Programming in Python Lists and its methods .ppt

10. Python - Lists
• The list is a most versatile datatype available in Python, which
can be written as a list of comma-separated values (items)
between square brackets. Good thing about a list that items in
a list need not all have the same type:
• Creating a list is as simple as putting different comma-
separated values between squere brackets. For example:
list1 = ['physics', 'chemistry', 1997, 2000];
list2 = [1, 2, 3, 4, 5 ];
list3 = ["a", "b", "c", "d"];
Like string indices, list indices start at 0, and lists can be sliced,
concatenated and so on.

Accessing Values in Lists:
• To access values in lists, use the square brackets for slicing
along with the index or indices to obtain value available at that
index:
• Example:
list2 = [1, 2, 3, 4, 5, 6, 7 ];
print "list1[0]: ", list1[0]
print "list2[1:5]: ", list2[1:5]
• This will produce following result:
list1[0]: physics
list2[1:5]: [2, 3, 4, 5]

Updating Lists:
• You can update single or multiple elements of lists by giving the
slice on the left-hand side of the assignment operator, and you
can add to elements in a list with the append() method:
• Example:
print "Value available at index 2 : "
print list1[2];
list1[2] = 2001;
print "New value available at index 2 : "
print list1[2];
Value available at index 2 :
1997
New value available at index 2 :
2001

Delete List Elements:
• To remove a list element, you can use either the del statement
if you know exactly which element(s) you are deleting or the
remove() method if you do not know.
• Example:
print list1;
del list1[2];
print "After deleting value at index 2 : "
print list1;
['physics', 'chemistry', 1997, 2000]
After deleting value at index 2 :
['physics', 'chemistry', 2000]

Basic List Operations:
• Lists respond to the + and * operators much like strings; they mean
concatenation and repetition here too, except that the result is a new
list, not a string.
• In fact, lists respond to all of the general sequence operations we used
on strings in the prior chapter :
Python Expression Results Description
len([1, 2, 3]) 3 Length
[1, 2, 3] + [4, 5, 6] [1, 2, 3, 4, 5, 6] Concatenation
['Hi!'] * 4 ['Hi!', 'Hi!', 'Hi!', 'Hi!'] Repetition
3 in [1, 2, 3] TRUE Membership
for x in [1, 2, 3]: print x, 1 2 3 Iteration

Indexing, Slicing, and Matrixes:
• Because lists are sequences, indexing and slicing work the same way for
lists as they do for strings.
• Assuming following input:
L = ['spam', 'Spam', 'SPAM!']
L[2] 'SPAM!' Offsets start at zero
L[-2] 'Spam' Negative: count from
the right
L[1:] ['Spam', 'SPAM!'] Slicing fetches sections

Built-in List Functions & Methods:
SN Function with Description
1 cmp(list1, list2)
Compares elements of both lists.
2 len(list)
Gives the total length of the list.
3 max(list)
Returns item from the list with max value.
4 min(list)
Returns item from the list with min value.
5 list(seq)
Converts a tuple into list.

SN Methods with Description
1 list.append(obj)
Appends object obj to list
2 list.count(obj)
Returns count of how many times obj occurs in list
3 list.extend(seq)
Appends the contents of seq to list
4 list.index(obj)
Returns the lowest index in list that obj appears
5 list.insert(index, obj)
Inserts object obj into list at offset index
6 list.pop(obj=list[-1])
Removes and returns last object or obj from list
7 list.remove(obj)
Removes object obj from list
8 list.reverse()
Reverses objects of list in place
9 list.sort([func])
Sorts objects of list, use compare func if given

11. Python - Tuples
• A tuple is a sequence of immutable Python objects. Tuples are sequences,
just like lists. The only difference is that tuples can't be changed ie. tuples
are immutable and tuples use parentheses and lists use square brackets.
• Creating a tuple is as simple as putting different comma-separated values
and optionally you can put these comma-separated values between
parentheses also. For example:
tup1 = ('physics', 'chemistry', 1997, 2000);
tup2 = (1, 2, 3, 4, 5 );
tup3 = "a", "b", "c", "d";
The empty tuple is written as two parentheses containing nothing:
tup1 = ();
To write a tuple containing a single value you have to include a comma, even
though there is only one value:
tup1 = (50,);
• Like string indices, tuple indices start at 0, and tuples can be sliced,
concatenated and so on.

Accessing Values in Tuples:
• To access values in tuple, use the square brackets for slicing
along with the index or indices to obtain value available at that
index:
• Example:
tup1 = ('physics', 'chemistry', 1997, 2000);
tup2 = (1, 2, 3, 4, 5, 6, 7 );
print "tup1[0]: ", tup1[0]
print "tup2[1:5]: “, tup2[1:5]
tup1[0]: physics
tup2[1:5]: [2, 3, 4, 5]

Updating Tuples:
• Tuples are immutable which means you cannot update them or
change values of tuple elements. But we able able to take
portions of an existing tuples to create a new tuples as follows:
• Example:
tup1 = (12, 34.56);
tup2 = ('abc', 'xyz');
tup3 = tup1 + tup2;
print tup3;
This will produce following result:
(12, 34.56, 'abc', 'xyz')

Delete Tuple Elements:
• Removing individual tuple elements is not possible. There is, of
course, nothing wrong with putting together another tuple with
the undesired elements discarded.
• To explicitly remove an entire tuple, just use the del statement:
• Example:
tup = ('physics', 'chemistry', 1997, 2000);
print tup;
del tup;
print "After deleting tup : " print tup;
• This will produce following result.
('physics', 'chemistry', 1997, 2000)
After deleting tup : Traceback (most recent call
last): File "test.py", line 9, in <module> print
tup; NameError: name 'tup' is not defined

Basic Tuples Operations:
• Tuples respond to the + and * operators much like strings; they
mean concatenation and repetition here too, except that the
result is a new tuple, not a string.
• In fact, tuples respond to all of the general sequence
operations we used on strings in the prior chapter :
len((1, 2, 3)) 3 Length
(1, 2, 3) + (4, 5, 6) (1, 2, 3, 4, 5, 6) Concatenation
['Hi!'] * 4 ('Hi!', 'Hi!', 'Hi!', 'Hi!')Repetition
3 in (1, 2, 3) TRUE Membership
for x in (1, 2, 3):
print x,
1 2 3 Iteration

Indexing, Slicing, and Matrixes:
• Because tuples are sequences, indexing and slicing work the
same way for tuples as they do for strings.
• Assuming following input:
L = ('spam', 'Spam', 'SPAM!')
Python
Expression
Results Description
L[2] 'SPAM!' Offsets start at zero
L[-2] 'Spam' Negative: count from the right
L[1:] ['Spam', 'SPAM!'] Slicing fetches sections

No Enclosing Delimiters:
• Any set of multiple objects, comma-separated, written without
identifying symbols, i.e., brackets for lists, parentheses for
tuples, etc., default to tuples, as indicated in these short
examples:
print 'abc', -4.24e93, 18+6.6j, 'xyz';
u, v = 1, 2;
print "Value of u , v : ", u,v;
print var;
• This will reduce following result:
abc -4.24e+93 (18+6.6j) xyz
Value of u , v : 1 2

Built-in Tuple Functions:
SN Function with Description
1 cmp(tuple1, tuple2)
Compares elements of both tuples.
2 len(tuple)
Gives the total length of the tuple.
3 max(tuple)
Returns item from the tuple with max value.
4 min(tuple)
Returns item from the tuple with min value.
5 tuple(seq)
Converts a list into tuple.

Programming in Python Lists and its methods .ppt

More Related Content

Similar to Programming in Python Lists and its methods .ppt (20)

More from Dr. Jasmine Beulah Gnanadurai (20)

Recently uploaded (20)

Programming in Python Lists and its methods .ppt