PM.ppt DATA STRUCTURE USING C WITH EXAMPLE PROGRAMES

DEFINITION
 Data structure is representation of the logical relationship
existing between individual elements of data.
 In other words, a data structure is a way of organizing all
data items that considers not only the elements stored but
also their relationship to each other.

INTRODUCTION
 Data structure affects the design of both structural &
functional aspects of a program.
Program=algorithm + Data Structure
 You know that a algorithm is a step by step procedure to solve
a particular function.

INTRODUCTION
 That means, algorithm is a set of instruction written to carry
out certain tasks & the data structure is the way of
organizing the data with their logical relationship retained.
 To develop a program of an algorithm, we should select an
appropriate data structure for that algorithm.
 Therefore algorithm and its associated data structures from a
program.

CLASSIFICATION OF DATA
STRUCTURE
 Data structure are normally divided into two broad
categories:
 Primitive Data Structure
 Non-Primitive Data Structure

STRUCTURE
Data structure
Primitive DS Non-Primitive DS
Integer Float Character Pointer
Float
Integer Float

STRUCTURE
Non-Primitive DS
Linear List Non-Linear List
Array
Link List Stack
Queue Graph Trees

PRIMITIVE DATA
STRUCTURE
 There are basic structures and directly operated upon by
the machine instructions.
 In general, there are different representation on different
computers.
 Integer, Floating-point number, Character constants,
string constants, pointers etc, fall in this category.

NON-PRIMITIVE DATA
STRUCTURE
 There are more sophisticated data structures.
 These are derived from the primitive data structures.
 The non-primitive data structures emphasize on
structuring of a group of homogeneous (same type) or
heterogeneous (different type) data items.

NON-PRIMITIVE DATA
STRUCTURE
 Lists, Stack, Queue, Tree, Graph are example of non-
primitive data structures.
 The design of an efficient data structure must take
operations to be performed on the data structure.

NON-PRIMITIVE DATA
STRUCTURE
 The most commonly used operation on data structure are
broadly categorized into following types:
 Create
 Selection
 Updating
 Searching
 Sorting
 Merging
 Destroy or Delete

DIFFERENT BETWEEN THEM
 A primitive data structure is generally a basic structure
that is usually built into the language, such as an integer,
a float.
 A non-primitive data structure is built out of primitive
data structures linked together in meaningful ways, such
as a or a linked-list, binary search tree, AVL Tree, graph
etc.

DESCRIPTION OF VARIOUS
DATA STRUCTURES : ARRAYS
 An array is defined as a set of finite number of
homogeneous elements or same data items.
 It means an array can contain one type of data only,
either all integer, all float-point number or all character.

ARRAYS
 Simply, declaration of array is as follows:
int arr[10]
 Where int specifies the data type or type of elements arrays
stores.
 “arr” is the name of array & the number specified inside the
square brackets is the number of elements an array can store,
this is also called sized or length of array.

ARRAYS
 Following are some of the concepts to be remembered
about arrays:
 The individual element of an array can
be accessed by specifying name of the
array, following by index or subscript
inside square brackets.
 The first element of the array has index
zero[0]. It means the first element and
last element will be specified as:arr[0]
& arr[9]
Respectively.

ARRAYS
 The elements of array will always be stored
in the consecutive (continues) memory
location.
 The number of elements that can be stored
in an array, that is the size of array or its
length is given by the following equation:
(Upperbound-lowerbound)+1

ARRAYS
 For the above array it would be
(9-0)+1=10,where 0 is the lower bound
of array and 9 is the upper bound of
array.
 Array can always be read or written
through loop. If we read a one-
dimensional array it require one loop for
reading and other for writing the array.

ARRAYS
 For example: Reading an array
For(i=0;i<=9;i++)
scanf(“%d”,&arr[i]);
 For example: Writing an array
For(i=0;i<=9;i++)
printf(“%d”,arr[i]);

ARRAYS
 If we are reading or writing two-
dimensional array it would require two
loops. And similarly the array of a N
dimension would required N loops.
 Some common operation performed on
array are:
Creation of an array
Traversing an array

ARRAYS
 Insertion of new element
 Deletion of required element
 Modification of an element
 Merging of arrays

LISTS
 A lists (Linear linked list) can be defined as a collection of
variable number of data items.
 Lists are the most commonly used non-primitive data
structures.
 An element of list must contain at least two fields, one for
storing data or information and other for storing address of
next element.
 As you know for storing address we have a special data
structure of list the address must be pointer type.

LISTS
 Technically each such element is referred to as a node,
therefore a list can be defined as a collection of nodes as
show bellow:
Head
AAA BBB CCC
Information field Pointer field
[Linear Liked List]

LISTS
 Types of linked lists:
 Single linked list
 Doubly linked list
 Single circular linked list
 Doubly circular linked list

STACK
 A stack is also an ordered collection of elements like
arrays, but it has a special feature that deletion and
insertion of elements can be done only from one end
called the top of the stack (TOP)
 Due to this property it is also called as last in first out
type of data structure (LIFO).

STACK
 It could be through of just like a stack of plates placed on table in
a party, a guest always takes off a fresh plate from the top and the
new plates are placed on to the stack at the top.
 It is a non-primitive data structure.
 When an element is inserted into a stack or removed from the
stack, its base remains fixed where the top of stack changes.

STACK
 Insertion of element into stack is called PUSH and
deletion of element from stack is called POP.
 The bellow show figure how the operations take place on
a stack:
PUSH POP
[STACK]

STACK
 The stack can be implemented into two ways:
 Using arrays (Static implementation)
 Using pointer (Dynamic
implementation)

QUEUE
 Queue are first in first out type of data structure (i.e. FIFO)
 In a queue new elements are added to the queue from one
end called REAR end and the element are always removed
from other end called the FRONT end.
 The people standing in a railway reservation row are an
example of queue.

QUEUE
 Each new person comes and stands at the end of the row
and person getting their reservation confirmed get out of
the row from the front end.
 The bellow show figure how the operations take place on
a stack:
10 20 30 40 50
front rear

QUEUE
 The queue can be implemented into two ways:
 Using arrays (Static implementation)
 Using pointer (Dynamic
implementation)

TREES
 A tree can be defined as finite set of data items (nodes).
 Tree is non-linear type of data structure in which data
items are arranged or stored in a sorted sequence.
 Tree represent the hierarchical relationship between
various elements.

TREES
 In trees:
 There is a special data item at the top of hierarchy called the
Root of the tree.
 The remaining data items are partitioned into number of
mutually exclusive subset, each of which is itself, a tree
which is called the sub tree.
 The tree always grows in length towards bottom in data
structures, unlike natural trees which grows upwards.

TREES
 The tree structure organizes the data into branches,
which related the information.
A
B C
D E F G
root

GRAPH
 Graph is a mathematical non-linear data structure
capable of representing many kind of physical structures.
 It has found application in Geography, Chemistry and
Engineering sciences.
 Definition: A graph G(V,E) is a set of vertices V and a
set of edges E.

GRAPH
 An edge connects a pair of vertices and many have
weight such as length, cost and another measuring
instrument for according the graph.
 Vertices on the graph are shown as point or circles and
edges are drawn as arcs or line segment.

GRAPH
 Example of graph:
v2
v1
v4
v5
v3
10
15
8
6
11
9
v4
v1
v2
v4
v3
[a] Directed &
Weighted Graph
[b] Undirected Graph

GRAPH
 Types of Graphs:
 Directed graph
 Undirected graph
 Simple graph
 Weighted graph
 Connected graph
 Non-connected graph

PM.ppt DATA STRUCTURE USING C WITH EXAMPLE PROGRAMES

More Related Content

Similar to PM.ppt DATA STRUCTURE USING C WITH EXAMPLE PROGRAMES (20)

More from NagarathnaRajur2 (20)

Recently uploaded (20)

PM.ppt DATA STRUCTURE USING C WITH EXAMPLE PROGRAMES