________ __________ _____
Student # Issue Date Hours
28553 9/17/2012 36
Occupational Safety and Health
Supervisor
Has demonstrated academic excellence with distinction by completing all exams, academic requirements and a minimum of 36 hours of
study on required subjects in the OSHAcademy Professional Development Certificate Program. This achievement demonstrates
commitment and professionalism in Occupational Safety and Health.
This is to certify that
Certificate of Completion
OSH Professional Development Program
Original certificates are embossed with the official
OSHAcademy raised stamp. Certificates can be validated on
the OSHAcademy website home page.
__________________________________________
Steven J. Geigle, M.A., CET, CSHM
Director, Instructor (CET#28-362, CSHM#1208)
OSHAcademy OSH Training
Revised 7.3.2012
This training conforms to OSHA CBT Training Standards and
ANSI Z490.1-2009, Criteria for Accepted Practices in Safety,
Health and Environmental Training. OSHAcademy training is
recognized by the National Safety Management Society and the
Institute for Safety and Health Management.
OSHAcademy is a Division of Geigle Safety Group, Inc.
515 NW Saltzman Road #916 Portland OR 97229-6190 USA
Tel: +1.971.327.4103 - Website: www.oshatrain.org
Recognized by
36
NAGARAJ BALLAL BETTAMPADY
NAGARAJ BALLAL BETTAMPADY
28553 9/17/2012
Occupational Safety and Health Supervisor
Has successfully completed a 36-hour course of study in the following
Professional OSH Certificate Program:
OSHAcademy is a division of Geigle Safety Group Inc
515 NW Saltzman Rd. #916 Portland OR USA 97229-6190
Tel: +1.503.292.0654 - Website: www.oshatrain.org
Professional Certificate Program
Student ID Issue Date
Steven J. Geigle, M.A., CET, CSHM
Director, OSHAcademy
OSHAcademy Safety Passport - Training Record
700 Intro to Safety Mgmt
702 Accident Investigation
703 Intro to OSH Training
709 Personal Protective Equip
711 Intro to Ergonomics
712 Safety Supervision
716 Safety Mgmt Sys Analysis
6
6
6
5
4
6
3
Print, cut out, and fold the program card using the guide lines.
Course Hrs.
Revised 6.13.2012
Has successfully completed the following required courses in
the 36-Hour OSH Supervisor Program with a score of 80% or
greater.
NAGARAJ BALLAL BETTAMPADY
Course Hrs.
________ __________ _____
Student # Issue Date Hours
28553 9/14/2012 36
Occupational Safety and Health Trainer
(Train-The-Trainer)
Has demonstrated academic excellence with distinction by completing all exams, academic requirements and a minimum of 36 hours of
study on required subjects in the OSHAcademy Professional Development Certificate Program. This achievement demonstrates
commitment and professionalism in Occupational Safety and Health.
This is to certify that
Certificate of Completion
OSH Professional Development Program
Original certificates are embossed with the official
OSHAcademy raised stamp. Certificates can be validated on
the OSHAcademy website home page.
__________________________________________
Steven J. Geigle, M.A., CET, CSHM
Director, Instructor (CET#28-362, CSHM#1208)
OSHAcademy OSH Training
Revised 7.3.2012
This training conforms to OSHA CBT Training Standards and
ANSI Z490.1-2009, Criteria for Accepted Practices in Safety,
Health and Environmental Training. OSHAcademy training is
recognized by the National Safety Management Society and the
Institute for Safety and Health Management.
OSHAcademy is a Division of Geigle Safety Group, Inc.
515 NW Saltzman Road #916 Portland OR 97229-6190 USA
Tel: +1.971.327.4103 - Website: www.oshatrain.org
Recognized by
36
NAGARAJ BALLAL BETTAMPADY
NAGARAJ BALLAL BETTAMPADY
28553 9/14/2012
Occupational Safety and Health Trainer
Has successfully completed a 36-hour course of study in the following
Professional OSH Certificate Program:
OSHAcademy is a division of Geigle Safety Group Inc
515 NW Saltzman Rd. #916 Portland OR USA 97229-6190
Tel: +1.503.292.0654 - Website: www.oshatrain.org
Professional Certificate Program
Student ID Issue Date
Steven J. Geigle, M.A., CET, CSHM
Director, OSHAcademy
OSHAcademy Safety Passport - Training Record
700 Intro to Safety Mgmt
703 Intro to OSH Training
704 Hazard Analysis and Control
706 Job Hazard Analysis
711 Intro to Ergonomics6
6
5
6
4
4721 Developing OSH Training
723 Conducting OSH Training 5
Print, cut out, and fold the program card using the guide lines.
Course Hrs.
Revised 6.13.2012
Has successfully completed the following required courses in
the 36-Hour OSH Trainer Program with a score of 80% or
greater.
NAGARAJ BALLAL BETTAMPADY
Course Hrs.
__________________________________________
Steven J. Geigle, M.A., CET, CSHM
Director, Instructor (CET#28-362, CSHM#1208)
OSHAcademy OSH Training
Revised 7.3.2012
This training conforms to OSHA CBT Training Standards and
ANSI Z490.1-2009, Criteria for Accepted Practices in Safety,
Health and Environmental Training. OSHAcademy training is
recognized by the National Safety Management Society and the
Institute for Safety and Health Management.
OSHAcademy is a Division of Geigle Safety Group, Inc.
515 NW Saltzman Road #916 Portland OR 97229-6190 USA
Tel: +1.971.327.4103 - Website: www.oshatrain.org
Recognized by
700
________ __________ _____
Student # Issue Date Hrs
28553 9/12/2012 6
NAGARAJ BALLAL BETTAMPADY
Topics covered in this training include: Safety Management System Components, Commitment, Accountability, Employee Involvement, Effective Communications, Hazard Identification and Control
Strategies, Accident Investigation Basics, Safety Education and Training, and Principles of Total Quality Safety Management. Note - OSHA standards may require the employer to provide hands-on
training that involves trainees performing procedures and interacting with equipment and tools in the presence of qualified trainers.
Introduction to Safety Management
________________________________________________________________________________________
Has completed all academy assignments and final course exam requirements for the following OSHAcademy
Occupational Safety and Health Course.
This is to certify that
Certificate of Course Completion
Original certificates must be embossed with the official
OSHAcademy raised stamp.
702
Recognized by
OSHAcademy is a Division of Geigle Safety Group, Inc.
515 NW Saltzman Road #916 Portland OR 97229-6190 USA
Tel: +1.971.327.4103 - Website: www.oshatrain.org
This training conforms to OSHA CBT Training Standards and
ANSI Z490.1-2009, Criteria for Accepted Practices in Safety,
Health and Environmental Training. OSHAcademy training is
recognized by the National Safety Management Society and the
Institute for Safety and Health Management.
Revised 7.3.2012
________ __________ _____
Student # Issue Date Hrs
28553 9/17/2012 6
NAGARAJ BALLAL BETTAMPADY
Effective Accident Investigation
________________________________________________________________________________________
Has completed all academy assignments and final course exam requirements for the following OSHAcademy
Occupational Safety and Health Course.
This is to certify that
Certificate of Course Completion
Topics covered in this training include: Purpose of the Accident Investigation, Initiating the Investigation, Documenting the Accident Scene, Conducting Interviews, Conducting Event Analysis,
Determining Surface and Root Causes, Developing Recommendations, Selling Management on Recommendations, and Writing the Accident Report. Note - OSHA standards may require the
employer to provide hands-on training that involves trainees performing procedures and interacting with equipment and tools in the presence of qualified trainers.
__________________________________________
Steven J. Geigle, M.A., CET, CSHM
Director, Instructor (CET#28-362, CSHM#1208)
OSHAcademy OSH Training
Original certificates must be embossed with the official
OSHAcademy raised stamp.
__________________________________________
Steven J. Geigle, M.A., CET, CSHM
Director, Instructor (CET#28-362, CSHM#1208)
OSHAcademy OSH Training
Revised 7.3.2012
This training conforms to OSHA CBT Training Standards and
ANSI Z490.1-2009, Criteria for Accepted Practices in Safety,
Health and Environmental Training. OSHAcademy training is
recognized by the National Safety Management Society and the
Institute for Safety and Health Management.
OSHAcademy is a Division of Geigle Safety Group, Inc.
515 NW Saltzman Road #916 Portland OR 97229-6190 USA
Tel: +1.971.327.4103 - Website: www.oshatrain.org
Recognized by
703
________ __________ _____
Student # Issue Date Hrs
28553 9/12/2012 6
NAGARAJ BALLAL BETTAMPADY________________________________________________________________________________________
Has completed all academy assignments and final course exam requirements for the following OSHAcademy
Occupational Safety and Health Course.
This is to certify that
Certificate of Course Completion
Topics covered in this training include: Definition of Education and Training, Developing the OSH Training Program, Trainer Roles and Responsibilities, Needs Analysis, Developing Goals and
Operational Objectives, Developing Learning Activities, Conducting the Training, Documenting the Training, Evaluating Training Presentation and Program, and Improving the Training Program.
Note - OSHA standards may require the employer to provide hands-on training that involves trainees performing procedures and interacting with equipment and tools in the presence of qualified
trainers.
Introduction to OSH Training
(Train The Trainer I)
Original certificates must be embossed with the official
OSHAcademy raised stamp.
__________________________________________
Steven J. Geigle, M.A., CET, CSHM
Director, Instructor (CET#28-362, CSHM#1208)
OSHAcademy OSH Training
Revised 7.3.2012
This training conforms to OSHA CBT Training Standards and
ANSI Z490.1-2009, Criteria for Accepted Practices in Safety,
Health and Environmental Training. OSHAcademy training is
recognized by the National Safety Management Society and the
Institute for Safety and Health Management.
OSHAcademy is a Division of Geigle Safety Group, Inc.
515 NW Saltzman Road #916 Portland OR 97229-6190 USA
Tel: +1.971.327.4103 - Website: www.oshatrain.org
Recognized by
704 Original certificates must be embossed with the official
OSHAcademy raised stamp.
________ __________ _____
Student # Issue Date Hrs
28553 9/12/2012 5
NAGARAJ BALLAL BETTAMPADY________________________________________________________________________________________
Has completed all academy assignments and final course exam requirements for the following OSHAcademy
Occupational Safety and Health Course.
This is to certify that
Certificate of Course Completion
Topics covered in this training include: Definition of Hazard and Exposure, Hazard Identification Process, Hazard Areas and Categories, Analyzing the Workplace, Hierarchy of Hazard Controls
(Elimination, Substitution, Engineering Controls, Administrative Controls, Personal Protective Equipment), Problem Solving, Writing Effective Recommendations. Note - OSHA standards may
require the employer to provide hands-on training that involves trainees performing procedures and interacting with equipment and tools in the presence of qualified trainers.
Hazard Analysis and Control
__________________________________________
Steven J. Geigle, M.A., CET, CSHM
Director, Instructor (CET#28-362, CSHM#1208)
OSHAcademy OSH Training
Revised 7.3.2012
This training conforms to OSHA CBT Training Standards and
ANSI Z490.1-2009, Criteria for Accepted Practices in Safety,
Health and Environmental Training. OSHAcademy training is
recognized by the National Safety Management Society and the
Institute for Safety and Health Management.
OSHAcademy is a Division of Geigle Safety Group, Inc.
515 NW Saltzman Road #916 Portland OR 97229-6190 USA
Tel: +1.971.327.4103 - Website: www.oshatrain.org
Recognized by
706
________ __________ _____
Student # Issue Date Hrs
28553 9/13/2012 6
NAGARAJ BALLAL BETTAMPADY________________________________________________________________________________________
Has completed all academy assignments and final course exam requirements for the following OSHAcademy
Occupational Safety and Health Course.
This is to certify that
Certificate of Course Completion
Topics covered in this training include: JHA Preparation Principles and Techniques, Determining Probability, Severity and Risk, Prioritizing JHAs, Using the JHA Worksheet, The JHA Process
(Listing the steps, describing hazards, listing preventive measures, writing the safe job procedure), and Improving the JHA Process. Note - OSHA standards may require the employer to provide
hands-on training that involves trainees performing procedures and interacting with equipment and tools in the presence of qualified trainers.
Job Hazard Analysis (JHA)
Original certificates must be embossed with the official
OSHAcademy raised stamp.
________ __________ _____
Student # Issue Date Hrs
28553 9/17/2012 5
NAGARAJ BALLAL BETTAMPADY________________________________________________________________________________________
Has completed all academy assignments and final course exam requirements for the following OSHAcademy
Occupational Safety and Health Course.
This is to certify that
Certificate of Course Completion
Topics covered in this training include: OSHA General Requirements for PPE, PPE Categories, Employee-owned Equipment, PPE Training Requirements, Eye and Face Protection, Respiratory
Protection, Head, Hand and Foot Protection, Electrical Protective Equipment, Hearing Protection, Training Hands-On PPE techniques. Note - OSHA standards may require the employer to
provide hands-on training that involves trainees performing procedures and interacting with equipment and tools in the presence of qualified trainers.
Personal Protective Equipment
Original certificates must be embossed with the official
OSHAcademy raised stamp.
__________________________________________
Steven J. Geigle, M.A., CET, CSHM
Director, Instructor (CET#28-362, CSHM#1208)
OSHAcademy OSH Training
Revised 7.3.2012
This training conforms to OSHA CBT Training Standards and
ANSI Z490.1-2009, Criteria for Accepted Practices in Safety,
Health and Environmental Training. OSHAcademy training is
recognized by the National Safety Management Society and the
Institute for Safety and Health Management.
OSHAcademy is a Division of Geigle Safety Group, Inc.
515 NW Saltzman Road #916 Portland OR 97229-6190 USA
Tel: +1.971.327.4103 - Website: www.oshatrain.org
Recognized by
709
________ __________ _____
Student # Issue Date Hrs
28553 9/13/2012 4
NAGARAJ BALLAL BETTAMPADY________________________________________________________________________________________
Has completed all academy assignments and final course exam requirements for the following OSHAcademy
Occupational Safety and Health Course.
This is to certify that
Certificate of Course Completion
Topics covered in this training include: Ergonomics Definitions, Risk Factor Areas (Person, Task, and Environmental), Impact of Ergonomics Injuries, Controlling Risk Factors (Substitution,
Elimination, Engineering Controls, Administrative Controls, Personal Protective Equipment), Making System Improvements. Note - OSHA standards may require the employer to provide hands-on
training that involves trainees performing procedures and interacting with equipment and tools in the presence of qualified trainers.
Introduction to Ergonomics
Original certificates must be embossed with the official
OSHAcademy raised stamp.
__________________________________________
Steven J. Geigle, M.A., CET, CSHM
Director, Instructor (CET#28-362, CSHM#1208)
OSHAcademy OSH Training
Revised 7.3.2012
This training conforms to OSHA CBT Training Standards and
ANSI Z490.1-2009, Criteria for Accepted Practices in Safety,
Health and Environmental Training. OSHAcademy training is
recognized by the National Safety Management Society and the
Institute for Safety and Health Management.
OSHAcademy is a Division of Geigle Safety Group, Inc.
515 NW Saltzman Road #916 Portland OR 97229-6190 USA
Tel: +1.971.327.4103 - Website: www.oshatrain.org
Recognized by
711
Original certificates must be embossed with the official
OSHAcademy raised stamp.
________ __________ _____
Student # Issue Date Hrs
28553 9/17/2012 6
NAGARAJ BALLAL BETTAMPADY________________________________________________________________________________________
Has completed all academy assignments and final course exam requirements for the following OSHAcademy
Occupational Safety and Health Course.
This is to certify that
Certificate of Course Completion
Topics covered in this training include: Overview of Supervisor Responsibilities, Identifying Hazards, Safety Inspections, Accident Investigation, Job Hazard Analysis, Correcting Hazards,
Providing Safety Training, Basic Safety Leadership Styles, Accountability and Administering Discipline, and Creating an Effective Safety Culture. Note - OSHA standards may require the
employer to provide hands-on training that involves trainees performing procedures and interacting with equipment and tools in the presence of qualified trainers.
Safety Supervision and Leadership
__________________________________________
Steven J. Geigle, M.A., CET, CSHM
Director, Instructor (CET#28-362, CSHM#1208)
OSHAcademy OSH Training
Revised 7.3.2012
This training conforms to OSHA CBT Training Standards and
ANSI Z490.1-2009, Criteria for Accepted Practices in Safety,
Health and Environmental Training. OSHAcademy training is
recognized by the National Safety Management Society and the
Institute for Safety and Health Management.
OSHAcademy is a Division of Geigle Safety Group, Inc.
515 NW Saltzman Road #916 Portland OR 97229-6190 USA
Tel: +1.971.327.4103 - Website: www.oshatrain.org
Recognized by
712
________ __________ _____
Student # Issue Date Hrs
28553 9/17/2012 5
NAGARAJ BALLAL BETTAMPADY________________________________________________________________________________________
Has completed all academy assignments and final course exam requirements for the following OSHAcademy
Occupational Safety and Health Course.
This is to certify that
Certificate of Course Completion
Topics covered in this training include: Safety Management System Concepts and Principles, Safety Management System Elements, Baseline Surveys, Interviewing Techniques, Conducting
Inspections, 5-Why Analysis, Cause and Effect (Fishbone) Diagrams, and Safety Management System Evaluation Principles. Note - OSHA standards may require the employer to provide hands-
on training that involves trainees performing procedures and interacting with equipment and tools in the presence of qualified trainers.
Safety Management System Evaluation
Original certificates must be embossed with the official
OSHAcademy raised stamp.
__________________________________________
Steven J. Geigle, M.A., CET, CSHM
Director, Instructor (CET#28-362, CSHM#1208)
OSHAcademy OSH Training
Revised 7.3.2012
This training conforms to OSHA CBT Training Standards and
ANSI Z490.1-2009, Criteria for Accepted Practices in Safety,
Health and Environmental Training. OSHAcademy training is
recognized by the National Safety Management Society and the
Institute for Safety and Health Management.
OSHAcademy is a Division of Geigle Safety Group, Inc.
515 NW Saltzman Road #916 Portland OR 97229-6190 USA
Tel: +1.971.327.4103 - Website: www.oshatrain.org
Recognized by
716
Original certificates must be embossed with the official
OSHAcademy raised stamp.
________ __________ _____
Student # Issue Date Hrs
28553 9/13/2012 4
NAGARAJ BALLAL BETTAMPADY________________________________________________________________________________________
Has completed all academy assignments and final course exam requirements for the following OSHAcademy
Occupational Safety and Health Course.
This is to certify that
Certificate of Course Completion
Topics covered in this training include: Determining Training and Non-Training Solutions, Training Decision-Tree, Determining Training Needs, Writing Goals and Operational Learning
Objectives, Developing Learning Activities, Sequencing, Training Documentation Requirements and Recommendations. Note - OSHA standards may require the employer to provide hands-on
training that involves trainees performing procedures and interacting with equipment and tools in the presence of qualified trainers.
Developing OSH Training
(Train The Trainer II)
__________________________________________
Steven J. Geigle, M.A., CET, CSHM
Director, Instructor (CET#28-362, CSHM#1208)
OSHAcademy OSH Training
Revised 7.3.2012
This training conforms to OSHA CBT Training Standards and
ANSI Z490.1-2009, Criteria for Accepted Practices in Safety,
Health and Environmental Training. OSHAcademy training is
recognized by the National Safety Management Society and the
Institute for Safety and Health Management.
OSHAcademy is a Division of Geigle Safety Group, Inc.
515 NW Saltzman Road #916 Portland OR 97229-6190 USA
Tel: +1.971.327.4103 - Website: www.oshatrain.org
Recognized by
721
Original certificates must be embossed with the official
OSHAcademy raised stamp.
________ __________ _____
Student # Issue Date Hrs
28553 9/14/2012 5
NAGARAJ BALLAL BETTAMPADY________________________________________________________________________________________
Has completed all academy assignments and final course exam requirements for the following OSHAcademy
Occupational Safety and Health Course.
This is to certify that
Certificate of Course Completion
Topics covered in this training include: Preparation for training, classroom logistics, introductions, presentation sequencing, listening skills, answering questions, handling difficult and hostile
students, adult training concepts and principles, concluding the training. Note - OSHA standards may require the employer to provide hands-on training that involves trainees performing
procedures and interacting with equipment and tools in the presence of qualified trainers.
Conducting OSH Training
(Train The Trainer III)
__________________________________________
Steven J. Geigle, M.A., CET, CSHM
Director, Instructor (CET#28-362, CSHM#1208)
OSHAcademy OSH Training
Revised 7.3.2012
This training conforms to OSHA CBT Training Standards and
ANSI Z490.1-2009, Criteria for Accepted Practices in Safety,
Health and Environmental Training. OSHAcademy training is
recognized by the National Safety Management Society and the
Institute for Safety and Health Management.
OSHAcademy is a Division of Geigle Safety Group, Inc.
515 NW Saltzman Road #916 Portland OR 97229-6190 USA
Tel: +1.971.327.4103 - Website: www.oshatrain.org
Recognized by
723
Student Number: 28553
Congratulations on successfully completing with distinction the required courses one or more of the Professional Development
Certificate Programs listed below. Your accomplishment demonstrates continued academic excellence and a commitment to the
environment and occupational safety and health.
NAGARAJ BALLAL BETTAMPADY
Student Transcript
Geigle Safety Group Inc. 515 NW Saltzman Road #916, Portland, Oregon 97229-6190 USA
www.oshatrain.org - instructor@oshatrain.org +01.971.327.4103.
Total Courses Completed:
Total Hrs:
95
0
95
90
100
0
100
0
0
90
0
0
0
95
95
0
0
0
95
9/12/2012
9/17/2012
9/12/2012
9/12/2012
9/13/2012
9/17/2012
9/13/2012
9/17/2012
9/17/2012
0
Score* DateCourse Title Course Title Date
0
700 Introduction to Safety Management
701 Safety Committee Operations
702 Effective Accident Investigation
703 Introduction to OSH Training
704 Hazard Analysis and Control
705 Hazard Communication Program
706 Job Hazard Analysis (JHA)
707 Effective Committee Meetings
708 OSHA Recordkeeping
709 Personal Protective Equipment (PPE)
710 Energy Control Program (LOTO)
711 Introduction to Ergonomics
712 Safety Supervision and Leadership
713 Confined Space Entry Program
714 Fall Protection Program
715 Electrical Safety Basics
716 Safety Management Sys Analysis
717 Emergency Action Plan
718 Fire Prevention Plan
720 Preventing Workplace Violence
722 Ergonomics Program Management
Score*
721 Developing OSH Training 95 9/13/2012
719 Fleet Safety Management 0
Hrs. Hrs.
6
6
6
6
5
5
6
5
5
5
6
4
6
7
7
7
3
4
6
5
5
4
6
723 Conducting OSH Training 95 9/14/20125
755 Bloodborne Pathogens 02
11
56
Steven J. Geigle, M.A., CSHM, CET
Director, Education and Training
OSHAcademy Occupational Safety and Health Training
This training conforms to U.S. Department of Labor(OSHA) training standards and ANSI Z490.1-2009, Criteria for Accepted
Practices in Safety, Health and Environmental Training. OSHAcademy training is endorsed by the National Safety Management
Society (NSMS) and recognized by the Institute for Safety and Health Management (ISHM). Credit-granting institutions may
validate this training by visiting the OSHAcademy "Graduates" list on the website home page at http://www.oshatrain.org.
750 Introduction to Industrial Hygiene 05
Professional Certificate Program Issue Date Score (%) GPA
9/17/2012
9/14/2012
93.6
48.3
55.0
35.0
95.7
42.248 Hour Occupational Safety and Health Manager 1.69
44 Hour Occupational Safety and Health Specialist 1.40
36 Hour Occupational Safety and Health Supervisor 3.74
36 Hour Occupational Safety and Health Trainer 3.83
36 Safety and Health Committee Leader 2.20
32 Safety and Health Committee Member 1.93
132 Hour Occupational Safety and Health Professional 1.6943.5
* Program Scores and Grade Point Averages (GPA) are not accurate or valid unless the program has been completed.
Recognized by
* A "0" score indicates student did not take course.
** Course 708 is not required for any program. Not applicable for students outside the USA.

OSHA Training # 28553 PDF-1

  • 1.
    ________ __________ _____ Student# Issue Date Hours 28553 9/17/2012 36 Occupational Safety and Health Supervisor Has demonstrated academic excellence with distinction by completing all exams, academic requirements and a minimum of 36 hours of study on required subjects in the OSHAcademy Professional Development Certificate Program. This achievement demonstrates commitment and professionalism in Occupational Safety and Health. This is to certify that Certificate of Completion OSH Professional Development Program Original certificates are embossed with the official OSHAcademy raised stamp. Certificates can be validated on the OSHAcademy website home page. __________________________________________ Steven J. Geigle, M.A., CET, CSHM Director, Instructor (CET#28-362, CSHM#1208) OSHAcademy OSH Training Revised 7.3.2012 This training conforms to OSHA CBT Training Standards and ANSI Z490.1-2009, Criteria for Accepted Practices in Safety, Health and Environmental Training. OSHAcademy training is recognized by the National Safety Management Society and the Institute for Safety and Health Management. OSHAcademy is a Division of Geigle Safety Group, Inc. 515 NW Saltzman Road #916 Portland OR 97229-6190 USA Tel: +1.971.327.4103 - Website: www.oshatrain.org Recognized by 36 NAGARAJ BALLAL BETTAMPADY
  • 2.
    NAGARAJ BALLAL BETTAMPADY 285539/17/2012 Occupational Safety and Health Supervisor Has successfully completed a 36-hour course of study in the following Professional OSH Certificate Program: OSHAcademy is a division of Geigle Safety Group Inc 515 NW Saltzman Rd. #916 Portland OR USA 97229-6190 Tel: +1.503.292.0654 - Website: www.oshatrain.org Professional Certificate Program Student ID Issue Date Steven J. Geigle, M.A., CET, CSHM Director, OSHAcademy OSHAcademy Safety Passport - Training Record 700 Intro to Safety Mgmt 702 Accident Investigation 703 Intro to OSH Training 709 Personal Protective Equip 711 Intro to Ergonomics 712 Safety Supervision 716 Safety Mgmt Sys Analysis 6 6 6 5 4 6 3 Print, cut out, and fold the program card using the guide lines. Course Hrs. Revised 6.13.2012 Has successfully completed the following required courses in the 36-Hour OSH Supervisor Program with a score of 80% or greater. NAGARAJ BALLAL BETTAMPADY Course Hrs.
  • 3.
    ________ __________ _____ Student# Issue Date Hours 28553 9/14/2012 36 Occupational Safety and Health Trainer (Train-The-Trainer) Has demonstrated academic excellence with distinction by completing all exams, academic requirements and a minimum of 36 hours of study on required subjects in the OSHAcademy Professional Development Certificate Program. This achievement demonstrates commitment and professionalism in Occupational Safety and Health. This is to certify that Certificate of Completion OSH Professional Development Program Original certificates are embossed with the official OSHAcademy raised stamp. Certificates can be validated on the OSHAcademy website home page. __________________________________________ Steven J. Geigle, M.A., CET, CSHM Director, Instructor (CET#28-362, CSHM#1208) OSHAcademy OSH Training Revised 7.3.2012 This training conforms to OSHA CBT Training Standards and ANSI Z490.1-2009, Criteria for Accepted Practices in Safety, Health and Environmental Training. OSHAcademy training is recognized by the National Safety Management Society and the Institute for Safety and Health Management. OSHAcademy is a Division of Geigle Safety Group, Inc. 515 NW Saltzman Road #916 Portland OR 97229-6190 USA Tel: +1.971.327.4103 - Website: www.oshatrain.org Recognized by 36 NAGARAJ BALLAL BETTAMPADY
  • 4.
    NAGARAJ BALLAL BETTAMPADY 285539/14/2012 Occupational Safety and Health Trainer Has successfully completed a 36-hour course of study in the following Professional OSH Certificate Program: OSHAcademy is a division of Geigle Safety Group Inc 515 NW Saltzman Rd. #916 Portland OR USA 97229-6190 Tel: +1.503.292.0654 - Website: www.oshatrain.org Professional Certificate Program Student ID Issue Date Steven J. Geigle, M.A., CET, CSHM Director, OSHAcademy OSHAcademy Safety Passport - Training Record 700 Intro to Safety Mgmt 703 Intro to OSH Training 704 Hazard Analysis and Control 706 Job Hazard Analysis 711 Intro to Ergonomics6 6 5 6 4 4721 Developing OSH Training 723 Conducting OSH Training 5 Print, cut out, and fold the program card using the guide lines. Course Hrs. Revised 6.13.2012 Has successfully completed the following required courses in the 36-Hour OSH Trainer Program with a score of 80% or greater. NAGARAJ BALLAL BETTAMPADY Course Hrs.
  • 5.
    __________________________________________ Steven J. Geigle,M.A., CET, CSHM Director, Instructor (CET#28-362, CSHM#1208) OSHAcademy OSH Training Revised 7.3.2012 This training conforms to OSHA CBT Training Standards and ANSI Z490.1-2009, Criteria for Accepted Practices in Safety, Health and Environmental Training. OSHAcademy training is recognized by the National Safety Management Society and the Institute for Safety and Health Management. OSHAcademy is a Division of Geigle Safety Group, Inc. 515 NW Saltzman Road #916 Portland OR 97229-6190 USA Tel: +1.971.327.4103 - Website: www.oshatrain.org Recognized by 700 ________ __________ _____ Student # Issue Date Hrs 28553 9/12/2012 6 NAGARAJ BALLAL BETTAMPADY Topics covered in this training include: Safety Management System Components, Commitment, Accountability, Employee Involvement, Effective Communications, Hazard Identification and Control Strategies, Accident Investigation Basics, Safety Education and Training, and Principles of Total Quality Safety Management. Note - OSHA standards may require the employer to provide hands-on training that involves trainees performing procedures and interacting with equipment and tools in the presence of qualified trainers. Introduction to Safety Management ________________________________________________________________________________________ Has completed all academy assignments and final course exam requirements for the following OSHAcademy Occupational Safety and Health Course. This is to certify that Certificate of Course Completion Original certificates must be embossed with the official OSHAcademy raised stamp.
  • 6.
    702 Recognized by OSHAcademy isa Division of Geigle Safety Group, Inc. 515 NW Saltzman Road #916 Portland OR 97229-6190 USA Tel: +1.971.327.4103 - Website: www.oshatrain.org This training conforms to OSHA CBT Training Standards and ANSI Z490.1-2009, Criteria for Accepted Practices in Safety, Health and Environmental Training. OSHAcademy training is recognized by the National Safety Management Society and the Institute for Safety and Health Management. Revised 7.3.2012 ________ __________ _____ Student # Issue Date Hrs 28553 9/17/2012 6 NAGARAJ BALLAL BETTAMPADY Effective Accident Investigation ________________________________________________________________________________________ Has completed all academy assignments and final course exam requirements for the following OSHAcademy Occupational Safety and Health Course. This is to certify that Certificate of Course Completion Topics covered in this training include: Purpose of the Accident Investigation, Initiating the Investigation, Documenting the Accident Scene, Conducting Interviews, Conducting Event Analysis, Determining Surface and Root Causes, Developing Recommendations, Selling Management on Recommendations, and Writing the Accident Report. Note - OSHA standards may require the employer to provide hands-on training that involves trainees performing procedures and interacting with equipment and tools in the presence of qualified trainers. __________________________________________ Steven J. Geigle, M.A., CET, CSHM Director, Instructor (CET#28-362, CSHM#1208) OSHAcademy OSH Training Original certificates must be embossed with the official OSHAcademy raised stamp.
  • 7.
    __________________________________________ Steven J. Geigle,M.A., CET, CSHM Director, Instructor (CET#28-362, CSHM#1208) OSHAcademy OSH Training Revised 7.3.2012 This training conforms to OSHA CBT Training Standards and ANSI Z490.1-2009, Criteria for Accepted Practices in Safety, Health and Environmental Training. OSHAcademy training is recognized by the National Safety Management Society and the Institute for Safety and Health Management. OSHAcademy is a Division of Geigle Safety Group, Inc. 515 NW Saltzman Road #916 Portland OR 97229-6190 USA Tel: +1.971.327.4103 - Website: www.oshatrain.org Recognized by 703 ________ __________ _____ Student # Issue Date Hrs 28553 9/12/2012 6 NAGARAJ BALLAL BETTAMPADY________________________________________________________________________________________ Has completed all academy assignments and final course exam requirements for the following OSHAcademy Occupational Safety and Health Course. This is to certify that Certificate of Course Completion Topics covered in this training include: Definition of Education and Training, Developing the OSH Training Program, Trainer Roles and Responsibilities, Needs Analysis, Developing Goals and Operational Objectives, Developing Learning Activities, Conducting the Training, Documenting the Training, Evaluating Training Presentation and Program, and Improving the Training Program. Note - OSHA standards may require the employer to provide hands-on training that involves trainees performing procedures and interacting with equipment and tools in the presence of qualified trainers. Introduction to OSH Training (Train The Trainer I) Original certificates must be embossed with the official OSHAcademy raised stamp.
  • 8.
    __________________________________________ Steven J. Geigle,M.A., CET, CSHM Director, Instructor (CET#28-362, CSHM#1208) OSHAcademy OSH Training Revised 7.3.2012 This training conforms to OSHA CBT Training Standards and ANSI Z490.1-2009, Criteria for Accepted Practices in Safety, Health and Environmental Training. OSHAcademy training is recognized by the National Safety Management Society and the Institute for Safety and Health Management. OSHAcademy is a Division of Geigle Safety Group, Inc. 515 NW Saltzman Road #916 Portland OR 97229-6190 USA Tel: +1.971.327.4103 - Website: www.oshatrain.org Recognized by 704 Original certificates must be embossed with the official OSHAcademy raised stamp. ________ __________ _____ Student # Issue Date Hrs 28553 9/12/2012 5 NAGARAJ BALLAL BETTAMPADY________________________________________________________________________________________ Has completed all academy assignments and final course exam requirements for the following OSHAcademy Occupational Safety and Health Course. This is to certify that Certificate of Course Completion Topics covered in this training include: Definition of Hazard and Exposure, Hazard Identification Process, Hazard Areas and Categories, Analyzing the Workplace, Hierarchy of Hazard Controls (Elimination, Substitution, Engineering Controls, Administrative Controls, Personal Protective Equipment), Problem Solving, Writing Effective Recommendations. Note - OSHA standards may require the employer to provide hands-on training that involves trainees performing procedures and interacting with equipment and tools in the presence of qualified trainers. Hazard Analysis and Control
  • 9.
    __________________________________________ Steven J. Geigle,M.A., CET, CSHM Director, Instructor (CET#28-362, CSHM#1208) OSHAcademy OSH Training Revised 7.3.2012 This training conforms to OSHA CBT Training Standards and ANSI Z490.1-2009, Criteria for Accepted Practices in Safety, Health and Environmental Training. OSHAcademy training is recognized by the National Safety Management Society and the Institute for Safety and Health Management. OSHAcademy is a Division of Geigle Safety Group, Inc. 515 NW Saltzman Road #916 Portland OR 97229-6190 USA Tel: +1.971.327.4103 - Website: www.oshatrain.org Recognized by 706 ________ __________ _____ Student # Issue Date Hrs 28553 9/13/2012 6 NAGARAJ BALLAL BETTAMPADY________________________________________________________________________________________ Has completed all academy assignments and final course exam requirements for the following OSHAcademy Occupational Safety and Health Course. This is to certify that Certificate of Course Completion Topics covered in this training include: JHA Preparation Principles and Techniques, Determining Probability, Severity and Risk, Prioritizing JHAs, Using the JHA Worksheet, The JHA Process (Listing the steps, describing hazards, listing preventive measures, writing the safe job procedure), and Improving the JHA Process. Note - OSHA standards may require the employer to provide hands-on training that involves trainees performing procedures and interacting with equipment and tools in the presence of qualified trainers. Job Hazard Analysis (JHA) Original certificates must be embossed with the official OSHAcademy raised stamp.
  • 10.
    ________ __________ _____ Student# Issue Date Hrs 28553 9/17/2012 5 NAGARAJ BALLAL BETTAMPADY________________________________________________________________________________________ Has completed all academy assignments and final course exam requirements for the following OSHAcademy Occupational Safety and Health Course. This is to certify that Certificate of Course Completion Topics covered in this training include: OSHA General Requirements for PPE, PPE Categories, Employee-owned Equipment, PPE Training Requirements, Eye and Face Protection, Respiratory Protection, Head, Hand and Foot Protection, Electrical Protective Equipment, Hearing Protection, Training Hands-On PPE techniques. Note - OSHA standards may require the employer to provide hands-on training that involves trainees performing procedures and interacting with equipment and tools in the presence of qualified trainers. Personal Protective Equipment Original certificates must be embossed with the official OSHAcademy raised stamp. __________________________________________ Steven J. Geigle, M.A., CET, CSHM Director, Instructor (CET#28-362, CSHM#1208) OSHAcademy OSH Training Revised 7.3.2012 This training conforms to OSHA CBT Training Standards and ANSI Z490.1-2009, Criteria for Accepted Practices in Safety, Health and Environmental Training. OSHAcademy training is recognized by the National Safety Management Society and the Institute for Safety and Health Management. OSHAcademy is a Division of Geigle Safety Group, Inc. 515 NW Saltzman Road #916 Portland OR 97229-6190 USA Tel: +1.971.327.4103 - Website: www.oshatrain.org Recognized by 709
  • 11.
    ________ __________ _____ Student# Issue Date Hrs 28553 9/13/2012 4 NAGARAJ BALLAL BETTAMPADY________________________________________________________________________________________ Has completed all academy assignments and final course exam requirements for the following OSHAcademy Occupational Safety and Health Course. This is to certify that Certificate of Course Completion Topics covered in this training include: Ergonomics Definitions, Risk Factor Areas (Person, Task, and Environmental), Impact of Ergonomics Injuries, Controlling Risk Factors (Substitution, Elimination, Engineering Controls, Administrative Controls, Personal Protective Equipment), Making System Improvements. Note - OSHA standards may require the employer to provide hands-on training that involves trainees performing procedures and interacting with equipment and tools in the presence of qualified trainers. Introduction to Ergonomics Original certificates must be embossed with the official OSHAcademy raised stamp. __________________________________________ Steven J. Geigle, M.A., CET, CSHM Director, Instructor (CET#28-362, CSHM#1208) OSHAcademy OSH Training Revised 7.3.2012 This training conforms to OSHA CBT Training Standards and ANSI Z490.1-2009, Criteria for Accepted Practices in Safety, Health and Environmental Training. OSHAcademy training is recognized by the National Safety Management Society and the Institute for Safety and Health Management. OSHAcademy is a Division of Geigle Safety Group, Inc. 515 NW Saltzman Road #916 Portland OR 97229-6190 USA Tel: +1.971.327.4103 - Website: www.oshatrain.org Recognized by 711
  • 12.
    Original certificates mustbe embossed with the official OSHAcademy raised stamp. ________ __________ _____ Student # Issue Date Hrs 28553 9/17/2012 6 NAGARAJ BALLAL BETTAMPADY________________________________________________________________________________________ Has completed all academy assignments and final course exam requirements for the following OSHAcademy Occupational Safety and Health Course. This is to certify that Certificate of Course Completion Topics covered in this training include: Overview of Supervisor Responsibilities, Identifying Hazards, Safety Inspections, Accident Investigation, Job Hazard Analysis, Correcting Hazards, Providing Safety Training, Basic Safety Leadership Styles, Accountability and Administering Discipline, and Creating an Effective Safety Culture. Note - OSHA standards may require the employer to provide hands-on training that involves trainees performing procedures and interacting with equipment and tools in the presence of qualified trainers. Safety Supervision and Leadership __________________________________________ Steven J. Geigle, M.A., CET, CSHM Director, Instructor (CET#28-362, CSHM#1208) OSHAcademy OSH Training Revised 7.3.2012 This training conforms to OSHA CBT Training Standards and ANSI Z490.1-2009, Criteria for Accepted Practices in Safety, Health and Environmental Training. OSHAcademy training is recognized by the National Safety Management Society and the Institute for Safety and Health Management. OSHAcademy is a Division of Geigle Safety Group, Inc. 515 NW Saltzman Road #916 Portland OR 97229-6190 USA Tel: +1.971.327.4103 - Website: www.oshatrain.org Recognized by 712
  • 13.
    ________ __________ _____ Student# Issue Date Hrs 28553 9/17/2012 5 NAGARAJ BALLAL BETTAMPADY________________________________________________________________________________________ Has completed all academy assignments and final course exam requirements for the following OSHAcademy Occupational Safety and Health Course. This is to certify that Certificate of Course Completion Topics covered in this training include: Safety Management System Concepts and Principles, Safety Management System Elements, Baseline Surveys, Interviewing Techniques, Conducting Inspections, 5-Why Analysis, Cause and Effect (Fishbone) Diagrams, and Safety Management System Evaluation Principles. Note - OSHA standards may require the employer to provide hands- on training that involves trainees performing procedures and interacting with equipment and tools in the presence of qualified trainers. Safety Management System Evaluation Original certificates must be embossed with the official OSHAcademy raised stamp. __________________________________________ Steven J. Geigle, M.A., CET, CSHM Director, Instructor (CET#28-362, CSHM#1208) OSHAcademy OSH Training Revised 7.3.2012 This training conforms to OSHA CBT Training Standards and ANSI Z490.1-2009, Criteria for Accepted Practices in Safety, Health and Environmental Training. OSHAcademy training is recognized by the National Safety Management Society and the Institute for Safety and Health Management. OSHAcademy is a Division of Geigle Safety Group, Inc. 515 NW Saltzman Road #916 Portland OR 97229-6190 USA Tel: +1.971.327.4103 - Website: www.oshatrain.org Recognized by 716
  • 14.
    Original certificates mustbe embossed with the official OSHAcademy raised stamp. ________ __________ _____ Student # Issue Date Hrs 28553 9/13/2012 4 NAGARAJ BALLAL BETTAMPADY________________________________________________________________________________________ Has completed all academy assignments and final course exam requirements for the following OSHAcademy Occupational Safety and Health Course. This is to certify that Certificate of Course Completion Topics covered in this training include: Determining Training and Non-Training Solutions, Training Decision-Tree, Determining Training Needs, Writing Goals and Operational Learning Objectives, Developing Learning Activities, Sequencing, Training Documentation Requirements and Recommendations. Note - OSHA standards may require the employer to provide hands-on training that involves trainees performing procedures and interacting with equipment and tools in the presence of qualified trainers. Developing OSH Training (Train The Trainer II) __________________________________________ Steven J. Geigle, M.A., CET, CSHM Director, Instructor (CET#28-362, CSHM#1208) OSHAcademy OSH Training Revised 7.3.2012 This training conforms to OSHA CBT Training Standards and ANSI Z490.1-2009, Criteria for Accepted Practices in Safety, Health and Environmental Training. OSHAcademy training is recognized by the National Safety Management Society and the Institute for Safety and Health Management. OSHAcademy is a Division of Geigle Safety Group, Inc. 515 NW Saltzman Road #916 Portland OR 97229-6190 USA Tel: +1.971.327.4103 - Website: www.oshatrain.org Recognized by 721
  • 15.
    Original certificates mustbe embossed with the official OSHAcademy raised stamp. ________ __________ _____ Student # Issue Date Hrs 28553 9/14/2012 5 NAGARAJ BALLAL BETTAMPADY________________________________________________________________________________________ Has completed all academy assignments and final course exam requirements for the following OSHAcademy Occupational Safety and Health Course. This is to certify that Certificate of Course Completion Topics covered in this training include: Preparation for training, classroom logistics, introductions, presentation sequencing, listening skills, answering questions, handling difficult and hostile students, adult training concepts and principles, concluding the training. Note - OSHA standards may require the employer to provide hands-on training that involves trainees performing procedures and interacting with equipment and tools in the presence of qualified trainers. Conducting OSH Training (Train The Trainer III) __________________________________________ Steven J. Geigle, M.A., CET, CSHM Director, Instructor (CET#28-362, CSHM#1208) OSHAcademy OSH Training Revised 7.3.2012 This training conforms to OSHA CBT Training Standards and ANSI Z490.1-2009, Criteria for Accepted Practices in Safety, Health and Environmental Training. OSHAcademy training is recognized by the National Safety Management Society and the Institute for Safety and Health Management. OSHAcademy is a Division of Geigle Safety Group, Inc. 515 NW Saltzman Road #916 Portland OR 97229-6190 USA Tel: +1.971.327.4103 - Website: www.oshatrain.org Recognized by 723
  • 16.
    Student Number: 28553 Congratulationson successfully completing with distinction the required courses one or more of the Professional Development Certificate Programs listed below. Your accomplishment demonstrates continued academic excellence and a commitment to the environment and occupational safety and health. NAGARAJ BALLAL BETTAMPADY Student Transcript Geigle Safety Group Inc. 515 NW Saltzman Road #916, Portland, Oregon 97229-6190 USA www.oshatrain.org - [email protected] +01.971.327.4103. Total Courses Completed: Total Hrs: 95 0 95 90 100 0 100 0 0 90 0 0 0 95 95 0 0 0 95 9/12/2012 9/17/2012 9/12/2012 9/12/2012 9/13/2012 9/17/2012 9/13/2012 9/17/2012 9/17/2012 0 Score* DateCourse Title Course Title Date 0 700 Introduction to Safety Management 701 Safety Committee Operations 702 Effective Accident Investigation 703 Introduction to OSH Training 704 Hazard Analysis and Control 705 Hazard Communication Program 706 Job Hazard Analysis (JHA) 707 Effective Committee Meetings 708 OSHA Recordkeeping 709 Personal Protective Equipment (PPE) 710 Energy Control Program (LOTO) 711 Introduction to Ergonomics 712 Safety Supervision and Leadership 713 Confined Space Entry Program 714 Fall Protection Program 715 Electrical Safety Basics 716 Safety Management Sys Analysis 717 Emergency Action Plan 718 Fire Prevention Plan 720 Preventing Workplace Violence 722 Ergonomics Program Management Score* 721 Developing OSH Training 95 9/13/2012 719 Fleet Safety Management 0 Hrs. Hrs. 6 6 6 6 5 5 6 5 5 5 6 4 6 7 7 7 3 4 6 5 5 4 6 723 Conducting OSH Training 95 9/14/20125 755 Bloodborne Pathogens 02 11 56 Steven J. Geigle, M.A., CSHM, CET Director, Education and Training OSHAcademy Occupational Safety and Health Training This training conforms to U.S. Department of Labor(OSHA) training standards and ANSI Z490.1-2009, Criteria for Accepted Practices in Safety, Health and Environmental Training. OSHAcademy training is endorsed by the National Safety Management Society (NSMS) and recognized by the Institute for Safety and Health Management (ISHM). Credit-granting institutions may validate this training by visiting the OSHAcademy "Graduates" list on the website home page at http://www.oshatrain.org. 750 Introduction to Industrial Hygiene 05 Professional Certificate Program Issue Date Score (%) GPA 9/17/2012 9/14/2012 93.6 48.3 55.0 35.0 95.7 42.248 Hour Occupational Safety and Health Manager 1.69 44 Hour Occupational Safety and Health Specialist 1.40 36 Hour Occupational Safety and Health Supervisor 3.74 36 Hour Occupational Safety and Health Trainer 3.83 36 Safety and Health Committee Leader 2.20 32 Safety and Health Committee Member 1.93 132 Hour Occupational Safety and Health Professional 1.6943.5 * Program Scores and Grade Point Averages (GPA) are not accurate or valid unless the program has been completed. Recognized by * A "0" score indicates student did not take course. ** Course 708 is not required for any program. Not applicable for students outside the USA.