Rotronic Data Sheet HygroFlex8 Industrial Transmitter
0 likes45 views
The Hygroflex8 transmitters utilize advanced airchip3000 digital technology for precise humidity and temperature measurements, offering an accuracy of 0.8 %rh and <0.1 °c. Key features include maintenance-free sensors, hot swap calibration, data logging, and multiple output options, making these devices highly reliable and versatile for industrial applications. With a broad operational range and robust design, they are suitable for various demanding environments.
Rotronic Data Sheet HygroFlex8 Industrial Transmitter
- 1. TRANSMITTERS FOR HUMIDITY AND TEMPERATURE THE UNIVERSAL INDUSTRIAL TRANSMITTER. BASED ON THE AIRCHIP3000 DIGITAL TECHNOLOGY. INNOVATION IN HUMIDITY AND TEMPERATURE MEASUREMENT
- 2. SPECIFY THE BEST: HYGROFLEX8 ADVANTAGES AT A GLANCE. Problem-free, accurate humidity measurement results from the most stable sensor in the industry combined with our unique HygroClip® digital probe technology, designed to practically eliminate any maintenance downtime. When it is time for a scheduled calibration ‘hot swap’ in seconds with a calibrated probe without loss of measurement accuracy. HygroFlex8 transmitters provide superb precision and state-of-the-art functionality, taking humidity and temperature measurement to a whole new level of performance and reliability (0.8 %RH and <0.1 °C accuracy). Optional display r r r r r AirChip3000 Digital Technology - The latest generation of ROTRONIC probes and instruments use the AirChip3000 technology with features such as: r r r r r r Data logging function r r r r Relay output r r r Alarm function r r r Output signals r r r r Flexible choice of probes r r r r r
- 3. 15 120/280/430/580 39 15 103 51.5 25 39 10 8060 12 11 SW 27 15 103 1 2 „ G / NTP APPLICATIONS. PROBES FOR HYGROFLEX TRANSMITTERS.
- 4. TECHNICAL INFORMATION. Analog Probe Input Data Logging. Sensor Diagnostics. Factory Adjustment. 102 192 85 52 Dimension Device type Humidity temperature transmitter with analog output signals relay outputs Optional digital interface: Ethernet, RS-485 Circuit type 3-wire Number of probe inputs 2 (digital or analog) Digital probe HygroClip2 probe Analog probe (12-bit AD converter) Supply voltage to probe: 5 VDC Maximum PROBE SIGNAL RANGE TO 6# #ONkGURABLE MEASURING RANGE and measurement unit Probe type All HC2 probes (digital) Accuracy at 23 ±5 °C ±0.8 %RH / 0.1 C (typically value), probe dependent Measurement range -100…200 °C / 0…100 %RH, probe dependent Psychrometric calculations Dew point (Dp) above and below freezing Frost point (Fp) below freezing and dew point above freezing Wet bulb temperature (Tw) , Enthalpy (H) 6APOR CONCENTRATION $V
- 5. 3PECIkC HUMIDITY 1 Mixing ratio by weight (R), Vapor concentration at saturation (Dvs) Vapor partial pressure (E), Vapor saturation pressure (Ew) Start-up time 1.9 s (typical) Data refresh rate 1 s (typical) Supply voltage HF83x 15…40 VDC or 12…28 VAC, 50-60 Hz Supply voltage HF84x 9-36 VDC, with galvanic isolation Supply voltage HF86x 85…265 VAC, 5 Watt, 50-60 Hz with galvanic isolation Analogue output 1, 2, 3 and 4 Analogue output signals, scalable by user 0…20 mA 4… 20 mA 0… 1 V 0… 5 V 0… 10 V Interface options RS-485 and analogue output Ethernet (wired) Relay 1, 2, 3 and 4 Can be made to correspond to any parameter and probe Parameter, Operation 5SER CONkGURABLE WITH THE 2/42/.)# (7 SOFTWARE Relay type SPDT (single pole double throw) Maximum switching voltage: 250VAC* Maximum switching current: 6A* (*resistive load) Optional display LC, 1 or 2 decimals resolution backlight, trend and alarm indication Housing material / Weight ABS / 540 g (1 lb 3 oz) – depends on model Housing protection grade IP 65 (except models with USB or Ethernet interface) Storage and transit -50…+70 °C / -20...+70 °C (models with display) 0…100 %RH, non condensing Operating limits at electronics -40… +85 °C / -10….60 °C (models with display) 0…100 %RH, non condensing Temperature limits at probe Depends on probe model Maximum humidity at sensor 100 %RH up to 80 °C(176 °F) 75 %RH at 100 °C(212 °F) 45 %RH at 125 °C(260 °F 15 %RH at 150 °C(302 °F) CE / EMC immunity EMC compliant 2014/30/EU: EN 61000-6-1:2007, EN 61000-6-2:2005 EN 61000-6-3:2007+A1:2011+A2:2012, EN 61000-6-4:2007+A1:2011, EN 50581:2012 Solder type Lead free (RoHS directive) Fire protection class Corresponds to UL94-HB FDA / GAMP directives Compatible 2/42/.)#!'
- 8. 4EL
- 10. #ROMPTON IELDS
- 11. #ROMPTON 7AY
- 12. #RAWLEY
- 13. 7EST 3USSEX
- 14. 2( %%
- 15. 5+
- 16. 0HONE
- 18. %NGINEERS 2OAD
- 19. (AUPPAUGE
- 20. .9
- 21. 53!
- 22. 0HONE
- 24. 0RITCHARD 2D
- 25. 5NIT
- 26. (AMILTON
- 27. /.
- 28. #ANADA
- 29. ,7 0
- 30. 0HONE
- 33. # )NNO #ENTRE
- 34. 3INGAPORE
- 35. 0HONE
- 36. WWWROTRONICSG