Light Meter (LM-120)
4 likes•2,784 views
The document provides instructions for using a Light Meter (LM-120) to measure light levels. It describes the components of the light meter, including symbols and buttons. It explains how to power on the meter, remove the sensor cap, select the illuminance scale and range, and properly position the sensor perpendicular to the light source to take measurements. The document also includes a lux level chart to identify standard light levels for residential and commercial properties.
Light Meter (LM-120)
- 1. BuildingPerformanceModule The City University of New York New York City College Of Technology Architectural Technology Department written by Felix Rodriguez Light Meter - (LM-120) March 29, 2015
- 2. BuildingPerformanceModule 2 Understand what the symbols and buttons represent on the Light meter. Left click on the RED number symbol to get a brief description of what each symbol means and its function. Step 1: When taking measurments: Avoid taking a measurement in a humid or wet place or where excessive dust is present. Do not leave this device in direct sunlight for long periods of time where it is hot or damp. Step 3: Always refer back to the Manual when necessary just left click with you mouse. Left click with your mouse on the Specification Button to see the battery life of the meter, it’s range, and operating temperature. This would give you an idea under which conditions this meter may be used. Step 2: Fig. 1 - Light Meters Components Light Meter - (LM-120) Definition: The Light Meter is a meter used for measuring visible light from fluorescent, metal halide, high- pressure sodium or incandescent light sources. Applications: Measure the illumination level in a interior space. Reduce or increase the output level of lighting fixtures. Reduce the energy burden of the building by significantly increasing the efficiency of its lighting system. Photography - Light Exposure Lighting Analysis. Daylighting Analysis. 1 2 8 Manual: LM-120 Light Meter Specs: LM-120 Specifications 3 4 5 6 7 9
- 3. BuildingPerformanceModule 3 Powering and Using the Light Meter: Step 1: Press the Power On button, to turn power on or off. Step 2: Remove the sensor cap and place the sensor perpendicular to the light source. Step 3: Select illuminance scale and range for reading. Step 4: How to properly place the Logger for measuring: Once cap is removed and meter powered on. Sensor automatically displays readings as is pointed towards the light source. Step 4: Press Data Hold button to record on paper your readings. Press again to continue measuring. When done testing, place the sensor conver to pro- tect the filter and sensor. Step 5:
- 4. BuildingPerformanceModule 4 Information: Residential and Commercial Property - Lux Level Chart Identify if your rooms have the standard lux level.