OPTICAL ENERGY TECHNOLOGIES INC. www.opticalenergy.com 
472 WESTOVER ROAD, STAMFORD CT. 06902 
TEL: 203-357-0626 FAX: 203-348-8761 email: gfalbel@optonline.net 
PROPRIETARY DESIGN 
A 
EPDM RUBBER TUBING MAT STRIPS AND REFLECTIVE 
FILM, PRESSED AGAINST REAR SOLAR PANEL GLASS 
CONDUCTS HEAT ENERGY TO DOMESTIC HOT WATER TANK 
AND IMPROVES PHOTOELECTRIC OUTPUT EFFICIENCY 
ONE, 330 WATT SUNPREME 
FRAMELESS SOLAR PANEL 
(OUTPUT 380 WATTS) 
1/2" PLYWOOD BACKING (PAINTED) 
SECTION A-A DETAIL SCALE: 4/1 
SOLAR PANEL REAR GLASS 
PVC MANIFOLD 
SOLAR CELL 
A 
FIGURE 1 RURAL ELECTRICITY/WATER HEATING SYSTEM 
PROPRIETARY DESIGN DATA
OPTICAL ENERGY TECHNOLOGIES INC. www.opticalenergy.com 
472 WESTOVER ROAD, STAMFORD CT. 06902 
TEL: 203-357-0626 FAX: 203-348-8761 email: gfalbel@optonline.net 
RURAL COMBINED ELECTRICITY/ DOMESTIC WATER HEATING 
SYSTEM 
As is shown in Figure 1 above, a single 1 X 2 meter2 panel combines 
photoelectric electrical energy generation with domestic hot water preheating. 
The Sunpreme panel, shown in Figure 2, when backed with a reflective film 
generates 380 watts in full sun at its rated temperature of 25°C. If it were 
mounted in the conventional way using racks, it would heat up to 45°C reducing 
its electrical output by 15%. But by cooling it with water beginning at sunrise, 
when the water is at 10°C, the average panel temperature will be only 27.5°C. At 
sunset, the water temperature will be at or above 45°C, suitable for washing or 
pre-heated for cooking. 
The 50 volt output of the panel is reduced by a voltage regulator to 14 volts and 
can be used to charge a standard 12 volt battery to provide light, and/or radio-TV 
after sunset. Water can be circulated through the rubber tube strips without a 
pump by mounting a small water tank above the panel so that the heated water 
circulates by gravity-thermo-syphonation. 
The price of this system is broken down as follows: 
· 1 x 2 meter2 hybrid PV/SOLAR THERMAL PANEL $895- 
· 12 VOLT DC. PUMP $150- 
· SOLAR PANEL-12 VOLT BATTERY VOLTAGE REGULATOR $150- 
ALL PRICES ARE IN US DOLLARS F.O.B. STAMFORD CT USA 
PROPRIETARY DESIGN DATA
OPTICAL ENERGY TECHNOLOGIES INC. www.opticalenergy.com 
472 WESTOVER ROAD, STAMFORD CT. 06902 
TEL: 203-357-0626 FAX: 203-348-8761 email: gfalbel@optonline.net 
FIGURE 2 TYPICAL EPDM RUBBER 5” WIDE TUBE MAT 
PROPRIETARY DESIGN DATA
OPTICAL ENERGY TECHNOLOGIES INC. www.opticalenergy.com 
472 WESTOVER ROAD, STAMFORD CT. 06902 
TEL: 203-357-0626 FAX: 203-348-8761 email: gfalbel@optonline.net 
FIGURE 3 SUNPREME FRAMELESS PANEL DESCRIPTION 
PROPRIETARY DESIGN DATA

Ruralsolarpanel

  • 1.
    OPTICAL ENERGY TECHNOLOGIESINC. www.opticalenergy.com 472 WESTOVER ROAD, STAMFORD CT. 06902 TEL: 203-357-0626 FAX: 203-348-8761 email: [email protected] PROPRIETARY DESIGN A EPDM RUBBER TUBING MAT STRIPS AND REFLECTIVE FILM, PRESSED AGAINST REAR SOLAR PANEL GLASS CONDUCTS HEAT ENERGY TO DOMESTIC HOT WATER TANK AND IMPROVES PHOTOELECTRIC OUTPUT EFFICIENCY ONE, 330 WATT SUNPREME FRAMELESS SOLAR PANEL (OUTPUT 380 WATTS) 1/2" PLYWOOD BACKING (PAINTED) SECTION A-A DETAIL SCALE: 4/1 SOLAR PANEL REAR GLASS PVC MANIFOLD SOLAR CELL A FIGURE 1 RURAL ELECTRICITY/WATER HEATING SYSTEM PROPRIETARY DESIGN DATA
  • 2.
    OPTICAL ENERGY TECHNOLOGIESINC. www.opticalenergy.com 472 WESTOVER ROAD, STAMFORD CT. 06902 TEL: 203-357-0626 FAX: 203-348-8761 email: [email protected] RURAL COMBINED ELECTRICITY/ DOMESTIC WATER HEATING SYSTEM As is shown in Figure 1 above, a single 1 X 2 meter2 panel combines photoelectric electrical energy generation with domestic hot water preheating. The Sunpreme panel, shown in Figure 2, when backed with a reflective film generates 380 watts in full sun at its rated temperature of 25°C. If it were mounted in the conventional way using racks, it would heat up to 45°C reducing its electrical output by 15%. But by cooling it with water beginning at sunrise, when the water is at 10°C, the average panel temperature will be only 27.5°C. At sunset, the water temperature will be at or above 45°C, suitable for washing or pre-heated for cooking. The 50 volt output of the panel is reduced by a voltage regulator to 14 volts and can be used to charge a standard 12 volt battery to provide light, and/or radio-TV after sunset. Water can be circulated through the rubber tube strips without a pump by mounting a small water tank above the panel so that the heated water circulates by gravity-thermo-syphonation. The price of this system is broken down as follows: · 1 x 2 meter2 hybrid PV/SOLAR THERMAL PANEL $895- · 12 VOLT DC. PUMP $150- · SOLAR PANEL-12 VOLT BATTERY VOLTAGE REGULATOR $150- ALL PRICES ARE IN US DOLLARS F.O.B. STAMFORD CT USA PROPRIETARY DESIGN DATA
  • 3.
    OPTICAL ENERGY TECHNOLOGIESINC. www.opticalenergy.com 472 WESTOVER ROAD, STAMFORD CT. 06902 TEL: 203-357-0626 FAX: 203-348-8761 email: [email protected] FIGURE 2 TYPICAL EPDM RUBBER 5” WIDE TUBE MAT PROPRIETARY DESIGN DATA
  • 4.
    OPTICAL ENERGY TECHNOLOGIESINC. www.opticalenergy.com 472 WESTOVER ROAD, STAMFORD CT. 06902 TEL: 203-357-0626 FAX: 203-348-8761 email: [email protected] FIGURE 3 SUNPREME FRAMELESS PANEL DESCRIPTION PROPRIETARY DESIGN DATA