 Tusharadri Sarkar
- 76. NBAP Dedicated ProceduresNBAP Dedicated Procedures Unsynchronized Radio Link ReconfigurationUnsynchronized Radio Link Reconfiguration Successful Outcome: RADIO LINK RECONFIGURATION RESPONSE Node B has successfully allocated the required resources, and changed to the new configuration For each new transport channel being added or modified Node B send a Transport Layer Address and a Binding ID to CRNC 76March 13, 2013 Tusharadri Sarkar
- 77. NBAP Dedicated ProceduresNBAP Dedicated Procedures Unsynchronized Radio Link ReconfigurationUnsynchronized Radio Link Reconfiguration Unsuccessful Outcome: RADIO LINK RECONFIGURATION FAILURE Node B failed to allocate the necessary resources for all the new DCHs of one set of coordinated DCHs requested to be setup Appropriate Cause is sent to CRNC 77 CRNC Node B RADIO LINK RECONFIGURATION REQUEST RADIO LINK RECONFIGURATION FAILURE March 13, 2013 Tusharadri Sarkar
- 78. NBAP Dedicated ProceduresNBAP Dedicated Procedures Radio Link DeletionRadio Link Deletion Initiating Message: RADIO LINK DELETION REQUEST CRNC orders to release one or more resources established Radio Links towards a UE Which RL(s) to be deleted? – RL(s) uniquely identified by RL ID, Node B Communication Context ID and CRNC Communication Context ID Successful Outcome: RADIO LINK DELETION RESPONSE After RL(s) deletion Node B will start UL sync for remaining RLs 78 CRNC Node B RADIO LINK DELETION REQUEST RADIO LINK DELETION RESPONSE March 13, 2013 Tusharadri Sarkar
- 79. Radio Link SupervisionRadio Link Supervision
- 80. NBAP Dedicated ProceduresNBAP Dedicated Procedures Radio Link FailureRadio Link Failure Message: RADIO LINK FAILURE INDICATION Reason: One or more established RLs have failed IE: RL Information One or more individual Radio Link(s) failed IE: RL Information Set One or more Radio Link Set(s) failed RL failure might cause loss of UL sync as well Appropriate Cause is sent to CRNC 80 CRNC Node B RADIO LINK FAILURE INDICATION March 13, 2013 Tusharadri Sarkar
- 81. NBAP Dedicated ProceduresNBAP Dedicated Procedures Radio Link RestorationRadio Link Restoration Message: RADIO LINK RESTORE INDICATION Reason: Node B achieved or re-achieved UL sync of one or more established Radio Links or Radio Link Sets on the Uu Interface IE: RL Information One or more individual Radio Link(s) re-established IE: RL Information Set One or more Radio Link Set(s) re-established This is triggered when UL synchronization detection algorithm finishes successfully and indicates that UL sync exists 81 CRNC Node B RADIO LINK RESTORE INDICATION March 13, 2013 Tusharadri Sarkar
- 82. Radio Link Establishment ProcedurRadio Link Establishment Proceduree Complete PictureComplete Picture 82March 13, 2013 Tusharadri Sarkar
- 83. Downlink Power ControlDownlink Power Control
- 84. NBAP Dedicated ProceduresNBAP Dedicated Procedures Downlink Power Control [FDD]Downlink Power Control [FDD] Message: DL POWER CONTROL REQUEST CRNC wants to control DL transmission power of one or more RLs for any existing Node B Communication Context IE: Power Adjustment Type Values: Common / Individual / None IE: Inner Loop DL PC Status (optional) Values: Active / Inactive 84 CRNC Node B DL POWER CONTROL REQUEST March 13, 2013 Tusharadri Sarkar
- 85. Measurement OnMeasurement On Dedicated ResourcesDedicated Resources
- 86. NBAP Dedicated ProceduresNBAP Dedicated Procedures Dedicated Measurement InitiationDedicated Measurement Initiation Message: DEDICATED MEASUREMENT INITIATION REQUEST Which dedicated resources to perform the measurement on? IE: Node B Communication Context ID How to keep track? IE: Measurement ID What to measure? IE: Dedicated Measurement Object Type IE: Node B Communication Context ID 86 CRNC Node B DEDICATED MEASUREMENT INITIATION REQUEST DEDICATED MEASUREMENT INITIATION RESPONSE March 13, 2013 Tusharadri Sarkar
- 87. NBAP Dedicated ProceduresNBAP Dedicated Procedures Dedicated Measurement InitiationDedicated Measurement Initiation Dedicated Measurement Object Type can be – RL: All indicated Radio Links (IE: RL Information) – RLS: All indicated Radio Link Sets (IE: RL Set Information) – ALL RL: All current and future Radio Links within the Node B Communication Context – ALL RLS: All current and future Radio Link Sets within the Node B Communication Context Special case: ALL NBCC – If Node B Communication Context ID is set to ALL NBCC then measurement is applied on all current and future Node B Communication Contexts controlled via the Communication Control Port on which the request is received 87March 13, 2013 Tusharadri Sarkar
- 88. NBAP Dedicated ProceduresNBAP Dedicated Procedures Dedicated Measurement InitiationDedicated Measurement Initiation Node B initiates Dedicated Measurement Reporting procedure How to report? IE: Reporting Characteristics Values are similar to the Common Measurement Reporting procedure (On Demand, Periodic, A, B, C, D. E, F) Dedicated measurement can not be initiated if there exists a Prepared Reconfiguration, except it is a ALL NBCC case Successful Outcome: DEDICATED MEASUREMENT INITIATION RESPONSE Node B uses the same Measurement ID as received in request 88March 13, 2013 Tusharadri Sarkar
- 89. NBAP Dedicated ProceduresNBAP Dedicated Procedures Dedicated Measurement InitiationDedicated Measurement Initiation Unsuccessful Outcome: DEDICATED MEASUREMENT INITIATION FAILURE Node B uses the Measurement ID as received in request Appropriate Cause is sent to CRNC 89 CRNC Node B DEDICATED MEASUREMENT INITIATION REQUEST DEDICATED MEASUREMENT INITIATION FAILURE March 13, 2013 Tusharadri Sarkar
- 90. NBAP Dedicated ProceduresNBAP Dedicated Procedures Dedicated Measurement ReportingDedicated Measurement Reporting Message: DEDICATED MEASUREMENT REPORT Initiated by Node B when requested measurement criteria are met IE: Dedicated Measurement Object Type RL / ALL RL RLS / ALL RLS IE: Measurement ID as provided in measurement initiation request IE: Dedicated Measurement Value Information IE: Measurement Recovery Report Indicator 90 CRNC Node B DEDICATED MEASUREMENT REPORT March 13, 2013 Tusharadri Sarkar
- 91. NBAP Dedicated ProceduresNBAP Dedicated Procedures Dedicated Measurement TerminationDedicated Measurement Termination Message: DEDICATED MEASUREMENT TERMINATION REQUEST Node B terminates reporting of dedicated measurements corresponding to the received Measurement ID IE Dedicated Measurement Termination can not be initiated if there exists a Prepared Reconfiguration, except the ALL NBCC case 91 CRNC Node B DEDICATED MEASUREMENT TERMINATION REQUEST March 13, 2013 Tusharadri Sarkar
- 92. NBAP Dedicated ProceduresNBAP Dedicated Procedures Dedicated Measurement FailureDedicated Measurement Failure Message: DEDICATED MEASUREMENT FAILURE INDICATIN Reason: A previously requested dedicated measurement can no longer be reported Once Node B has sent RADIO LINK SETUP RESPONSE it can initiates Dedicated Measurement Failure procedure at any time If the measurement was started with Node B Communication Context ID set to ALL NBCC and Node B initiates Dedicated Measurement Failure procedure then the CRNC Communication Context ID is set to ALL CRNCCC 92 CRNC Node B DEDICATED MEASUREMENT FAILURE INDICATION March 13, 2013 Tusharadri Sarkar
- 93. Questions and AnswersQuestions and Answers
Editor's Notes
- #3: 07/04/13
- #8: Cell Configuration Management: This function gives the CRNC the possibility to manage the cell configuration information in a Node B. Common Transport Channel Management: This function gives the CRNC the possibility to manage configuration of Common Transport Channels in a Node B. System Information Management: This function gives the CRNC the ability to manage the scheduling of System Information to be broadcast in a cell. Resource Event Management: This function gives the Node B the ability to inform the CRNC about the status of Node B resources. Configuration Alignment: This function gives the CRNC and the Node B the possibility to verify and enforce that both nodes have the same information on the configuration of the radio resources. Measurements on Common Resources: This function allows the CRNC to initiate measurements on common resources in the Node B. The function also allows the Node B to report the result of the measurements. Radio Link Management: This function allows the CRNC to manage radio links using dedicated resources in a Node B. Radio Link Supervision: This function allows the CRNC to report failures and restorations of a Radio Link. Compressed Mode Control [FDD]: This function allows the CRNC to control the usage of compressed mode in a Node B. Measurements on Dedicated Resources: This function allows the CRNC to initiate measurements on dedicated resources in the Node B. The function also allows the Node B to report the result of the measurements. DL Power Drifting Correction [FDD]: This function allows the CRNC to adjust the DL power level of one or more Radio Links in order to avoid DL power drifting between the Radio Links. Reporting of General Error Situations: This function allows reporting of general error situations, for which function specific error messages have not been defined.
- #11: Node B Communication Context: The Node B Communication Context contains the necessary information for the Node B for communication with a specific UE. The Node B Communication Context is created by the Radio Link Setup procedure and deleted by the Radio Link Deletion procedure when deleting the last Radio Link within the Node B Communication Context. The Node B Communication Context is identified by the Node B Communication Context ID.
- #12: NBAP common procedures are procedures that request initiation of a Node B Communication Context for a specific UE in Node B or are not related to a specific UE. NBAP common procedures also incorporate logical O&M (TS 25.401) procedures. NBAP dedicated procedures are procedures that are related to a specific Node B Communication Context in Node B. This Node B Communication Context is identified by a Node B Communication Context identity. Class 1 Elementary Procedures are procedures with a response (Success or Failure) Class 2 Elementary Procedures are procedures without a response (Assumed to be successful always).
- #14: Class 1: Where the logical error occurs in a request message of a class 1 procedure, and the procedure has a message to report this unsuccessful outcome, this message shall be sent with an appropriate cause value. Typical cause values are: - Protocol Causes: 1. Semantic Error 2. Message not compatible with receiver state Where the logical error is contained in a request message of a class 1 procedure, and the procedure does not have a message to report this unsuccessful outcome, the procedure shall be terminated and the ERROR INDICATION procedure shall be initiated with an appropriate cause value. The Procedure ID IE, the Triggering Message IE and the Transaction ID IE within the Criticality Diagnostics IE shall then be included in order to identify the message containing the logical error. Where the logical error exists in a response message of a class 1 procedure, the procedure shall be considered as unsuccessfully terminated and local error handling shall be initiated. Class 2: Where the logical error occurs in a message of a class 2 procedure, the procedure shall be terminated and the ERROR INDICATION procedure shall be initiated with an appropriate cause value. The Procedure ID IE, the Triggering Message IE and the Transaction ID IE within the Criticality Diagnostics IE shall then be included in order to identify the message containing the logical error.
- #16: Logical Channels: 1.1. Control Channels (UL/DL) 1.1.1. Broadcast Control Channel (BCCH), Downlink (DL) 1.1.2. Paging Control Channel (PCCH), DL 1.1.3. Dedicated Control Channel (DCCH), UL/DL 1.1.4. Common Control Channel (CCCH), UL/DL 1.2. Traffic Channels (UL/DL) 1.2.1. Dedicated Traffic Channel (DTCH), UL/DL 1.2.2. Common Traffic Channel (CTCH), Unidirectional (one to many) 2. Transport Channels: 2.1. Dedicated Transport Channel (DCH), UL/DL, mapped to DCCH and DTCH 2.2. Broadcast Channel (BCH), DL, mapped to BCCH 2.3. Forward Access Channel (FACH), DL, mapped to BCCH, CCCH, CTCH, DCCH and DTCH 2.4. Paging Channel (PCH), DL, mapped to PCCH 2.5. Random Access Channel (RACH), UL, mapped to CCCH, DCCH and DTCH 2.6. Uplink Common Packet Channel (CPCH), UL, mapped to DCCH and DTCH 2.7. Downlink Shared Channel (DSCH), DL, mapped to DCCH and DTCH 3. Physical Channels: 3.1. Primary Common Control Physical Channel (P-CCPCH), mapped to BCH 3.2. Secondary Common Control Physical Channel (S-CCPCH), mapped to FACH, PCH 3.3. Physical Random Access Channel (PRACH), mapped to RACH 3.4. Dedicated Physical Data Channel (DPDCH), mapped to DCH 3.5. Dedicated Physical Control Channel (DPCCH), mapped to DCH 3.6. Physical Downlink Shared Channel (PDSCH), mapped to DSCH 3.7. Physical Common Packet Channel (PCPCH), mapped to CPCH 3.8. Synchronisation Channel (SCH) 3.9. Common Pilot Channel (CPICH) 3.10. Acquisition Indicator Channel (AICH) 3.11. Paging Indication Channel (PICH) 3.12. CPCH Status Indication Channel (CSICH) 3.13. Collision Detection/Channel Assignment Indication Channel (CD/CA-ICH)
- #24: 8.2.6
- #25: 8.2.7 If the Start Of Audit Sequence Indicator IE in the AUDIT REQUEST message is set to "start of audit sequence" a new audit sequence is started, any ongoing audit sequence shall be aborted and the Node B shall provide (part of the) audit information. If the Start Of Audit Sequence Indicator IE is set to "not start of audit sequence", the Node B shall provide (part of) the remaining audit information not already provided during this audit sequence. If the information provided in the AUDIT RESPONSE message completes the audit sequence, the Node B shall set the End Of Audit Sequence Indicator IE in the AUDIT RESPONSE message to "End of Audit Sequence". If not all audit information has been provided yet as part of the ongoing audit sequence, the Node B shall set the End Of Audit Sequence Indicator IE in the AUDIT RESPONSE message to "Not End of Audit Sequence".
- #26: 9.1.17 The full list of IEs in AUDIT Response Message
- #27: 9.1.17 The full list of IEs in AUDIT Response Message
- #28: 9.2.1.6 The complete list of all possible ‘Cause’ values
- #29: 8.2.19 If the Reset Indicator IE is set to "Communication Context", the Node B shall remove all the indicated Node B Communication Contexts (identified by a Node B Communication Context ID or a CRNC Communication Context ID IE) and all the radio resources allocated for these Node B Communication Contexts. The Node B shall also initiate release of the user plane transport bearers that were involved in these Contexts. After clearing all related resources, the Node B shall return the RESET RESPONSE message to the CRNC. If the Reset Indicator IE is set to "Communication Control Port", the Node B shall remove all the Node B Communication Contexts controlled via the indicated Communication Control Port(s) and all the radio resources allocated for these Node B Communication Contexts. The Node B shall also initiate release of the user plane transport bearers that were involved in these Contexts. After clearing all related resources, the Node B shall return the RESET RESPONSE message to the CRNC. If the Reset Indicator IE is set to "Node B", the Node B shall remove all the Node B Communication Contexts within the Node B and all the radio resources allocated for these Node B Communication Contexts. The Node B shall also initiate release of the user plane transport bearers that were involved in these Contexts. After clearing all related resources, the Node B shall return the RESET RESPONSE message to the CRNC.
- #31: 8.2.12
- #32: 8.2.12 Radio Network Layer Cause: - S-CPICH not supported - Requested Tx Diversity Mode not supported - Power level not supported - Node B Resources unavailable - IPDL not supported - [FDD - S-CPICH power offset support not available] Miscellaneous Cause: - O&M Intervention - Control processing overload - HW failure
- #33: 8.2.13
- #34: 8.2.13 Radio Network Layer Cause: - Power level not supported - Node B Resources unavailable - IPDL not supported - [FDD - S-CPICH power offset support not available] - [FDD - Requested Configuration Not Supported] Miscellaneous Cause: - O&M Intervention - Control processing overload - HW failure
- #35: 8.2.14 Upon reception, the Node B shall remove the cell and any remaining common and dedicated channels within the cell. The states for the cell and the deleted common channels shall be set to Not Existing (TS 25.430 [6]). The Node B shall remove all Radio Links from the Cell and all Node B Communication Contexts that as a result do not have a Radio Link. The Node B shall also initiate release of the user plane transport bearers for the removed common and dedicated channels except the case that there is at least one FACH channel in this cell using the same transport bearer existing in other cell(s) in the Node B. In this case, the Node B shall remove the cell and any remaining common and dedicated channels within the cell but keep the common transport bearer which is used by the remaining common transport channel(s) in other cell(s).
- #37: 8.2.1
- #38: 8.2.1
- #39: 8.2.1 Refer to 9.1.3. for the complete IE set of Common Transport Channel Setup Request message
- #40: 8.2.1 Refer to 9.1.4. for the complete IE set of Common Transport Channel Setup Response message and 9.2.1.14A. for Common Transport Channel Information Response IE.
- #41: 8.2.1 Radio Network Layer Cause: - Cell not available - Power level not supported - Node B Resources unavailable - Requested Tx Diversity Mode not supported - UL SF not supported - DL SF not supported - Common Transport Channel Type not supported - MICH not supported Transport Layer Cause: - Transport Resources Unavailable Miscellaneous Cause: - O&M Intervention - Control processing overload - HW failure
- #43: 8.2.2
- #44: 8.2.2 Radio Network Layer Cause: - Cell not available - Power level not supported - Node B Resources unavailable Transport Layer Cause: - Transport Resources Unavailable Miscellaneous Cause: - O&M Intervention - Control processing overload - HW failure
- #45: 8.2.3
- #46: 8.2.3
- #48: 8.2.17
- #49: 8.2.17 9.2.2.4D DCH FDD Information If the UE Aggregate Maximum Bit Rate IE is contained in the RADIO LINK SETUP REQUEST message, the NodeB shall, if supported, store the received UE Aggregate Maximum Bit Rate parameters to control the aggregate data rate of non GBR traffic for this UE. 9.1.36. Complete List of IEs supported by Radio Link Setup Request
- #50: 8.2.17 If the RADIO LINK SETUP REQUEST message includes a DCH Information IE with multiple DCH Specific Info IEs, then the Node B shall treat the DCHs in the DCH Information IE as a set of co-ordinated DCHs. The Node B shall include these DCHs in the new configuration only if it can include all of them in the new configuration. If the DCH Specific Info IE includes the Unidirectional DCH Indicator IE set to "Uplink DCH only", the Node B shall ignore the Transport Format Set IE for the downlink for this DCH. As a consequence this DCH is not included as a part of the downlink CCTrCH. If the DCH Specific Info IE includes the Unidirectional DCH Indicator IE set to "Downlink DCH only", the Node B shall ignore the Transport Format Set IE for the uplink for this DCH. As a consequence this DCH is not included as a part of the uplink CCTrCH. Response Message: If the RLs are successfully established, the Node B shall and respond with a RADIO LINK SETUP RESPONSE message. After sending the RADIO LINK SETUP RESPONSE message the Node B shall continuously attempt to obtain UL synchronization on the Uu interface. For each RL for which the Delayed Activation IE is not included in the RADIO LINK SETUP REQUEST message, the Node B shall: - [FDD - start transmission on the DL DPDCH(s) of the new RL as specified in TS 25.427 [16].] - [TDD - start transmission on the new RL immediately as specified in TS 25.427 [16].] For each RL for which the Delayed Activation IE is included in the RADIO LINK SETUP REQUEST message, the Node B shall: - if the Delayed Activation IE indicates "Separate Indication": - not start any DL transmission for the concerned RL on the Uu interface; - if the Delayed Activation IE indicates "CFN": - [FDD - start transmission on the DL DPDCH(s) of the new RL as specified in TS 25.427 [16], however never before the CFN indicated in the Activation CFN IE.] - [TDD - start transmission on the new RL at the CFN indicated in the Activation CFN IE as specified in TS 25.427 [16].]
- #51: 8.2.17 Radio Network Layer Cause: - Combining not supported - Combining Resources not available - Requested Tx Diversity Mode not supported - Number of DL codes not supported - Number of UL codes not supported - UL SF not supported - DL SF not supported - Dedicated Transport Channel Type not supported - Downlink Shared Channel Type not supported - Uplink Shared Channel Type not supported - CM not supported - [FDD - DPC mode change not supported] - Delayed Activation not supported - F-DPCH not supported - [FDD - Continuous Packet Connectivity DTX-DRX operation not available] - [FDD - Continuous Packet Connectivity UE DTX Cycle not available] - [FDD - MIMO not available] - E-DCH MAC-d PDU Size Format not available - [FDD - SixtyfourQAM DL and MIMO Combined not available] - [FDD - Multi Cell operation not available.] - [1.28Mcps TDD- MIMO not available] - [1.28Mcps TDD - SixtyfourQAM DL and MIMO Combined not available] - [FDD - TX diversity for MIMO UE on DL Control Channels not available] - [FDD – Single Stream MIMO not available] - [FDD - Multi Cell operation with MIMO not available] - [FDD - Multi Cell operation with Single Stream MIMO not available] - [FDD - Cell Specific Tx Diversity Handling For Multi Cell Operation Not Available] - [FDD - Multi Cell E-DCH operation not available] - [FDD – Frequency Specific Compressed mode operation not available] - [FDD - UL CLTD operation not available] - [FDD - MIMO with four transmit antennas not available] - [FDD - Dual Stream MIMO with four transmit antennas not available] - [FDD – Multiflow operation not available] - [FDD - SixtyfourQAM UL operation not available] - [FDD – UL MIMO operation not available] - [FDD – UL MIMO and SixteenQAM operation not available] - [FDD – UL MIMO and SixtyfourQAM operation not available] Transport Layer Cause: - Transport Resources Unavailable Miscellaneous Cause: - O&M Intervention - Control processing overload - HW failure
- #53: 8.2.16 SFN mod IB_SG_REP = IB_SG_POS
- #54: 8.2.16 MIB – Master Information Block SIB 1 i) Cell Access Related Information - PLMN Identity List, PLMN Identity, TA Code, Cell identity & Cell Status ii) Cell Selection Information - Minimum Receiver Level iii) Scheduling Information - SI message type & Periodicity, SIB mapping Info, SI Window length SIB 2 i) Access Barring Information - Access Probability factor, Access Class Baring List, Access Class Baring Time ii) Semi static Common Channel Configuration - Random Access Parameter, PRACH Configuration iii) UL frequency Information - UL EARFCN, UL Bandwidth, additional emmission SIB 3 Information/Parameters for intra-frequency cell reselections SIB 4 Information on intra-frequency neighboring cells SIB 5 Information on inter-frequency neighboring cells SIB 6 Information for reselection to UMTS (UTRAN) cells SIB 7 Information for reselection to GSM (GERAN) cells SIB 8 Information for reselection to CDMA2000 systems SIB 9 Home eNodeB name – for future LTE femtocell applications SIB 10 + 11 ETWS (Earthquake and Tsunami Warning System) information SIB 12 Commercial Mobile Alerting System (CMAS) information.
- #55: 8.2.16 Radio Network Layer Cause: - SIB Origination in Node B not Supported Miscellaneous Cause: - Hardware failure - Control Processing overload - O&M Intervention
- #57: 8.2.15
- #59: 8.2.8
- #60: 8.2.8 3 Assisting IEs in Report Characteristics are: Measurement Threshold 1 (2 optional) Measurement Hysteresis Time Report Periodicity If the Report Characteristics IE is set to "On Demand" and if the SFN IE is not provided, the Node B shall return the result of the requested measurement immediately. If the SFN IE is provided, it indicates the frame for which the measurement value shall be provided. The provided measurement value shall be the one reported by the layer 3 filter, referred to as point C in the measurement model (TS 25.302 [25]).
- #61: 8.2.8 Radio Network Layer Cause: - Measurement not supported for the object. - Measurement Temporarily not Available
- #62: 8.2.9
- #63: 8.2.10
- #64: 8.2.11
- #68: 8.3.1
- #69: 8.3.1 If all requested RLs are successfully added, the Node B shall respond with a RADIO LINK ADDITION RESPONSE message. After sending the RADIO LINK ADDITION RESPONSE message, the Node B shall continuously attempt to obtain UL synchronisation on the Uu interface. For each RL for which the Delayed Activation IE is not included in the RADIO LINK ADDITION REQUEST message, the Node B shall: - [FDD - start transmission on the DL DPDCH(s) of the new RL as specified in TS 25.427 [16].] - [TDD - start transmission on the new RL immediately as specified in TS 25.427 [16].] For each RL for which the Delayed Activation IE is included in the RADIO LINK ADDITION REQUEST message, the Node B shall: - if the Delayed Activation IE indicates "Separate Indication": - not start any DL transmission for the concerned RL on the Uu interface; - if the Delayed Activation IE indicates "CFN": - [FDD - start transmission on the DL DPDCH(s) of the new RL as specified in TS 25.427 [16], however never before the CFN indicated in the Activation CFN IE.] - [TDD - start transmission on the new RL at the CFN indicated in the Activation CFN IE as specified in TS 25.427 [16].]
- #70: 8.3.1 Radio Network Layer Cause - Combining not supported - Combining Resources not available - Requested Tx Diversity Mode not supported - UL SF not supported - DL SF not supported - Reconfiguration CFN not elapsed - CM not supported - [FDD - DPC Mode change not supported] - Delayed Activation not supported - [FDD - Continuous Packet Connectivity DTX-DRX operation not available] - [FDD - Continuous Packet Connectivity UE DTX Cycle not available] - [FDD - MIMO not available] - [FDD - SixtyfourQAM DL and MIMO Combined not available] - [FDD - Multi Cell operation not available.] - [1.28Mcps TDD- MIMO not available] - [1.28Mcps TDD - SixtyfourQAM DL and MIMO Combined not available] - [FDD - TX diversity for MIMO UE on DL Control Channels not available] - [FDD – Single Stream MIMO not available] - [FDD - Multi Cell operation with MIMO not available.] - [FDD - Multi Cell operation with Single Stream MIMO not available.] - [FDD - Cell Specific Tx Diversity Handling For Multi Cell Operation Not Available] - [FDD - Multi Cell E-DCH operation not available] - [FDD – Frequency Specific Compressed mode operation not available] - [FDD - UL CLTD operation not available] - [FDD - MIMO with four transmit antennas not available] - [FDD - Dual Stream MIMO with four transmit antennas not available] - [FDD – Multiflow operation not available] - [FDD - SixtyfourQAM UL operation not available] - [FDD – UL MIMO operation not available] - [FDD – UL MIMO and SixteenQAM operation not available] - [FDD – UL MIMO and SixtyfourQAM operation not available] Transport Layer Cause - Transport Resources Unavailable Miscellaneous Cause - O&M Intervention - Control processing overload - HW failure
- #71: On the Iub interface, establishment of the first dedicated RL is considered as a NBAP common procedure i.e. all the signaling messages are exchanged via the Node B Control Ports. After the first RL is established the Node B will have a ‘Node B Communication Context’ for the UE identified by the ‘Node B Communication Context ID’. So, further procedures related to that UE will be part of NBAP dedicated procedures i.e. all the signaling messages are exchanged via the Node B Communication Control Ports.
- #72: 8.3.2
- #73: 8.3.2 Signaling bearer rearrangement: If the RADIO LINK RECONFIGURATION PREPARE message includes the Signaling Bearer Request Indicator IE the Node B shall allocate a new Communication Control Port for the control of the Node B Communication Context and include the Target Communication Control Port ID IE in the RADIO LINK RECONFIGURATION READY message.
- #74: 8.3.2
- #75: 8.3.3
- #76: 8.3.5
- #77: 8.3.5
- #78: 8.3.5 Radio Network Layer Cause - CM not supported - [FDD - Continuous Packet Connectivity DTX-DRX operation not available] - [FDD - Continuous Packet Connectivity UE DTX Cycle not available] - [FDD - MIMO not available] - E-DCH MAC-d PDU Size Format not available - [FDD - SixtyfourQAM DL and MIMO Combined not available] - [FDD - Multi Cell operation not available.] - [1.28Mcps TDD - MIMO not available] - [1.28Mcps TDD - SixtyfourQAM DL and MIMO Combined not available] - [FDD – Single Stream MIMO not available] - [FDD - Multi Cell operation with MIMO not available] - [FDD - Multi Cell operation with Single Stream MIMO not available] - [FDD - Multi Cell E-DCH operation not available] - [FDD - UL CLTD operation not available] - [FDD - MIMO with four transmit antennas not available] - [FDD - Dual Stream MIMO with four transmit antennas not available] - [FDD – Multiflow operation not available] - [FDD - SixtyfourQAM UL operation not available] - [FDD – UL MIMO operation not available] - [FDD – UL MIMO and SixteenQAM operation not available] - [FDD – UL MIMO and SixtyfourQAM operation not available] Transport Layer Cause - Transport Resources Unavailable Miscellaneous Cause - O&M Intervention - Control processing overload - HW failure
- #79: 8.3.6
- #81: 8.3.12 Radio Network Layer Causes: - Synchronization Failure - Invalid CM settings Transport Layer Causes: - Transport Resources Unavailable Miscellaneous Causes: - Control Processing Overload - HW Failure - O&M Intervention - Not enough user plane processing resources
- #82: 8.3.13 Please refer to TS 25.214 [10] and TS 25.224 [21] for UL synchronization algorithm.
- #83: 8.3.13 Please refer to TS 25.214 [10] and TS 25.224 [21] for UL synchronization algorithm.
- #85: 8.3.7 The Power Adjustment Type IE defines the characteristic of the power adjustment. If the value of the Power Adjustment Type IE is "Common", the Power Balancing Adjustment Type of the Node B Communication Context shall be set to "Common". As long as the Power Balancing Adjustment Type of the Node B Communication Context is set to "Common", the Node B shall perform the power adjustment (see below) for all existing and future radio links associated with the context identified by the Node B Communication Context ID IE and use a common DL reference power level. If the value of the Power Adjustment Type IE is "Individual", the Power Balancing Adjustment Type of the Node B Communication Context shall be set to "Individual". The Node B shall perform the power adjustment (see below) for all radio links addressed in the message using the given DL Reference Powers per RL. If the Power Balancing Adjustment Type of the Node B Communication Context was set to "Common" before this message was received, power balancing on all radio links not addressed by the DL POWER CONTROL REQUEST message shall remain to be executed in accordance with the existing power balancing parameters which are now considered RL individual parameters. Power balancing will not be started on future radio links without a specific request. If the value of the Power Adjustment Type IE is "None", the Power Balancing Adjustment Type of the Node B Communication Context shall be set to "None" and the Node B shall suspend on going power adjustments for all radio links for the Node B Communication Context. If the Inner Loop DL PC Status IE is present and set to "Active", the Node B shall activate inner loop DL power control for all radio links for the Node B Communication Context. If the Inner Loop DL PC Status IE is present and set to "Inactive", the Node B shall deactivate inner loop DL power control for all radio links for the Node B Communication Context according to ref. TS 25.214 [10].
- #87: 8.3.8 The Dedicated Measurement Initiation procedure shall not be initiated if a Prepared Reconfiguration exists, as defined in subclause 3.1 except when the Node B Communication Context ID IE in the DEDICATED MEASUREMENT INITIATION REQUEST message is set to the reserved value "All NBCC". If the Node B Communication Context ID IE in the DEDICATED MEASUREMENT INITIATION REQUEST message is set to the reserved value "All NBCC", the Dedicated Measurement Initiation procedure may be initiated by the CRNC at any time when the Node B Communication Context exists.
- #88: 8.3.8
- #89: 8.3.8
- #90: 8.3.8 Radio Network Layer cause - Measurement not supported for the object - Measurement Temporarily not Available Miscellaneous Cause - O&M Intervention - Control processing overload - HW failure
- #91: 8.3.9
- #92: 8.3.10
- #93: 8.3.11