Prabhakar singh ii sem-paper v-detection & measurement of radioactivity

TEJASVI NAVADHITAMASTU
“Let our (the teacher and the taught) learning be radiant”
Let our efforts at learning be luminous and filled with joy, and endowed with the force of purpose
Dr. Prabhakar Singh. D.Phil. Biochemistry
Department of Biochemistry, VBSPU, Jaunpur
DETECTION & MEASUREMENT OF
RADIOACTIVITY

DETECTION & MEASUREMENT OF
RADIOACTIVITY
Various methods for measuring radioactivity
1. Autoradiography
2. Gas ionization detectors
I. Geiger counter
II. Scintillation counter
III. Liquid scintillators
3. Fluorescent scintillation , are the basis to detect & measure
radioactivity in clinical laboratory .

AUTORADIOGRAPHY
• In autoradiography a photo graphic emulsion is used to visualize molecules labeled
with a radioactive element .
• The emulsion consists of a large number of silver halide crystals embedded in a
solid phase such as gelatin .
• As energy from radioactive material dissipated in the emulsion , the silver halide
becomes negatively charged & is reduced to metallic silver.
• Photographic developers are designed to show these silver grains as blackening of
the film , & fixers remove any remaining silver halide .
• Techniques of autoradiography have become more important in molecular biology .
• Weak β – emitting isotopes ( 3H ,14 C ,35 S) are most suitable for autoradiography ,
particularly for cell & tissue localization experiments .
• Low energy of negatrons & short ionizing track of isotope will result in discrete
image .

• β emitting radioisotopes are used when radioactivity associated with subcellular
organelles is being located .
• 3H is the best radioisotope , since it’s all energy will get dissipated in the emulsion .
• Electron microscopy can then be used to locate the image in the developed film .
• For location of DNA bands in electrophoretic gel, 32 P labeled nucleic acid probes are
useful .
• After hybridization ,hydrolysis & separation of DNA fragments by electrophoresis , a
photographic plate is applied to to the covered gel & allowed to incubate .

Choice of emulsion & film
X ray films are generally suitable for macroscopic samples such as whole
body, electrophoretographs , chromatographs .
When light (or) electron microscopic , detection of image ( cellular ,
subcellular localization of radioactivity ) very sensitive films are
necessary .
Time of exposure & film processing depends upon the isotope , sample
type , level of activity , film type & purpose of the experiment.
In Direct autoradiography , the X ray film or emulsion is placed as close
as possible to the sample .

Inert Gas (Principle gas) Bromine Dead time Gaseous Ionization Detector Hance
Geiger and W. Muller- 1928
Principle: Avalanche : Free electron cause electrical conduction by causing more
ionization + ions massive _ Dead time (10-4 s), Secondary electron emitted:
further count wrong: quenching gas = bromine gas
The Geiger counter is an
instrument used for
measuring ionizing
radiation used widely in such
applications as radiation
dosimetry,radiological
protection, experimental
physics and the nuclear
industry.
Geiger Counter

1.The tube contains argon gas at low pressure.
2.The end of the tube is sealed by a mica 'window' thin enough to allow alpha particles
to pass into the tube as well as beta and gamma radiation.
3.When a charged particle or gamma-radiation enters the tube, the argon gas becomes
ionized. This triggers a whole avalanche of ions between the electrodes.
4.For a brief moment, the gas conducts and a pulse of current flows in the circuit.
5.The circuit includes either a scaler or a ratemeter. A scaler counts the pulses and
shows the total on a display.
6.A ratemeter indicates the number of pulses or counts per second. The complete
apparatus is often called a Geiger counter.

Scintillator are material that produces light when ionizing radiation passes
through it. Can be solid liquid and gas. Eg. NaI, CsI etc.
Operation :
1. Absorption of incident radiation raising electron to excited state
2. After subsequent de excitation the scintillator emits a photons in the
visible light range
3. The light emitted from the scintillator interacts with the photot cathods of
a photomultiplier tube releasing the electrons
4. Electron are guided with the help of an electric field toward the first
dynode: dynode is coated with the a substance which emits secondary
electrons
5. Secondary electrons from the first dynode to another dynode and so on
6. Final amplification of about 106 of higher.
Scintillation energy Resolution :
1- large amplification needed because primary signal is low
2- large amplification leads to poor energy resolution
SCINTILLATION COUNTING

LIQUID SCINTILLATION COUNTING
Liquid scintillation counting is the measurement of activity of a
sample of radioactive material which uses the technique of mixing the
active material with a liquid scintillator, and counting the resultant
photon emissions. The purpose is to allow more efficient counting
due to the intimate contact of the activity with the scintillator. It is
generally used for alpha and beta particle detection.
Samples are dissolved or suspended in a "cocktail" containing
a solvent (historically aromatic organics such as benzene or toluene,
but more recently less hazardous solvents are used), typically some
form of a surfactant, and small amounts of other additives known as
"fluors" orscintillators. Scintillators can be divided into primary and
secondary phosphors, differing in their luminescence properties

Liquid scintillation process is the conversion of the energy of a radioactive decay
event into photons of light in a liquid. Photomultipliers (PM-tubes) detect the
emission of light and convert the light pulse into an electrical signal. The intensity of
the light pulse (number of photons emitted) is proportional to the energy of the
radioactive decay event. Further, the size (height) of the electrical pulse is
proportional to the intensity of the light and, accordingly, also proportional to the
energy of the decay event.

The electrical pulse can be handled in an electronic system, which measures
its height and stores the events in an intensity-energy array, a so-called
multichannel analyzer (MCA) system. Thus, an energy spectrum can be
recorded of the decaying radionuclide
In this way liquid scintillation counting (LSC) is a detection technique for
radioactivity. Normally, the radioactive substance is intimately mixed with the
detector which is the liquid scintillator cocktail. The radioactive substance
should then, preferably, be in liquid form.
The emission of light in the liquid scintillator is an isotropic process. By
applying two PM-tubes instead of only one the noise in the detection process
(background counts not due to the decay process) may then be reduced. Only
those events that are recorded in both PM-tubes simultaneously (in
coincidence within the required time window, often 10-30 ns width) are
recorded as “true” counts. A principle sketch of the detection system is given in
the figure above

Prabhakar singh ii sem-paper v-detection & measurement of radioactivity

More Related Content

What's hot (20)

Similar to Prabhakar singh ii sem-paper v-detection & measurement of radioactivity (20)

More from Department of Biochemistry, Veer Bahadur Singh Purvanchal Univarsity, Jaunpur (20)

Recently uploaded (20)