Packet Analysis - Course Technology Computing Conference
Download as PPTX, PDF2 likes2,056 views
The document provides an overview of packet analysis, detailing its uses, tools, and techniques for monitoring and troubleshooting network traffic. It covers specific aspects such as the OSI model, TCP/IP protocol suite, and various packet analyzers like Wireshark, while discussing normal and abnormal traffic patterns, including DNS, FTP, and ICMP. Additionally, it explains methods for detecting network intrusion and issues such as latency and uses tools like Nmap for network scanning.
More Related Content
Similar to Packet Analysis - Course Technology Computing Conference (20)
More from Cengage Learning (20)
Packet Analysis - Course Technology Computing Conference
- 1. Packet Analysis Lisa Bock Pennsylvania College of Technology
- 2. Topics Covered • Overview of Packet Analysis • The OSI Model • The TCP/IP Protocol Suite – Normal Network Communication - TCP and UDP • Abnormal Communication – Scanning – Malware
- 3. Overview of Packet Analysis • Packet analysis uses a packet sniffer, network monitor or analyzer, to monitor and troubleshoot network traffic. • As data flows across the network, the sniffer captures each packet decodes the packet's raw bits – Showing the field values in the packet according to the appropriate RFC or other specifications. • The information can identify bottlenecks and help maintain efficient network data transmission.
- 4. Uses for Packet Analysis • Analyze network problems • Detect network intrusion attempts and network misuse • Perform regulatory compliance through content monitoring perimeter and endpoint traffic • Monitor bandwidth utilization • Verify endpoint security status • Gather and report network statistics
- 5. Common Packet Analyzers • Capsa Network Analyzer • Cain and Abel • Carnivore (FBI - monitors all of a target user's Internet traffic) • dSniff • ettercap • Microsoft Network Monitor • ngrep, Network Grep • OmniPeek • Snoop • Tcpdump • Wireshark (formerly known as Ethereal) • Xplico Open source Network Forensic Analysis Tool
- 6. Xplico
- 7. Packet Capture • Traffic captured is dependent on the placement of the device. • On a switch, the packet sniffer will see only data going to and from the switch to the capture device • Traffic seen will be unicast, broadcast, or multicast. • To see all traffic, port monitoring or SPAN on a switch is used, or use a full duplex tap in line with traffic http://wiki.wireshark.org/CaptureSetup/Ethernet
- 8. The OSI Model • In order to understand packet analysis you must understand the way data is prepared for transit. • The OSI model, is a seven-layer representation of how data changes in form as each layer provides services to the next layer – Data encapsulates or de-encapsulates
- 10. Wireshark • The tool we will use for demonstration is Wireshark http://www.wireshark.org , formerly Ethereal, an open- source packet analyzer. • Download and install Wireshark – make sure you install WinPCap (Windows Packet Capture) if you are using Windows • For a live capture, launch Wireshark and click the name of an interface under Capture Interfaces to start capturing packets on that interface.
- 11. Wireshark Configure advanced features by clicking Options Select the interface with active packet exchange
- 12. The OSI Model • In Wireshark, select any TCP frame and you will see the frame contents from layer 2-7 Data Frame Segment Packet For a review go to http://wiki.wireshark.org/Ethernet
- 13. Help in Wireshark Easily find help in Wireshark-including Sample Captures
- 14. Capture Packets • We will be use pre-captured packets found in your folder and review they normal traffic versus abnormal traffic • Once you open a capture you will see three panes: – The Packet List view - a list of all of the packets received during the capture session. – The middle window is the Details view. – The bottom is the individual Packet Bytes
- 15. TCP Example • Normal traffic • Three-way handshake packets 1,2,3 • Review port numbers, flags, SEQ ACK numbers, stream index • Packets 38-39 FIN packets • Packet 4 get image: File->export objects http://www.symantec.com/connect/articles/studying-normal-traffic-part-three-tcp-headers
- 17. UDP Example Provides connectionless Transport Layer service to other applications on the internet without having to go through a handshake or connection process. It is a simple protocol and that does not provide any ordering or data integrity services. UDP is an unreliable service. Few problems occur with UDP.
- 18. What uses UDP? Commonly used in video streaming and time-sensitive applications. UDP Applications: Domain Name System (DNS) Voice over IP (VoIP) Trivial File Transfer Protocol (TFTP) Domain Host Configuration Protocol (DHCP) Routing Information Protocol (RIP)
- 19. DNS • Filter UDP and you will see the DNS packets • Convert symbolic host names such (google.com) to an IP address (72.14.204.103) • Transfers name information between DNS servers • DNS uses TCP in a zone transfer • Look up other host names such as mail exchange (MX) records • DNS is essential to any network
- 20. Normal DNS Queries/Responses • Client sends query to DNS server for an IP address • Server responds with information it has or asks other DNS servers for the information • All DNS packets have four (4) sections: – Questions – Answer Resource Records – Authority Resources Records – Additional Resource Records
- 21. DNS Packet Structure - Flags If RD is set, it directs the name server to pursue the query recursively.
- 22. • With Fast Flux, a fully qualified domain name will have multiple IP addresses assigned to it. • It manipulate the way the domain name system works and takes advantage of the way load balancing is built into the domain name system. • A botnet can be created with nodes that join and drop off the network and evade capture. Fast Flux DNS Evasion
- 23. Fast Flux DNS • Criminals use a sixty-second time-to-live (TTL) setting for their DNS resource records and swapping the records' associated IP addresses in and out with extreme frequency.
- 24. FTP – Grab a Pic • Purpose of FTP is to transfer files over TCP • Uses both ports 20 and 21 – Command channel is designated on port 21 for the FTP server. – To transfer data like directory contents or files, a secondary channel, port 20 is used. • Filter FTP-data traffic - then follow the TCP stream. Save as .jpg
- 25. Reassemble the Streams • Can reassemble and obtain content if data is not encrypted • Filter ftp-data traffic • Right click follow TCP stream and save the file as raw data and click save as mystery.jpg • Go to where you saved the file and open it!
- 26. Internet Control Message Protocol • ICMP is used by routers, intermediary devices, or hosts to communicate updates or error information to other routers, intermediary devices, or hosts. – Used to troubleshoot network issues – Not used to exchange data between systems • ICMP is used by ping because it can generate echo-request/echo-reply query messages. A Scout for IP!
- 27. Internet Control Message Protocol • Four types of query messages that characterize the output generated by the ping command. – Echo request/echo reply: Used to test reachability – Time stamp request/time stamp reply: Used to compute delay between time stamps – Information request/information reply: Locates address of local IP network – Subnet mask request/subnet mask reply: Subnet information is exchange
- 28. ICMP-Dest Unreachable • RFC 792 –” ICMP is actually an integral part of IP, and must be implemented by every IP module.”
- 29. ICMP Error Codes • Type 3 Destination Unreachable Codes – 0 - Net Unreachable – 1 - Host Unreachable – 2 - Protocol Unreachable • Type 5 Redirect Codes – 0 – Redirect Datagram for Network – 1 – Redirect Datagram for Host – 2 - Redirect Datagram for Type of Service • Type 11 Time Exceeded Codes – 0 – TTL Exceeded – 1 – Fragment Reassembly Time Exceeded • Type 12 Parameter Problem Codes – 0 – Pointer Indicates the Error – 1 – Missing Required Option – 2 - Bad Length
- 30. ICMP - Errors • Frame 5 Destination unreachable port unreachable snmp 161 • A response with a nested packet – We have the IP header to send the packet to the target – After the destination unreachable message returns it sends back the IP header and 64 bits of original datagram • ICMP is used in reconnaissance by Kali Linux http://it-ebooks.info/book/3000/
- 31. BAD Connection • Diagnose performance problems – Use Wireshark's expert system and coloring rules • High latency can be from: – Processing delays – Distance – Queuing delays (BUFFERBLOAT) • Buffers to fill up and remain full at congested links, contributing to excessive traffic delay and losing the ability to perform their intended function of absorbing bursts.
- 32. Identify High Latency Times • In this trace file you can identify delays – First filter on conversations Go to-Statistics then Conversations – Select IPv4 tab SORT Bytes A->B – Right click Apply as a Filter - >Selected A->B
- 33. Identify High Latency Times • Set the Time column to Seconds since Previously Displayed Packet – Sort highest to lowest and you will see: – Retransmissions- Dup ACK’s, Keep-Alives
- 34. Expert System • Using Wireshark’s Expert System to help Identify problems – Clear filter – Lower left hand corner click on the red circle to bring up the expert system
- 35. Zero Window • If the client advertizes a zero window, the application is unable to process quickly enough from the TCP receive buffers. Packet 298
- 36. Network Scans • Nmap is a tool used to discover hosts and services on a network, and create a "map" of the network. – It can be either legitimately or maliciously used to quickly scan thousands of ports, and discrimination between ports in open, closed and filtered states. • By default, Nmap performs a SYN Scan, which works against any TCP stack.
- 37. Nmap • Scanning can be used as a passive attack in the form of reconnaissance. • After running a scan, the software will output results from the IP range you selected: – PortslHosts - the results of the port scan, including the well-known services for those ports. – Topology - an interactive view of the connections between hosts in a network. – Host Details – Details such as the number of ports, IP addresses, hostnames, operating systems, and more.
- 38. Scan – SYN • Same source and destination IP address • Only the SYN flag is set • The destination port numbers of each packet changes as it tries every port http://www.symantec.com/connect/articles/network-intrusion-detection-signatures-part-two
- 39. Scan - ARP • An arp-scan sends ARP packets to hosts on the local network and displays any responses that are received. – ARP packets are not routable • An advantage of ARP scanning is discovering hosts behind a firewall
- 40. Detecting an ARP Scan • Detecting can be difficult if the scanning software is not scanning at a high speed • Below find a comparison of a normal capture to an ARP scan – the right shows a higher packet rate
- 41. SCAN - Port • Full Connect Scan • TCP connect scan is the default TCP scan type when SYN scan is not an option. • A TCP Reset response indicates the port is closed
- 42. SCAN - Port • Packets 18, 19 and 20 we see an actual connection • Then it continues to attempt another connection in Packet 21
- 43. SEC-Bittorrent • BitTorrent uses a distributed sloppy hash table (DHT) for storing peer contact information for "trackerless" torrents. • DHT consists of a number of different queries and corresponding responses. – Ping G used to check if a peer is available. – Find_node G used to find the contact information for a peer. – Get_peers G requests a list of peers which have pieces of the content. – Announce_peer G announces the contact information for the peer to the network. Right click on packet 22 and follow UDP Stream
- 44. Ettercap • Ettercap is an open source tool used to perform a man-in-the-middle attack in a switched environment • Once Ettercap has inserted itself in the middle of a connection, it can capture and examine all communication between the two victims, and launch an attack - such as a DNS spoof
- 45. SEC-ettercap-poisoner • Ettercap also has the ability to actively or passively find other poisoners on the LAN. • This trace file has the signature of Ettercap’s 'Check for Poisoner' function. – Go to the IP header - > ID field of a ping packets contains the signature 0xe77e which is ‘ette’ in Leet speak – Systems that answer back with the same IP ID value are most likely running Ettercap as well.
- 46. Fragmentation Scanning • A scanning technique that fragments IP packets during the port scan in an attempt to bypass some firewall devices. • Instead of just sending the probe packet, it is broken into a couple of small IP fragments. • Splitting up the TCP header over several packets to make it harder for packet filters and IDS to detect. – This method won't work with packet filters and firewalls that queue IP fragments and can cause some systems to crash
- 47. Fragmentation Scanning • Not an attack tool itself, rather it is a technology that allows other attacks to avoid detection by network intrusion detection systems. NOTE: Fragmentation of a packet should rarely occur since MTU discovery techniques now exist.
- 48. SEC-nmap-fragscan • This trace file depicts a system sending an IP fragment scan. • If you examine the IP header, the protocol field indicates that TCP follows. • Manually decode the TCP header to identify the purpose of the TCP packets. Configure your devices!
- 49. SEC-nmap-ipscan • nmap-ipscan is an IP scan used to determine what services are supported directly on top of the IP header. – IRDP, ICMP, EGP. • Sort Info column heading to see a list of protocols queried.
- 50. More Resources • For more Packet Captures go to http://www.netresec.com/?page=PcapFiles • Wireshark Network Analysis, by Laura Chappell, Chappell Binding Paperback ISBN 978-1- 893939-99-8 • Practical Packet Analysis: Using Wireshark to Solve Real-World Network Problems, by Chris Sanders, No Starch Press, Incorporated ISBN-13: 9781593272661 2010