Risc processors
- 2. CONTENTS Introduction History RISC versus CISC RISC Design Principles Examples for RISC Processors Pipelining Modern Day Advancement References
- 3. INTRODUCTION Two basic types of processor design philosophies : CISC and RISC CISC – Complex Instruction Set Computer RISC- Reduced Instruction Set Computer The difference between RISC and CISC can lays on many levels, lots of plausible arguments are put forward by both side. Such as code density, transistor counts, memory bottlenecks, compiler and decode complexity etc.
- 4. HISTORY The IBM 360 system, created in 1964, was probably the first modern processor system. From that CISC microprocessors became prevalent, each successive processor having more and more complicated hardware and more and more complex instruction sets. In the middle of 70's with more and more complex instructions sets, decoding and execution of such instructions were complicated and time-consuming, finally which affects the performance.
- 5. RISC chips were evolved in 70’s. John Cocke at IBM's T.J Watson Research centre provided the fundamental concepts of RISC. The idea came from the IBM 801minicomputer built in 1971 which is used as a fast controller in a very large telephone switching system.
- 6. RISC versus CISC 1. Multiple clock cycle 1. Single clock cycle 2. Any instructions may refer memory. 2. Only LOAD/STORE refer memory. 3. Not pipelined or less pipelined 3. Highly pipelined 4. Instructions interpreted by the micro program. 4. Instructions executed by the hardware. 5. Variable format instructions 5. Fixed format instruction 6. Many instructions and modes 6. Few instructions and modes 7. Complexity in micro program 7. Complexity in the compiler 8. Single register set 8. Multiple register set CISC RISC
- 7. Multiplying two Numbers in Memory
- 8. The CISC Approach Multiplying two numbers can be completed with one instruction: MULT 2:3, 5:2 It operates directly on the computer's memory banks and does not require the programmer to explicitly call any loading or storing functions. Advantages: Compiler has to do very little work to translate a high-level language statement into assembly. Because length of the code is short, very little RAM is required to store instructions.
- 9. The RISC Approach Thus, the "MULT" command described above could be divided into three separate commands: LOAD A, 2:3 LOAD B, 5:2 PROD A, B STORE 2:3, A LOAD - move data from the memory bank to a register. PROD - finds the product of two operands located within the registers. STORE - moves data from a register to the memory banks. Requires only one clock cycle to execute one instruction. Require less transistors of hardware space but leaving more room for general purpose registers.
- 10. RISC Design Principles 1. Simple Instructions: The objective is to design simple instruction so that each can execute in one cycle. 2. Register-to-Register operations: RISC processors only allow LOAD/STORE operations to access memory. Rest of the operations work on the register-to-register basis. This feature of restricting operands to registers also simplifies the control unit.
- 11. 3. Simple Addressing modes: RISC processors employ register-to-register instruction so most instruction use register based addressing. Only LOAD/STORE instructions need memory addressing modes. 4. Large Register Set: For register-to-register operation large number of registers required. Provide ample opportunities for the compiler to optimize their usage.
- 12. With large register set can minimize overhead associated with the procedure calls and returns. To speed up procedure calls, we can use registers to store local variables as well as passing arguments. 5. Fixed-Length: RISC design use fixed-length instructions. Variable length instructions cause implementation and execution inefficient. The boundaries of various fields in an instruction such as opcode and source operands are fixed. This allows efficient decoding and scheduling of instructions.
- 13. Examples for RISC Architectures MIPS (Million Instructions Per Second) Dominant in embedded applications including digital cameras, digital tv’s, sony playstaion2, network routers and so on. SPARC (Scalable Processor ARChitecture) 1987 – SPARC version 7, 32-bit processor. 1990 – SPARC version 8, 32–bit. 1993 – SPARC version 9, 64-bit.
- 14. POWER PC Developed by IBM, MOTOROLA, APPLE 64bit architecture can use in two modes : 64bit/ 32bit. It supports dynamic switching between these two modes. ITANIUM Developed by INTEL. Based on EPIC (Explicit Parallel Instruction Computing) design philosophy ARM(Advanced RISC Machines) Cost – sensitive embedded applications modems, mobile phones, pagers and most DSP instructions.
- 15. Pipelining A RISC processor pipeline operates in much the same way, although the stages in the pipeline are different. While different processors have different numbers of steps, they are basically variations of these five, used in the MIPS R3000 processor: Fetch instructions from memory Read registers and decode the instruction Execute the instruction or calculate an address Access an operand in data memory Write the result into a register
- 16. Modern Day Advancement NISC PROCESSORS Further advancement of compiler and memory technologies leads to emerging VLIW processors. NISC is a successor of VLIW processors. In NISC, the compiler has both horizontal and vertical control of the operations in the datapath. Therefore, the hardware is much simpler. No instruction set computing (NISC). NISC is a statically- scheduled horizontal nanocoded architecture (SSHNA). The term "statically scheduled" means, operation scheduling and hazard handling are done by a compiler. The term "horizontal nanocoded" means that NISC does not have any predefined instruction set or microcode.
- 17. References http://cse.stanford.edu/class/sophomore-college/projects-00/risc/ http://www.visionengineer.com/comp/why_cisc.shtml http://www.visionengineer.com/comp/why_risc.shtml http://www.embedded.com/story/OEG20030205S0025 http://encyclopedia.laborlawtalk.com/PowerPC http://www.sunderland.ac.uk/~ts0jti/comparch/ciscrisc.htm http://www.heyrick.co.uk/assembler/riscvcisc.html http://www.aallison.com/history.htm