Consolidating database servers with Lenovo ThinkServer RD630

CONSOLIDATING DATABASE SERVERS WITH
THE LENOVO THINKSERVER RD630

The last time you updated your data center, virtualization allowed you to
consolidate multiple older servers onto newer systems running virtual machines (VMs),
maximizing resource utilization and reducing the number of servers populating your
data center. Now that your business is growing, purchasing new, more powerful servers
can help you consolidate even further.
Since a typical business refreshes their server hardware every four to five years,
we compared the performance of a new Lenovo ThinkServer RD630 to an older HP
ProLiant DL385 G5 to see not only how many of these legacy servers the ThinkServer
RD630 could consolidate, but also how much of a performance increase we could
expect. In the Principled Technologies labs, we found that that a single Lenovo
ThinkServer RD630 was able to consolidate the database workload and outperform
three HP ProLiant DL385 G5 servers by 82.6 percent, while reducing power consumption
by 58.8 percent. Such a consolidation gives you a considerable increase in performance
and has the potential to save data center space, power and cooling, and management
costs.

APRIL 2012
A PRINCIPLED TECHNOLOGIES TEST REPORT
Commissioned by Lenovo

THINK ABOUT A SERVER UPGRADE
Consolidating older servers in your data center is an excellent strategy to bring
savings to your organization. Upgrading to new high-performing servers that can
consolidate many older systems not only saves physical space in your data center, but
can also reduce many costs associated with operating your infrastructure, including
power and cooling costs, maintenance costs, data center port costs, and more.

Consolidate with the Lenovo ThinkServer RD630
Virtualization has become increasingly popular as businesses discovered that
running multiple VMs on a single physical server makes more efficient use of system
resources. IT administrators must ensure the VM and its host server can complete the
workload generated by the business application it hosts, even during usage spikes.
Database applications in particular are typically very intensive in disk I/O and memory
utilization, requiring a powerful server with a powerful storage controller and internal
drives to host more than a couple of database VMs under stress.
To find how many older HP ProLiant DL385 G5 servers running database
application VMs could be consolidated into a single Lenovo ThinkServer RD630, we
created VMs on each server with VMware® vSphere® 5 running a heavy database
workload, and noted how many VMs the servers were able to support. Additionally, we
measured power consumption of the servers and the increase in performance from
each VM on the Lenovo ThinkServer RD630 over the HP ProLiant DL385 G5.
We tested database performance using the DVD Store benchmark with a
Microsoft® SQL Server 2008 R2 database, configuring the workload in each VM to stress
the servers and establish comparable results between the two. The new Lenovo
ThinkServer RD630, powered by the Intel® Xeon® processor E5-2680, supported six VMs
running heavy database application workloads, three times as many as the HP ProLiant
DL385 G5 (see Figure 1). Given that each VM on the Lenovo ThinkServer RD630 was
running a heavy, resource intensive workload, you could expect the ThinkServer RD630
to support many more VMs in your environment depending on the demands of the
applications running on each VM. Thus, a single Lenovo ThinkServer RD630 can handle
the work of three of the older servers while also providing you with significantly higher
performance in each VM, making it an excellent consolidation platform.

Consolidating database servers with A Principled Technologies test report 2
the Lenovo ThinkServer RD630

Number of VMs supported
7
6
Figure 1: A single Lenovo 5
ThinkServer RD630 had the power
to consolidate the database 4

VMs
workloads of three HP ProLiant 3
DL385 G5 servers.
2
1
0
Lenovo ThinkServer RD630 HP ProLiant DL385 G5

Figure 2 compares the database performance of the two servers, with the
Lenovo ThinkServer RD630 demonstrating a staggering 447.7 percent increase in
performance over the HP ProLiant DL385 G5. The DVD Store benchmark reports results
in orders per minute (OPM) the servers could handle, with databases running in six VMs
on the Lenovo ThinkServer RD630 and in two VMs running on the HP ProLiant DL385 G5.

Total database performance
300,000

250,000
Orders per minute

Figure 2: Total database 200,000
performance, in OPM, for the two
servers. 150,000

100,000

50,000

0

Figure 3 shows the average database performance per VM for the two servers.
Each VM on the Lenovo ThinkServer RD630 outperformed the VMs on the HP ProLiant
DL385 G5 by an average of 82.6 percent more OPM.


Average database performance per VM
50,000

40,000

Orders per minute
Figure 3: Average database
30,000
performance, in OPM, per VM for
the two servers.
20,000

10,000

0

Not only do you have the potential to save on power by reducing the number of
servers running in your data center, advances in newer servers allow you to get more
performance at a lower power cost. When looking at the power savings that result from
consolidating three HP ProLiant DL385 G5 servers into one Lenovo ThinkServer RD630,
performance per watt and power per VM allows us to establish a comparison point for
the two servers.
Comparing the two servers using both performance and power consumption,
the Lenovo ThinkServer RD630 delivered 344.1 percent greater performance per watt,
as Figure 4 shows.

Performance per watt
700
(higher numbers are better)
600
Performance per watt

500
Figure 4: Performance per watt for
400
the two servers.
300
200
100
0


As Figure 5 shows, the Lenovo ThinkServer RD630 consumed 58.8 percent less
power per VM than the HP ProLiant DL385 G5.

Power (W) per VM
200
(lower numbers are better)

150

Power (W) per VM
Figure 5: Power, in watts, per VM
for the two servers. 100

50

0

ABOUT THE LENOVO THINKSERVER RD630
Lenovo describes its server as follows: “The all-new Lenovo ThinkServer RD630
mainstream rack server provides powerful new choices to meet your demanding
enterprise needs while offering outstanding value. Supporting two of the latest Intel
Xeon E5-2600 processors, the ThinkServer RD630 can provide outstanding database and
virtualization performance for deployments large or small. Nicely configured, these
servers come standard with Web-based remote management, rail kits, hardware RAID,
and EasyManage tool-suite for unbeatable value. You enjoy enterprise-grade
performance, built-in redundancy, and world-class reliability you expect from the
makers of Think products.”
Below, we highlight some of the Lenovo ThinkServer RD630’s key features.
 Performance and storage capacity. The Intel Xeon processor E5-2600 family has up
to 16 cores, providing a significant performance improvement over previous-
generation processors. Storage choices for the ThinkServer RD630 include up to 16
SATA, SAS and SSD hot-swap drives.
 Reliability. The ThinkServer RD630 comes with redundant power supplies, fans, and
a selection of RAID adapters to prevent data loss.
 Power efficiency. The power-efficient ThinkServer RD630 features the Lenovo
ThinkServer Smart Grid Technology. This feature allows IT administrators the ability
to monitor and intelligently manage power consumption, even making
recommendations for optimal power settings, for a server or group of servers via a
central console. This power management technology helps to reduce energy


consumption and infrastructure costs. Additionally, the ThinkServer RD630 is Energy
Star 1.1 certified and Climate Savers certified.
 Ease of use and manageability. ThinkServers are supported by a suite of
management tools that enables you to easily install, maintain, and manage your
ThinkServer RD630. Systems management based on open standards and protocols
mean easy integration into your existing network.
Lenovo ThinkPlus® Productivity, ThinkPlus Priority Support and available 4-hour
service response further assist you in installation and IT support.
For detailed information about the Lenovo ThinkServer RD630, visit the Lenovo
server site at www.lenovo.com. For details on the specific configuration we tested, see
Appendix A.

WHAT WE FOUND
Figure 6 presents the results of our tests, including the number of VMs the
servers could run, the total database performance in OPM, and the percentage CPU
utilization the servers used to run the workloads. Note that we used a heavy, resource
intensive workload on each VM in order to stress the servers and demonstrate the
higher performance capacity of the Lenovo ThinkServer RD630. Assuming your workload
on each VM is not as intensive, you could expect to run a higher number of VMs in your
environment.

Host server Number of VMs Total OPM Percentage CPU utilization
Lenovo ThinkServer RD630 6 259,989 83.4
HP ProLiant DL385 G5 2 47,467 64.3
Figure 6: Database performance results for the two servers.

Figure 7 presents the power results of our testing. While the ThinkServer RD630
used more power than the HP server did overall, it was running a much larger workload.
This makes the power/VM and performance/watt statistics the more meaningful ones
for comparison. The Lenovo ThinkServer RD630 used 58.8 percent less power per VM
than the HP ProLiant DL385 G5, while simultaneously providing better performance per
VM. The Lenovo ThinkServer RD630 delivered 344.1 percent greater total server
performance per watt.

Host server Power (W) Power/VM (W) Performance/watt
Lenovo ThinkServer RD630 407 68 638.8
HP ProLiant DL385 G5 330 165 143.8
Figure 7: Power, in watts, the two servers used to run the workload.


WHAT WE TESTED
We optimized the virtual hardware configuration for each VM for best
performance using the available resources on each server. We configured the VMs on
the HP ProLiant DL585 G5 with 2GB of memory and three vCPUs, and configured the
VMs on the Lenovo ThinkServer RD630 with 4GB of memory and four vCPUs. In that
way, we were able to create a real-world representation of how these servers would be
utilized while under stress from a database application.
We used the DVD Store version 2.1 (DS2) benchmark to test the database
performance of the servers. We ran DS2 on multiple client machines against each test
server and recorded the power the servers consumed and the OPM they could handle.
For detailed configuration information on the servers we tested, see Appendix
A. For detailed instructions on how we tested, see Appendix B.

About DVD Store Version 2.1
To create our real-world ecommerce workload, we used the DVD Store Version
2.1 benchmarking tool. DS2 models an online DVD store, where customers log in, search
for movies, and make purchases. DS2 reports these actions in orders per minute that
the system could handle, to show what kind of performance you could expect for your
customers. The DS2 workload also performs other actions, such as adding new
customers, to exercise the wide range of database functions you would need to run your
ecommerce environment.

IN CONCLUSION
Populating your data center with new, more powerful and energy efficient
servers can deliver numerous benefits to your organization. By consolidating multiple
older servers onto a new platform, you can save in the areas of data center space and
port costs, management costs, and power and cooling costs.
In our tests, we found that the Lenovo ThinkServer RD630 could consolidate the
workloads of three HP ProLiant DL385 G5 servers, while increasing overall performance
by 82.6 percent and reducing power consumption by 58.8 percent, making the
ThinkServer RD630 an excellent choice to reduce the costs associated with running your
data center.


APPENDIX A – SERVER CONFIGURATION INFORMATION
Figure 8 provides detailed configuration information for the test servers.

System Lenovo ThinkServer RD630 HP ProLiant DL385 G5
Power supplies
Total number 2 2
Vendor and model number Delta Electronics DPS-800RB HP 379124-001
Wattage of each (W) 800 1000
Cooling fans
Total number 6 6
Vendor and model number AVC 2B06038B12G Nidec® B35441-94
Dimensions (h x w) of each 3” x 1-7/8” 2-1/2” x 1-1/2”
Volts 12 12
Amps 2.7 1.5
General
Number of processor packages 2 2
Number of cores per processor 8 4
Number of hardware threads per core 16 1
System power management policy Balanced Balanced
CPU
Vendor Intel AMD
Name Xeon Opteron™
Model number E5-2680 2356
Stepping C1 B3
Socket type 2011 LGA F - 1207
Core frequency (GHz) 2.70 2.30
L1 cache 32 KB (per core) 64 KB
L2 cache 256 KB (per core) 512 KB (per core)
L3 cache 20 MB (shared) 2 MB (shared)
Platform
Vendor and model number Lenovo ThinkServer RD630 HP ProLiant DL385 G5
American Megatrend Inc. 2.14
BIOS name and version HP BIOS A09 (05/02/2011)
Lenovo BIOS 0.21
BIOS settings Default Default
Memory module(s)
Total RAM in system (GB) 160 8
Vendor and model number Samsung® M393B1K70CH0-CH9 Qimonda® HYS72T512220EP
Type PC3-10600R DDR3 PC2-5300P
Speed (MHz) 1,333 667
Speed running in the system (MHz) 1,333 667
Timing/Latency (tCL-tRCD-tRP-
9-9-9-24 5-5-5-15
tRASmin)
Size (GB) 8 4
Number of RAM module(s) 20 2


Chip organization Double-sided Double-sided
Rank Dual Dual
Operating system (host)
Name VMware ESXi 5 VMware ESXi 5
Build number 5.0.0 5.0.0
Operating system (virtualized)
Name Windows Server 2008 R2 Windows Server 2008 R2
Build number 7601 7601
Service pack SP1 SP1
File system NTFS NTFS
Kernel ACPI x64-based PC ACPI x64-based PC
Language English English
RAID controller
Vendor and model number LSI™ MegaRaid® SAS 9260-8i HP Smart Array P400 Controller
Firmware version 2.120.183-1415 7.22
Cache size (MB) 512 512
Hard drives #1
Vendor and model number Seagate® ST9600204SS HP MBF2300RC
Number of drives 2 8
Size (GB) 600 300
RPM 10,000 10,000
Type SAS SAS 6.0 Gb/s
Hard drives #2
Vendor and model number STEC® M16ISD2-200UCP N/A
Number of drives 4 N/A
Size (GB) 200 N/A
Type SATA/SSD 300 Gb/s N/A
Ethernet adapters
First network adapter
Vendor and model number Intel I350 HP NC373i Gigabit Server Adapter
Type Integrated Integrated
Second network adapter
Vendor and model number Intel I350 HP NC373i Gigabit Server Adapter
Type Integrated Integrated
Third network adapter
Vendor and model number Intel 82574L N/A
Type Integrated N/A
Optical drive(s)
Vendor and model number HL-DT-ST CD-ROM HL-DT-ST CD-ROM
Type SATA SATA


USB ports
Number 7 5
Type 2.0 2.0
Figure 8: System configuration information for the test servers.


APPENDIX B - HOW WE TESTED
Setting up the servers – VMware vSphere 5.0
Configuring partitions on the servers
Boot the server and enter RAID controller configuration when prompted (F8 for HP and CTRL+H for
Lenovo).Following the setup wizard, we configured two drives in a RAID 1 configuration for one partition and six in a
RAID 10 for a second partition for the HP ProLiant DL585 G5. For the Lenovo ThinkServer RD630, we assigned the 600GB
SAS drives in a RAID 1 configuration for one partition and the 4 SSD drives in a RAID10 configuration for the second
partition.
Installing VMware vSphere 5.0 (ESXi) on the servers
1. Insert the disk, and select Boot from disk.
1. On the Welcome screen, press Enter.
2. On the End User License Agreement (EULA) screen, press F11.
3. On the Select a Disk to Install or Upgrade Screen, select the relevant volume to install ESXi on and press Enter.
(We choose to install to internal USB devices.)
4. On the Please Select a Keyboard Layout screen, press Enter.
5. On the Enter a Root Password Screen, assign a root password and confirm it by entering it again. Press Enter to
continue.
6. On the Confirm Install Screen, press F11 to install.
7. On the Installation complete screen, press Enter to reboot.
Configuring ESXi after Installation
1. On the 5.0.0 ESXi screen, press F2, enter the root password, and press Enter.
2. On the System Customization screen, select Troubleshooting Options, and press Enter.
3. On the Troubleshooting Mode Options screen, select enable ESXi Shell, and press Enter.
4. Select Enable SSH, press Enter, and press ESC.
5. On the System Customization screen, select Configure Management Network.
6. On the Configure Management Network screen, select IP Configuration.
7. On the IP Configuration screen, select set static IP, enter an IP address, subnet mask, and default gateway, and
press Enter.
8. On the Configure Management Network screen, press Esc. When asked if you want to apply the changes, press
Y.
Configuring VM networking on ESXi
1. Using the vSphere client from another machine, connect to the ESXi server.
2. Add the necessary vSwitch for the network that DVD Store traffic will use:
a. Click the host, click the Configuration tab, and click Networking.
b. Click Add Networking.
c. Choose Virtual Machine, and click Next.
d. Choose create a vSphere standard switch.
e. Choose the NIC associated with VM traffic.
f. Assign the network label and assign IP settings.
g. Click Finish.


Configuring VMware datastores on the servers
We created datastores on HP ProLiant DL385 G5 and the Lenovo ThinkServer RD630 using the parameters in
Figure 9, following the steps below.
Host Datastore name
HP ProLiant DL385 G5 Datastore
HP ProLiant DL385 G5 extra_6_disk_raid10
Lenovo ThinkServer RD630 DatastoreLenovo
Lenovo ThinkServer RD630 4_disks_SSD_raid10
Figure 9: Datastore parameters for the servers we tested.

1. Using the vSphere client, select HomeDatastore and Datastore Clusters.
2. Right-click Cluster and select Add new Datastore.
3. Select the appropriate host, and click Next.
4. Leave default Storage type as Disk/LUN, and click Next.
5. Select the desired Disk/LUN, and click Next.
6. Select VMFS-5, and click Next.
7. Click Next.
8. Enter corresponding datastore name from above, and click Next.
9. Keep default capacity of Maximum available space, and click Next.
10. Click Finish.
11. Repeat all steps above to create the remaining datastores using the partitions you created above in the
Configuring partitions section.
Creating the first VM
We created the first virtual machine for each platform using the parameters in Figures 10 and 11 and following
the steps below.
Basic VM settings
HP ProLiant DL385 G5
Memory (GB) 2
CPUs 3
Lenovo ThinkServer RD630
Memory (GB) 4
CPUs 4
Figure 10: Basic VM settings for the servers.

Datastore Size (GB) Node Provisioning
HP VM virtual disk settings
Hard Disk 1 datastore 40 0:0 Thick, Lazy Zeroed
Hard Disk 2 extra_6_disk_raid10 20 1:0 Thick, Lazy Zeroed
Hard Disk 3 datastore 15 1:1 Thick, Lazy Zeroed
Hard Disk 4 extra_6_disk_raid10 2 1:2 Thick, Lazy Zeroed
Lenovo VM virtual disk settings
Hard Disk 1 datastorelenovo 20 0:0 Thick, Lazy Zeroed
Hard Disk 2 4_disks_SSD_raid10 10 0:1 Thick, Lazy Zeroed


Datastore Size (GB) Node Provisioning
Hard Disk 3 4_disks_SSD_raid10 2 0:3 Thick, Lazy Zeroed
Hard Disk 4 datastorelenovo 15 0:4 Thin
Figure 11: Virtual disk settings for the servers.

1. In the vSphere client, connect to the vCenter Server, and browse to the ESXi host.
2. Click the Virtual Machines tab.
3. Right-click, and choose New Virtual Machine.
4. Choose Custom, and click Next.
5. Assign a name to the virtual machine, and click Next.
6. Select the corresponding OS Datastore, and click Next.
7. Choose Virtual Machine Version 8, and click Next.
8. Choose Windows, choose Microsoft Windows Server 2008 R2 (64-bit), and click Next.
9. Choose the preferred system number of virtual processors from Figure 9, and click Next.
10. Choose the appropriate amount of memory listed in Figure 9, and click Next.
11. Click 1 for the number of NICs, select vmnicX, and click Next.
12. Leave the default virtual storage controller, and click Next.
13. Choose to create a new virtual disk, and click Next.
14. Reference Figure 10 to assign OS virtual disk parameters, (e.g., 40 GB, thick-provisioned lazy zeroed), specify the
OS datastore, and click Next.
15. Keep the default virtual device node (0:0), and click Next.
16. Click Finish.
17. Right-click the VM, and choose Edit Settings.
18. On the Hardware tab, click Add…
19. Click Hard Disk, and click Next.
20. Click Create a new virtual disk, and click Next.
21. Reference Figure 10 for the appropriate virtual disk size, choose thick-provisioned lazy zeroed, and specify the
datastore for backup and SQL Server data usage.
22. Choose SCSI(0:1) for the device node, and click Next.
datastore for backup and SQL Server data usage (storage pool 2).
datastore for SQL Server log virtual disks.
33. Click SCSI Controller 1, and choose Change Type.
34. Choose VMware Paravirtual, and click OK.
35. Click Finish, and click OK.
36. Start the VM.
37. Attach the Windows Server 2008 R2 SP1 ISO image to the VM, and install Windows Server 2008 R2 on your VM.


Configuring the VMs
See the above sections regarding the initial creation of the virtual machines on each hypervisor. We provide
steps below for installing the operating system, Microsoft SQL Server, and configurations of the VMs.
Installing the VM operating system on the first VM
1. Insert the installation DVD for Windows Server 2008 R2 SP1 Enterprise into the DVD drive, and attach the
physical DVD drive to the VM. Alternatively, use an ISO image and connect to the ISO image from the VM
console.
2. Open the VM console on vSphere.
3. At the Language Selection Screen, click Next.
4. Click Install Now.
5. Select Windows Server 2008 R2 Enterprise (Full Installation), and click Next.
6. Click the I accept the license terms check box, and click Next.
7. Click Custom.
8. Click Next.
9. At the User’s password must be changed before logging on warning screen, click OK.
10. Enter the desired password for the administrator in both fields, and click the arrow to continue.
11. At the Your password has been changed screen, click OK.
12. Install the latest VMware Tools package on the VM. Restart as necessary.
13. Connect the machine to the Internet, and install all available Windows updates. Restart as necessary.
14. Enable remote desktop access.
15. Change the hostname and reboot when prompted.
16. Create a shared folder to store test script files. Set permissions as needed.
17. Set up networking:
a. Click StartControl Panel, right-click Network Connections, and choose Open.
b. Right-click the VM traffic NIC, and choose Properties.
c. Select TCP/IP (v4), and choose Properties.
d. Set the IP address, subnet, gateway, and DNS server for the virtual NIC, which will handle outgoing server
traffic. Click OK, and click Close.
18. In the VM, configure the VM storage:
a. Click the Server Manager icon in the taskbar.
b. In the left pane, expand Storage and click Disk Management.
c. Right-click the first volume and choose Initialize Disk.
d. In the right pane, right-click the volume and choose New Simple Volume...
e. At the welcome window, click Next.
f. At the Specify Volume Size window, leave the default selection, and click Next.
g. At the Assign Drive Letter or Path window, choose a drive letter, and click Next.
h. At the Format Partition window, choose NTFS and 64K allocation unit size, and click Next.
i. At the Completing the New Simple Volume Wizard window, click Finish.
j. Repeat steps c through i for the remaining VM volumes.
19. Copy the pre-created DVD Store backup file to the backup virtual disk inside the first VM.
Installing SQL Server 2008 R2 SP1 on the first VM
1. Open the vSphere console for the VM.
2. Log into the virtual machine.
3. Insert the installation DVD for SQL Server 2008 R2 into the vSphere host server’s DVD drive.
4. Attach the physical DVD drive to the VM.


5. Click Run SETUP.EXE. If Autoplay does not begin the installation, navigate to the SQL Server 2008 R2 DVD, and
double-click.
6. If the installer prompts you with a .NET installation prompt, click Yes to enable the .NET Framework Core role.
7. In the left pane, click Installation.
8. Click New installation or add features to an existing installation.
9. At the Setup Support Rules screen, wait for the check to complete. If there are no failures or relevant warnings,
click OK.
10. Select the Enter the product key radio button, and enter the product key. Click Next.
11. Click the checkbox to accept the license terms, and click Next.
12. Click Install to install the setup support files.
13. If there are no failures displayed, click Next. You may see a Computer domain controller warning and a Windows
Firewall warning. For now, ignore these.
14. At the Setup Role screen, choose SQL Server Feature Installation.
15. At the Feature Selection screen, select Database Engine Services, Full-Text Search, Client Tools Connectivity,
Client Tools Backwards Compatibility, Management Tools –Basic, and Management Tools – Complete. Click Next.
16. At the Installation Rules screen, click Next once the check completes.
17. At the Instance configuration screen, leave the default selection of default instance, and click Next.
18. At the Disk space requirements screen, click Next.
19. At the Server configuration screen, choose NT AUTHORITYSYSTEM for SQL Server Agent, and choose NT
AUTHORITYSYSTEM for SQL Server Database Engine. Click Next.
20. At the Database Engine Configuration screen, select Mixed Mode.
21. Enter and confirm a password for the system administrator account.
22. Click Add Current user. This may take several seconds.
23. Click Next.
24. At the Error and usage reporting screen, click Next.
25. At the Installation Configuration rules screen, check that there are no failures or relevant warnings, and click
Next.
26. At the Ready to Install screen, click Install.
27. After installation completes, click Next.
28. Click Close.
29. Create a SQL Server login for the ds2user.
30. Copy the pre-created DVD Store backup to the specified backup VHD volume.
31. Click StartAll ProgramsMicrosoft SQL Server 2008 R2Configuration Tools, and click SQL Server
Configuration Manager
32. Expand SQL Server Network Configuration, and click Protocols for MSSQLSERVER.
33. Right-click TCP/IP, and select Enable.
34. Download and install Microsoft SQL Server 2008 R2 SP1.
Configuring additional VMs on vSphere
1. Log into the vCenter Server, which manages the host.
1. Right-click the first VM, and choose Clone.
2. Name the new VM.
3. Choose the cluster, and select the host.
4. For the storage screen, choose advanced and direct the new virtual disks to the applicable datastores. Choose to
customize using the customization wizard. Save the clone details as a new customization specification.
5. Continue cloning each VM, modifying the customization specification as necessary for IP addressing and so on.
6. Ensure in each VM that the necessary virtual disks are all online, the hostname is renamed, and the IP
addressing was properly assigned by the customization wizard.


7. Modify the SQL Server hostname of each VM using the instructions provided by Microsoft
(http://msdn.microsoft.com/en-us/library/ms143799.aspx ).
8. To configure automatic start for your specified number of VMs, click the Host configuration tab in the vSphere
client, and click Virtual Machine Startup/Shutdown.
Configuring the database (DVD Store)
We generated the data using the Install.pl script included with DVD Store version 2.1 (DS2), providing the
parameters for our 4GB database size and the database platform on which we ran: Microsoft SQL Server. We ran the
Install.pl script on a utility system running Linux. The database schema was also generated by the Install.pl script.
After processing the data generation, we transferred the data files and schema creation files to a Windows-
based system running SQL Server 2008 R2. We built the 4GB database in SQL Server 2008 R2, and then performed a full
backup, storing the backup file on the C: drive for quick access. We used that backup file to restore on both servers
between test runs. We performed this procedure once, and used the same backup file for all virtual machines.
The only modification we made to the schema creation scripts were the specified file sizes for our database. We
explicitly set the file sizes higher than necessary to ensure that no file-growth activity would affect the outputs of the
test. Besides this file size modification, the database schema was created and loaded according to the DVD Store
documentation. Specifically, we followed the steps below:
1. We generated the data and created the database and file structure using database creation scripts in the DS2
download. We made size modifications specific to our 4GB database and the appropriate changes to drive
letters.
2. We transferred the files from our Linux data generation system to a Windows system running SQL Server.
3. We created database tables, stored procedures, and objects using the provided DVD Store scripts.
4. We set the database recovery model to bulk-logged to prevent excess logging.
5. We loaded the data we generated into the database. For data loading, we used the import wizard in SQL Server
Management Studio. Where necessary, we retained options from the original scripts, such as Enable Identity
Insert.
6. We created indices, full-text catalogs, primary keys, and foreign keys using the database-creation scripts.
7. We updated statistics on each table according to database-creation scripts, which sample 18 percent of the
table data.
8. On the SQL Server instance, we created a ds2user SQL Server login using the following Transact SQL (TSQL)
script:

USE [master]
GO
CREATE LOGIN [ds2user] WITH PASSWORD=N’’,
DEFAULT_DATABASE=[master],
DEFAULT_LANGUAGE=[us_english],
CHECK_EXPIRATION=OFF,
CHECK_POLICY=OFF
GO
9. We set the database recovery model back to full.
10. We created the necessary full text index using SQL Server Management Studio.
11. We created a database user and mapped this user to the SQL Server login.


12. We then performed a full backup of the database. This backup allowed us to restore the databases to a pristine
state relatively quickly between tests.
Figure 12 details our initial file size modifications.
Logical name Filegroup Initial size (MB)
Database files
primary PRIMARY 3
cust1 DS_CUST_FG 2,048
cust2 DS_CUST_FG 2,048
ind1 DS_IND_FG 1,024
ind2 DS_IND_FG 1,024
ds_misc DS_MISC_FG 1,024
orders1 DS_ORDERS 1,024
orders2 DS_ORDERS 1,024
Log files
ds_log Not Applicable 10,240
Figure 12: The file size modifications we used in our testing.

Running the DVD Store tests
We created a series of batch files, SQL scripts, and shell scripts to automate the complete test cycle. DVD Store
outputs an orders-per-minute metric, which is a running average calculated through the test. In this report, we report
the last OPM reported by each client/target pair.
Each complete test cycle consisted of the general steps listed below. For each scenario, we ran three test cycles,
and chose the median outcome.
1. Clean up prior outputs from the host system and all client driver systems.
2. Drop all databases from all target VMs.
3. Restore all databases on all target VMs.
4. Shut down all VMs.
5. Reboot the host system and all client systems.
6. Wait for a ping response from the server under test (the hypervisor system), all client systems, and all VMs.
7. Let the test server idle for one hour.
8. Start the DVD Store driver on all respective clients.
We used the following DVD Store parameters for testing the virtual machines in this study:

ds2sqlserverdriver.exe --target=<target_IP> --ramp_rate=10 --run_time=45 --
n_threads=10 --db_size=4GB --think_time=0.1 > C:outputresultsfile.txt


ABOUT PRINCIPLED TECHNOLOGIES
We provide industry-leading technology assessment and fact-based marketing
services. We bring to every assignment extensive experience with and expertise
in all aspects of technology testing and analysis, from researching new
technologies, to developing new methodologies, to testing with existing and new
tools.
Principled Technologies, Inc.
1007 Slater Road, Suite 300 When the assessment is complete, we know how to present the results to a
Durham, NC, 27703
www.principledtechnologies.com broad range of target audiences. We provide our clients with the materials they
need, from market-focused data to use in their own collateral to custom sales
aids, such as test reports, performance assessments, and white papers. Every
document reflects the results of our trusted independent analysis.

We provide customized services that focus on our clients’ individual
requirements. Whether the technology involves hardware, software, Web sites,
or services, we offer the experience, expertise, and tools to help our clients
assess how it will fare against its competition, its performance, its market
readiness, and its quality and reliability.

Our founders, Mark L. Van Name and Bill Catchings, have worked together in
technology assessment for over 20 years. As journalists, they published over a
thousand articles on a wide array of technology subjects. They created and led
the Ziff-Davis Benchmark Operation, which developed such industry-standard
benchmarks as Ziff Davis Media’s Winstone and WebBench. They founded and
led eTesting Labs, and after the acquisition of that company by Lionbridge
Technologies were the head and CTO of VeriTest.

Principled Technologies is a registered trademark of Principled Technologies, Inc.
All other product names are the trademarks of their respective owners.

Disclaimer of Warranties; Limitation of Liability:
PRINCIPLED TECHNOLOGIES, INC. HAS MADE REASONABLE EFFORTS TO ENSURE THE ACCURACY AND VALIDITY OF ITS TESTING, HOWEVER,
PRINCIPLED TECHNOLOGIES, INC. SPECIFICALLY DISCLAIMS ANY WARRANTY, EXPRESSED OR IMPLIED, RELATING TO THE TEST RESULTS AND
ANALYSIS, THEIR ACCURACY, COMPLETENESS OR QUALITY, INCLUDING ANY IMPLIED WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE.
ALL PERSONS OR ENTITIES RELYING ON THE RESULTS OF ANY TESTING DO SO AT THEIR OWN RISK, AND AGREE THAT PRINCIPLED
TECHNOLOGIES, INC., ITS EMPLOYEES AND ITS SUBCONTRACTORS SHALL HAVE NO LIABILITY WHATSOEVER FROM ANY CLAIM OF LOSS OR
DAMAGE ON ACCOUNT OF ANY ALLEGED ERROR OR DEFECT IN ANY TESTING PROCEDURE OR RESULT.

IN NO EVENT SHALL PRINCIPLED TECHNOLOGIES, INC. BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES IN
CONNECTION WITH ITS TESTING, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL PRINCIPLED TECHNOLOGIES,
INC.’S LIABILITY, INCLUDING FOR DIRECT DAMAGES, EXCEED THE AMOUNTS PAID IN CONNECTION WITH PRINCIPLED TECHNOLOGIES, INC.’S
TESTING. CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES ARE AS SET FORTH HEREIN.


Consolidating database servers with Lenovo ThinkServer RD630

More Related Content

What's hot (20)

Similar to Consolidating database servers with Lenovo ThinkServer RD630 (20)

More from Principled Technologies (20)

Consolidating database servers with Lenovo ThinkServer RD630