Soap and detergent,Soaps & Detergents
Download as PPTX, PDF9 likes3,408 views
This document discusses soaps and detergents. It defines soaps as salts of fatty acids made from fats and oils through saponification. The cleaning action of soaps relies on hydrophobic and hydrophilic regions of the soap molecules. Detergents are similar to soaps but are more soluble in hard water. The document discusses the types of detergents and their advantages over soaps. It also discusses the raw materials and processes used to make soaps and detergents, as well as detergent builders.
![Why detergents?
Owing to the shortage of fats or oils, soap manufacturing becomes so much expensive.
In the detergent manufacturing, fats and oils are not used. So a large amount of edible fats
and oils become available for human consumption.
Detergent is superior in its action to soap even in hard water i.e. the soap forms insoluble
compounds with Ca2+ and Mg2+ present in hard water. This insoluble compounds reduce
the foaming and cleansing action. But detergent don’t form insoluble compounds.
2RCOONa + MgSO4 (RCOO-)2Mg2+ +Na2SO4
Soap insoluble compund
2R-Ar-SO3Na +MgSO4 [R-Ar-SO3-]2 Mg2+ + Na2SO4
Soluble compound](https://image.slidesharecdn.com/soapanddetergent-190125180900/85/Soap-and-detergent-Soaps-Detergents-24-320.jpg)
Soap and detergent,Soaps & Detergents
- 1. MD : MOYNUL ISLAM ID: 20151107004
- 13. Soaps Soaps are water-soluble sodium or potassium salts of higher fatty acids such as oleic acid (C17H33COOH), stearic acid (C17H35COOH), palmitic acid (C15H31COOH), lauric acid (C11H23COOH) are called soap. Soaps are made from fats and oils, or their fatty acids, by hydorlysis and then treating them chemically with a strong alkali. CH2-OOC-C17H35 CH2-OH CH-OOC-C17H35 +3H2O 3C17H35COOH+ CH-OH CH2-OOC-C17H35 CH2-OH Tristearin Stearic acid 3C17H35COOH + 3NaOH C17H35COONa +3H2O Example-Toilet, laundry soap, shaving soap, liqiup soap etc.
- 14. Soap ions consist of two parts, that is the head that consists of the anion region, ionic and also called the hydrophilic region which dissolves in water. Another part is the tail that consists of hydrocarbon region and its molecule has covalent characteristics. Its also called the hydrophobic region which dissolves in grease or oil(dirt). The soap molecules will dissolves in water and reduces the surface tension of water. Water wets the dirty surface. The hydrophilic region dissolves in water whereas the hydrophobic region dissolves in dirt such as grease. Grease is lifted off the surface of the material and suspended in water. The tail region emulsifies and breaks up the grease into small drops. Cleaning action of soap
- 15. Raw materials used for soap preparation Fats or tallow Tallow is the principle fatty material used to prepare soap. The quantities used are about three-fourths of the total oils and fats consumed by the soap industry. It contains the mixed glycerides obtained from the solid fat of cattle. The solid fat is digested with steam; the tallow forms a layer above the water so that it can easily be removed. Fatty oils -Coconut oil-----it contains large proportions of the very desirable glycerides of lauric and myristic acids. It is used in order to get moderately soluble and hard soap. Its melting point is 20-250C. -Palm oil--- palm oil contains 6% free fatty acid. It is colored. So before use, it is bleached in order to get colorless oil. It is used for making toilet soap. -Olive oil--- It is used for the finer quality toilet soap -Castor oil--- It is used for the production of transparent soap. Greases Greases are (20%) the second most important raw materials in soap manufacturing. They are obtained from hogs and smaller domestic animals. They are refined by steam rendering or solvent extraction.
- 16. Some inorganic chemicals such as Na2CO3, Na3PO4, NahCO3, borax etc. are used to improve the quality of the soap which are called soap builders. Soap builders are used for the following purposes To promote the cleansing power. To reduce the overall costs. To enhance the effectiveness of the soap. To prevent the redeposition of the soil from the wash water on the fabrics. To soften the hardness of the water. To control the alkalinity of the solution. To prevent the formation of precipitation in hard water. To prevent the wastage of soap. To decrease the rapid solubility of soap To increase the strength and odor of the soap. Soap builders
- 17. Auxiliary Raw Materials Caustic soda, NaOH---it is one of the principle raw materials used in the saponification process. It is used in making of hard soap. Caustic potash KOH-------it is used in making of soft soap Rosin----Rosin is a plant exudation product which is mainly contains pimaric and abietic acid. Rosin is used for the following purposes --to make lather formation faster -- To increase the cleansing action of the soap -- To soften the hard soap Fillers/Aditives—fillers are used to increase the bulk or weight of the soap without affecting the detergency. Some fillers are added such as a) Talc (5-10%); b) Starch (2%); Glauber salts (Na2SO4.10H2O); d) Pearl ash etc. Coloring agents– Organic dyes and inorganic pigments are generally used. Common coloring matters are--- a) Methyl violet for violet shade; b) Bismark brown for brown; c) Rhodamine for red; d) Zinc oxide for white; e) Ultramarine or methyl blue for blue shade ; f) Cosin for pink shade. Perfume and perfume fixatives Perfume may be natural or synthetic. Natural perfumes are sandal wood oil, lemon grass oil, clove oil, eucalyptus oil, lavender oil etc. Synthetic perfumes are jasmine (benzyl acetate), rose (phenyl ethyl alcohol) and musk (benzoate). Certain perfume fixatives such as Tolu-balsum, Gum-benzoin etc. are used.
- 18. Process of manufacture of soap 1.Full-boiled process •Batch-kettle process or saponification process •Modern /continuous/splitting process or hydrolysis process 1.Semi-boiled process 2.Cold-made process 3.Neutralization process.
- 20. Olive oil storage Palm oil storage Tallow storage Coconut oil storage Blending tank ZnO Deaeration under vacuum Spurge ring Water Hydrolyzer 485 0F 600 psi Vaporizer Tar separator As steam water Glycerol solution (12%) (hydrolysis) 50%NaOH Neat Soap Vacuumfractionator Low MW fatty acid Neutralizer 2' 65' Modern /continuous/splitting process or hydrolysis process
- 21. Batch process Continuous process 1. Raw materials are fed at a time and after complete saponification the soap is taken out. 1. Raw materials are fed continuously and the soap is also taken out continuously. 2. Bleaching of the colored fats or oils is required. 2. Pretreatment of fats or oils is not required. 3. Glycerine solution obtained is only 4% 3. Glycerine solution obtained is only 12% 4. The process conditions are rigid and cannot be changed. 4. The process has flexibility in its control. 5. Large space and manpower are required. 5. Small space and manpower are required. 6. Process time is 7 days. 6. Process time is only 6 hrs. Difference between batch process & continuous process
- 22. Detergent
- 23. A detergent is a surfactant or a mixture of surfactants with "cleaning properties in dilute solutions. These substances are usually alkylbenzenesulfonates, a family of compounds that are similar to soap but are more soluble in hard water, because the polar sulfonate (of detergents) is less likely than the polar carboxyl (of soap) to bind to calcium and other ions found in hard water. Detergents are synthetic organic chemicals which promote better surface tension lowering than soaps. Detergent
- 24. Why detergents? Owing to the shortage of fats or oils, soap manufacturing becomes so much expensive. In the detergent manufacturing, fats and oils are not used. So a large amount of edible fats and oils become available for human consumption. Detergent is superior in its action to soap even in hard water i.e. the soap forms insoluble compounds with Ca2+ and Mg2+ present in hard water. This insoluble compounds reduce the foaming and cleansing action. But detergent don’t form insoluble compounds. 2RCOONa + MgSO4 (RCOO-)2Mg2+ +Na2SO4 Soap insoluble compund 2R-Ar-SO3Na +MgSO4 [R-Ar-SO3-]2 Mg2+ + Na2SO4 Soluble compound
- 25. Types of detergent Anionic detergents– those detergents which produce anion (R-) in water or solution. Anionic detergents dissociate into a long chain anion which acts as the hydrophilic end and the long chain carbon as the hydrophobic end. Example: Alkyl benzene sulphonate, Alkyl sulphate, Alkyl benzene ether sulphonate, Cationic detergent- those detergents which produce cation (R+) in water or solution. Cationic detergents are quaternary ammonium salts of acetates, chlorides, or bromides These detergents have no strong detergent characteristics but have strong germicidal properties. Exam: cetyltrimethylammonium bromide
- 26. Non-Ionic- Molecules of these detergents do not contain any ions. These detergents are esters of alcohols having high molecular mass. They are obtained by reacting polyethylene glycol and stearic acid. Example: Alkyl arul ethylene derivatives, fatty acid amides etc. Amphoteric detergents- those detergents contain both cationic and anionic groups are called amphoteric detergents. Example: Lauryl sarcozinate.
- 27. Detergent builders Some compounds which are added to detergents during preparation for lowering surface tension of water and extending foam for the prevention of redeposition of soil and dirt on the fabric, to increase the effectiveness, brightness, and reduce the overall cost of detergent. These compounds are called detergent builders. Six types of detergent builders are used---- 1. Phosphates 2. Sodium carboxy methyl cellulose 3. Fabric brightners or fluorescent dyes 4. Corrosion inhibitors 5. Antimicrobial agents 6. perfumes