Physical, Thermal and Structural Properties of Chromium (vi) Oxide Powder:Impact of Biofield Treatment

Characterization of Physical, Thermal and Structural Properties of
Chromium (VI) Oxide Powder: Impact of Biofield Treatment
Trivedi Global Inc., 10624 S Eastern Avenue Suite A-969, Henderson, NV 89052, USA
Trivedi Science Research Laboratory Pvt. Ltd., Hall-A, Chinar Mega Mall, Chinar Fortune City, Hoshangabad
Rd., Bhopal- 462026, Madhya Pradesh, India

 Chromium oxide is a strong oxidising agent.
 CrO3 is used in various chemical reactions due to their wide range of oxidations states.
 Chromium (VI) Oxide (CrO3) is an important compound for automobile industries due to its high corrosion
resistance properties.
 It is also used in various pharmaceutical and chemical industries.
 CrO3 is used for plating the chromium on car body and other auto components.
 It is a strong oxidising agent, which enables it to be used in various pharmaceutical and chemical industries.
 It is also reported that Cr (VI) complexes exhibit the antibacterial activity against Pseudomonas aeruginosa
bacteria.
 Furthermore, the crystal structure parameters such as lattice parameter, unit cell volume of CrO3 play a
crucial role in modulating its chemical and physical properties.
Thus, based on the above applications of CrO3 powder, authors planned to investigate an
approach that could modify its physical, thermal and structural properties.
➢ Chromium (VI) Oxide:
➢ Importance:

“The objective of the present study was to evaluate the impact of biofield treatment on
physical, thermal and structural properties of CrO3.”
“Human has ability to harness the energy from environment / universe and can transmit
into any object (living or non-living) around the Globe. The object(s) always receive the
energy and responded into useful way that is called biofield energy and this process is
termed as biofield treatment.”
➢ Objective
➢ Biofield Treatment

“Mr. Mahendra Trivedi is recognized throughout the world for his ability to
transmit a powerful form of energy known as the Trivedi Effect®. The Trivedi
Effect® has the intelligence and versatility to transform all living and non
living organisms.”
➢ The Trivedi Effect

 CrO3 powder was equally divided into two parts, considered as Control and Treated.
 Treated group was in sealed pack and handed over to Mr. Trivedi for biofield treatment under laboratory
condition.
 Mr. Trivedi provided the biofield treatment through his energy transmission process to the treated group
without touching the sample.
➢ In this Study,
Control Treated with Biofield
CrO3
Chromium (VI)
Oxide
Control
CrO3
Chromium (VI)
Oxide
Treated
Biofield
Energy

Thermo Gravimetric
Analysis-Differential
Thermal Analysis (TGA-
DTA)
• Thermal analysis of
control and treated CrO3
was analyzed using
Mettler Toledo
simultaneous TGA and
Differential thermal
analyser (DTA).
X-ray Diffraction Study
(XRD)
• XRD analysis of control
and treated CrO3 powder
was carried out on
Phillips, Holland PW 1710
X-ray diffractometer
system, which had a
copper anode with nickel
filter.
Fourier Transform
Infrared Spectroscopy
(FT-IR)
• FT-IR analysis of control
and treated CrO3
samples was performed
on Shimadzu, Fourier
transform infrared (FT-
IR) spectrometer with
frequency range of 300-
4000 cm-1 was used.
➢ Analysis Techniques

 Thermal analysis of control and treated CrO3 was analysed using Mettler Toledo simultaneous TGA and
Differential thermal analyser (DTA).
 The samples were heated from room temperature to 400°C with a heating rate of 5°C/min under air
atmosphere.
 From DTA, melting point and latent heat of fusion (ΔH) were computed using integral area under peaks.
 Thermal decomposition temperature (Tmax) was recorded from TGA curve.
➢ Formulae :
➢ Thermo Gravimetric Analysis-Differential Thermal Analysis
(TGA-DTA)

 XRD analysis of control and treated CrO3 powder was carried out on Phillips, Holland PW 1710 X-ray
diffractometer system, which had a copper anode with nickel filter.
 The radiation of wavelength used by the XRD system was 1.54056Å.
 The crystallite size (G) was calculated by using formula:
G=kλ/(bCosθ),
Here, λ is the wavelength of radiation used, b is full width half maximum (FWHM) and k is the
equipment constant (0.94).
 The percent change in the lattice parameter was calculated using following equation:
Formulae:
Where AControl and A Treated are the lattice parameter of treated and control samples respectively.
 Similarly, the percent change in all other parameters such as unit cell volume, density, molecular weight,
and crystallite size were calculated.
➢ X-ray Diffraction study (XRD)

 FT-IR spectroscopic analysis was carried out to evaluate the impact of biofield treatment at
atomic and molecular level like bond strength, stability, and rigidity of structure etc.
 FT-IR analysis of control and treated CrO3 samples was performed on Shimadzu, Fourier
transform infrared (FT-IR) spectrometer with frequency range of 300-4000 cm-1 was used.
➢ Fourier Transform Infrared Spectroscopy (FT-IR)

Parameters Control T1 T2 T3 T4
Melting point (°C) 201.43 204.28 204.24 212.65 200.88
% change 1.41 1.40 5.57 -0.27
SDTA integral area at melting point (s°C) -235.53 -252.69 -235.13 -414.03 -142.22
Latent heat of fusion, ΔH (J/g) 486.87 507.37 274.04 235.15 433.09
% change 4.21 -43.71 -51.7 -11.05
Decomposition Temp, Tmax (°C) 330.00 335.00 336.98 333.36 340.12
Percent change 1.52 2.12 1.02 3.07
Percent weight loss at Tmax -13.28 -14.49 -82.57 -10.48 -6.03
Table 1: TGA-DTA analysis of chromium (VI) oxide powder.
➢ Thermo Gravimetric Analysis-Differential Thermal Analysis (TGA-DTA)
 DTA result showed that melting point of control sample was 201.43°C, however it was changed to
204.28°C, 204.24°C, 212.65°C and 200.88°C in treated CrO3 samples T1, T2, T3 and T4, respectively.
 It indicated that melting point was increased by 1.41, 1.40, and 5.57% in T1, T2, and T3, respectively,
whereas a slight change (-0.27%) was observed in T4, as compared to control.

Melting point (°C) 201.43 204.28 204.24 212.65 200.88
% change 1.41 1.40 5.57 -0.27
% change 4.21 -43.71 -51.7 -11.05
Percent change 1.52 2.12 1.02 3.07
 Furthermore, data also showed that the simultaneous DTA (SDTA) integral area (denoted as negative
value) at melting point was 235.53, 252.69, 235.13, 414.03, and 142.22 s °C in control, T1, T2, T3 and
T4, respectively.
 Further, SDTA integral values were used to compute the latent heat of fusion of control and treated
CrO3 samples.

Melting point (°C) 201.43 204.28 204.24 212.65 200.88
% change 1.41 1.40 5.57 -0.27
% change 4.21 -43.71 -51.70 -11.05
Percent change 1.52 2.12 1.02 3.07
 The latent heat of fusion (ΔH) was 486.87J/g in control, whereas it was changed to 507.37, 274.04,
235.15, and 433.09 J/g in T1, T2, T3 and T4 respectively. Thus, data suggest that ΔH was increased by
4.21% in T1, however it was decreased by 43.71, 51.70, and 11.05% in T2, T3 and T4, respectively as
compared to control.

Melting point (°C) 201.43 204.28 204.24 212.65 200.88
% change 1.41 1.40 5.57 -0.27
% change 4.21 -43.71 -51.70 -11.05
Percent change 1.52 2.12 1.02 3.07
 The thermal decomposition temperature (Tmax) was observed at 330°C in control and it was increased to
335, 336.98, 333.4, and 340.1°C in T1, T2, T3 and T4 respectively.
 Tmax was increased by 1.52, 2.12, 1.02, and 3.07% in T1, T2, T3 and T4, respectively as compared to
control.

Melting point (°C) 201.43 204.28 204.24 212.65 200.88
% change 1.41 1.40 5.57 -0.27
% change 4.21 -43.71 -51.70 -11.05
Percent change 1.52 2.12 1.02 3.07
 In this process, samples lost around 13.28, 14.49, 82.57, 10.48, and 6.03% of its weight in control, T1,
T2, T3, and T4, respectively.
Hence, TGA-DTA study revealed that biofield treatment has significantly
altered the thermal properties of CrO3 powder.

➢ X-ray Diffraction Study (XRD)
Figure 1: XRD pattern of chromium (VI) oxide powder. (a) Control and (b) Treated.
 The control sample peaks in XRD pattern were observed at 2θ=21.33°, 26.01°, 26.42°, 31.16°, 37.53°,
37.97°, and 40.03°.
 However, XRD of treated CrO3 sample exhibited peaks at 2θ=21.39°, 26.13°, 26.51°, 31.32°, 37.63°, and
38.11°.
 The intense peaks in XRD pattern of control and treated CrO3 samples suggested its crystalline nature.

➢ X-ray Diffraction Study (XRD)
Figure 2: Effect of biofield treatment on lattice parameter, unit cell volume, density, and molecular weight of treated chromium (VI) oxide
powder as compared to control.
 Data showed that the lattice parameter and unit cell volume was reduced by 0.25 and 0.92%, respectively
as compared to control.
 The change in unit cell volume can be considered as volumetric strain. Herein, negative volumetric strain
found in treated CrO3 indicated that biofield treatment possibly induced compressive stress along the
lattice parameter “a” that led to reduced unit cell volume in treated sample.
 In addition, the Density of treated CrO3 was increased by 0.93% and molecular weight was reduced by
0.92% as compared to control. It could be possible if number of protons and neutron altered after biofield
treatment.
 Hence, XRD data revealed that biofield treatment has altered the physical and structural properties of
CrO3 powder.

 IR spectra exhibited the absorption peaks at 496, 736, 906, and 944 cm-1 in control, whereas these peaks were
shifted to higher wavenumber i.e. 501, 741, 919, and 949 cm-1 in treated CrO3 spectra.
 The wavenumber observed in IR spectra is directly proportional to bond force constant. Thus it is assumed that
the increase in wave number for Cr =O vibration could be due to increase in bond force constant after biofield
treatment.
 Thus, it is hypothesized that the energy transferred through biofield treatment probably enhanced the Cr=O
bond strength in treated CrO3 molecules, which may lead to increase bond force constant, thus increase the
wavenumber.
 In addition, the increase in Cr=O bond strength could increase the stability of CrO3 molecules. It is also
supported by increase in thermal stability of treated CrO3 after biofield treatment.
➢ Fourier Transform Infrared Spectroscopy (FT-IR)
Figure 3: FT-IR spectrum of chromium (VI) oxide powder. (a) Control and (b) Treated.

➢ In Summary….
 Overall, study results suggest that biofield treatment has significantly altered the thermal, physical and
structural properties of CrO3 powder.
 The thermal analysis of CrO3 using TGA-DTA revealed that biofield treatment has altered the melting point,
ΔH, and Tmax.
 It is assumed that biofield treatment probably altered the internal energy of treated CrO3 samples, which
may lead to alter the melting point and ΔH.
 XRD data exhibited the alteration in lattice parameter, unit cell volume, density, and molecular weight in
treated CrO3 as compared to control.
 FT-IR spectra revealed that the absorption peaks were shifted from 906 and 944 cm-1 (control) to higher
wavenumber i.e. 919 and 949 cm-1 in treated CrO3 sample.
 Overall, study results suggest that biofield treatment has significantly altered the
thermal, physical and structural properties of CrO3 powder.
 It is also assumed that biofield treated CrO3 could be useful for chrome plating applications in automobile
industries.

➢ Acknowledgement
 Authors gratefully acknowledged to Dr. Cheng Dong of NLSC, Institute of Physics, and Chinese academy
of Sciences for providing the facilities to use PowderX software for analyzing XRD data. Authors also
would like to thank Trivedi Science, Trivedi master wellness and Trivedi testimonials for their support
during the work.
 Please visit the below links to read the full research paper & references.
o http://trivediscience.com/publications/materials-science-publications/characterization-of-physical-
thermal-and-structural-properties-of-chromium-vi-oxide-powder-impact-of-biofield-treatment/
o http://www.omicsgroup.org/journals/characterization-of-physical-thermal-and-structural-properties-of-
chromium-vi-oxide-powder-impact-of-biofield-treatment-2168-9806-1000128.pdf
➢ Full Research Paper and References:

Physical, Thermal and Structural Properties of Chromium (vi) Oxide Powder:Impact of Biofield Treatment

More Related Content

What's hot (17)

Similar to Physical, Thermal and Structural Properties of Chromium (vi) Oxide Powder:Impact of Biofield Treatment (20)

Recently uploaded (20)

Physical, Thermal and Structural Properties of Chromium (vi) Oxide Powder:Impact of Biofield Treatment