Nx9000 spec sheet
0 likes82 views
The document is a product specification sheet for the Motorola NX 9000 NOC Controller. It can centrally control between 1,000 to 10,000 wireless access points across multiple distributed locations using a single controller interface. Key benefits include scalability, reduced hardware costs, simplified deployment and remote management through a centralized controller.
Nx9000 spec sheet
- 1. PRODUCT SPEC SHEET NX 9000 NOC CONTROLLER CENTRAL CONTROL AND REMOTE TROUBLESHOOTING FOR 10,000 ACCESS POINTS LESS IS MORE Motorola’s WiNG 5 WLAN NX 9000 solutions offer all the benefits of 11n—and then some. Our distributed NOC CONTROLLER architecture extends QoS, security and mobility services to the APs so you get optimal direct forwarding and network resilience. That means no As wireless applications are needed at more and more NOC controller. This efficient WLAN architecture makes bottleneck at the wireless sites in your organization, how can you scale your wireless controlling the network easier and reduces the hardware controller immense network efficiently while making sure you can meet the OPEX needed to support large networks. scalability and wireless growing demands that will be placed on it? Using our WiNG 5 WLAN architecture and our NX 9000 NOC Controller, UNIQUE VALUE network capacity, no The NX 9000 takes advantage of the WiNG 5 distributed latency issues for voice you can minimize your capital expenditure while making intelligence to allow you high scalability. It provides applications, and no deployment, control and remote troubleshooting easier zero-touch auto configuration for access points being jitter in your streaming through the use of a single controller interface. deployed accross multiple distributed locations and video. And with our broad The NX 9000 NOC Controller lets you centrally control manages firmware updates via local access points selection of access points networks of 1,000 to 10,000 WLAN access points that are acting as RF domain managers so that WAN traffic is and flexible network geographically dispersed over many small or medium sized minimized. Because the WiNG 5 architecture handles configurations, you get enterprise locations. Clusters of up to 24 WiNG 5 access direct forwarding, QoS and security at the access points, the network you need with less hardware to points intelligently handle traffic flows, QoS, mobility and using one controller doesn’t create a bottleneck in the buy. Let us show you the security at the remote distributed locations while the network as would be expected in traditional hub-and- less complicated, less NX 9000 provides a single point for configuration, policy spoke architectures. The NX 9000 supports 1+1 failover expensive way to more setting and remote troubleshooting. Hotspot configuration, for high availability with no additional licensing fees for capacity, more agility, and security policy management, statistics aggregation and the redundant system. more satisfied users. DHCP/Radius/FTP services are all done by one powerful PAGE 1
- 2. PRODUCT SPEC SHEET NX 9000 NOC CONTROLLER NX 9000 NOC CONTROLLER SPECIFICATIONS CHART PROCESSOR ENVIRONMENTAL Intel® 2.33GHz Xeon® 5140 Dual-Core Processor Operating temperature: 0°C to +40°C (+32°F to +104°F) with maximum rate of change not to exceed 10°C (50°F) per hour 4 MB shared L2 cache and 1333 MHz FSB Non-operating temperature: -20°C to +70°C (-4°F to +158°F) MEMORY Relative Humidity – Non-Operating: 90% non-condensing @ 35°C (95°F) 8 GB RAM System cooling requirements: 2700 BTU/hour max. Error Correcting Code Fully Buffered DDR2 CERTIFICATION HARD DRIVES RoHS 2002/95/EC 2 x 500 GB 7,200 RPM Serial ATA hard drives UL/cUL 60950-1, IEC/EN 60950-1 High reliability Seagate drives with 1.2M hours MTBF FCC 47 CFR Part 15 Sub part B RAID 1 configuration ICES-003, Class A COMMUNICATION PORTS EN 55022/55024/61000 One RJ 45 for console access SCALABILITY 2 GigE ports Up to 10,240 WiNG 5 802.11n access points BAYS HIGH AVAILABILITY Slim Line DVD/CD-ROM N+1 failover with no additional port licensing fees POWER ACCESS POINTS 1 + 1 Redundant power system AP 650, AP 6511, AP 6532, AP 7131 with WiNG 5 500 W PFC auto-ranging power supply o Full Range: 100 ~ 240 VAC at 50 ~ 60 Hz CONFIGURATION CONTROL Steady-state current All WiNG 5 features for policy management including AP zero touch o 2A Nominal, 8A max. at 115V adoption, WLAN/VLAN, QoS, Mobility, Firewall with role based o 1A Nominal, 4A max. at 230V configuration, WIPS, Event History, SMART RF configuration per RF Domain, Hotspot Configuration, Image Storage for All APs. All these Inrush current (at 25°C/77°F ambient cold start for each power unit): features are enforced at the network edge with the WiNG 5 Access o 60A max. at 115V Points. o 100A max. at 230V NETWORK SERVICES WEIGHT Central DHCP server, Radius server, FTP server Without packaging: 24 kg (55 lbs) HEATMAPS AND CLIENT VISUALIZATIONS With packaging: 29 kg (65 lbs) See APs on Floormaps and see Clients Associated, Client Roaming DIMENSIONS History. Coverage Heatmaps on Floorplans. Server appliance dimensions: TROUBLESHOOTING o 89 mm (H) x 419 mm (W) x 546 mm (D) o 3.5”(H) x 16.5”(W) x 21.5”(D) Remote Debug Features, Packet Capture, Statistics and Syslog Sliding rail kit: 660mm (26”) PHYSICAL DISPLAY With packaging: LEDs and LCD Display Showing Model & Firmware Version o 254 mm (H) x 572 mm (W) x 737 mm (D) o 10”(H) x 22.5”(W) x 29”(D) For more information on how the NX 9000 can benefit your business, please visit us on the web at motorola.com/wlan Part number: SS-NX9000. Printed in USA 03/11. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners. ©2011 Motorola Solutions, Inc. All rights reserved. G3-29-105