Stacks and queue

1 Introduction to the Stack ADT
• A stack is a data structure that stores and
retrieves items in a last-in-first-out (LIFO)
manner.

Applications of Stacks
• Computer systems use stacks during a
program’s execution to store function return
addresses, local variables, etc.
• Some calculators use stacks for performing
mathematical operations.

Static and Dynamic Stacks
• Static Stacks
– Fixed size
– Can be implemented with an array
• Dynamic Stacks
– Grow in size as needed
– Can be implemented with a linked list

Stack Operations
• Push
– causes a value to be stored in (pushed onto) the
stack
• Pop
– retrieves and removes a value from the stack

The Push Operation
• Suppose we have an empty integer stack
that is capable of holding a maximum of
three values. With that stack we execute the
following push operations.
push(5);
push(10);
push(15);

The Push Operation
The state of the stack after each of the push operations:

The Pop Operation
• Now, suppose we execute three consecutive
pop operations on the same stack:

Other Stack Operations
• isFull: A Boolean operation needed for
static stacks. Returns true if the stack is full.
Otherwise, returns false.
• isEmpty: A Boolean operation needed for
all stacks. Returns true if the stack is empty.
Otherwise, returns false.

The IntStack Class
• Table 1: Member Variables
Member Variable Description
stackArray stackArray A pointer to int. When the constructor is
executed, it uses
stackArray to dynamically allocate an array for storage.
stackSize An integer that holds the size of the stack.
top An integer that is used to mark the top of the stack.

The IntStack Class
• Table 2: Member Functions
Member Function Description
stackArray Constructor The class constructor accepts an integer
argument, which specifies the
size of the stack. An integer array of this size is dynamically
allocated, and assigned to stackArray. Also, the variable top is
initialized to –1.
push The push function accepts an integer argument, which is pushed onto
the top of the stack.
pop The pop function uses an integer reference parameter. The value at
the top of the stack is removed, and copied into the reference
parameter.

The IntStack Class
• Table 2: Member Functions (continued)
Member Function Description
stackArray isFull Returns true if the stack is full and false
otherwise. The stack is
full when top is equal to stackSize – 1.
isEmpty Returns true if the stack is empty, and false otherwise. The stack
is empty when top is set to –1.

Contents of IntStack.h
#ifndef INTSTACK_H
#define INTSTACK_H
class IntStack
{
private:
int *stackArray;
int stackSize;
int top;
public:
IntStack(int);
void push(int);
void pop(int &);
bool isFull(void);
bool isEmpty(void);
};
#endif

Contents of IntStack.cpp
#include <iostream.h>
#include "intstack.h“
//*******************
// Constructor *
//*******************
IntStack::IntStack(int size)
{
stackArray = new int[size];
stackSize = size;
top = -1;
}

//*************************************************
// Member function push pushes the argument onto *
// the stack. *
//*************************************************
void IntStack::push(int num)
{
if (isFull())
{
cout << "The stack is full.n";
}
else
{
top++;
stackArray[top] = num;
}
}

//****************************************************
// Member function pop pops the value at the top *
// of the stack off, and copies it into the variable *
// passed as an argument. *
//****************************************************
void IntStack::pop(int &num)
{
if (isEmpty())
{
cout << "The stack is empty.n";
}
else
{
num = stackArray[top];
top--;
}
}

//***************************************************
// Member function isFull returns true if the stack *
// is full, or false otherwise. *
//***************************************************
bool IntStack::isFull(void)
{
bool status;
if (top == stackSize - 1)
status = true;
else
status = false;
return status;
}

//****************************************************
// Member funciton isEmpty returns true if the stack *
// is empty, or false otherwise. *
//****************************************************
bool IntStack::isEmpty(void)
{
bool status;
if (top == -1)
status = true;
else
status = false;
return status;
}

Program 1
// This program demonstrates the IntStack class.
#include "intstack.h“
void main(void)
{
IntStack stack(5);
int catchVar;
cout << "Pushing 5n";
stack.push(5);
stack.push(10);
stack.push(15);
stack.push(20);
stack.push(25);

Program 1 (continued)
cout << "Popping...n";
stack.pop(catchVar);
cout << catchVar << endl;
}

Program Output
Pushing 5
Pushing 10
Pushing 15
Pushing 20
Pushing 25
Popping...
25
20
15
10
5

About Program 1
• In the program, the constructor is called
with the argument 5. This sets up the
member variables as shown in Figure 4.
Since top is set to –1, the stack is empty

About Program 1
• Figure 5 shows the state of the member
variables after the push function is called
the first time (with 5 as its argument). The
top of the stack is now at element 0.

About Program 1
• Figure 6 shows the state of the member
variables after all five calls to the push
function. Now the top of the stack is at
element 4, and the stack is full.

About Program 1
• Notice that the pop function uses a
reference parameter, num. The value that is
popped off the stack is copied into num so it
can be used later in the program. Figure 7
(on the next slide) depicts the state of the
class members, and the num parameter, just
after the first value is popped off the stack.

Implementing Other Stack
Operations
• The MathStack class demonstrates
functions for stack-based arithmetic.

2 Dynamic Stacks
• A dynamic stack is built on a linked list instead of
an array.
• A linked list-based stack offers two advantages
over an array-based stack.
– No need to specify the starting size of the stack. A
dynamic stack simply starts as an empty linked list, and
then expands by one node each time a value is pushed.
– A dynamic stack will never be full, as long as the
system has enough free memory.

Contents of DynIntStack.h
class DynIntStack
{
private:
struct StackNode
{
int value;
StackNode *next;
};
StackNode *top;
public:
DynIntStack(void)
{ top = NULL; }
void push(int);
void pop(int &);
bool isEmpty(void);
};

Contents of DynIntStack.cpp
#include "dynintstack.h“
//************************************************
// Member function push pushes the argument onto *
// the stack. *
//************************************************
void DynIntStack::push(int num)
{
stackNode *newNode;
// Allocate a new node & store Num
newNode = new stackNode;
newNode->value = num;

// If there are no nodes in the list
// make newNode the first node
if (isEmpty())
{
top = newNode;
newNode->next = NULL;
}
else // Otherwise, insert NewNode before top
{
newNode->next = top;
top = newNode;
}
}
//****************************************************
// Member function pop pops the value at the top *
// of the stack off, and copies it into the variable *
// passed as an argument. *
//****************************************************

void DynIntStack::pop(int &num)
{
stackNode *temp;
if (isEmpty())
{
cout << "The stack is empty.n";
}
else // pop value off top of stack
{
num = top->value;
temp = top->next;
delete top;
top = temp;
}
}

//****************************************************
// Member funciton isEmpty returns true if the stack *
// is empty, or false otherwise. *
//****************************************************
bool DynIntStack::isEmpty(void)
{
bool status;
if (!top)
status = true;
else
status = false;
return status;
}

Program 3
// This program demonstrates the dynamic stack
// class DynIntClass.
#include "dynintstack.h“
void main(void)
{
DynIntStack stack;
int catchVar;
stack.push(5);
stack.push(10);
stack.push(15);

cout << "Popping...n";
cout << "nAttempting to pop again... ";
}
Program Output
Pushing 5
Pushing 10
Pushing 15
Popping...
15
10
5
Attempting to pop again... The stack is empty.

3 The STL stack Container
• The STL stack container may be
implemented as a vector, a list, or a
deque.
• Because the stack container is used to
adapt these other containers, it is often
referred to as a container adapter.

3 The STL stack Container
• Here are examples of how to declare a stack
of ints, implemented as a vector, a
list, and a deque.
stack< int, vector<int> > iStack; // Vector stack
stack< int, list<int> > iStack; // List stack
stack< int > iStack; // Default – deque stack

Program 4
// This program demonstrates the STL stack
// container adapter.
#include <vector>
#include <stack>
using namespace std;
void main(void)
{
int x;
stack< int, vector<int> > iStack;
for (x = 2; x < 8; x += 2)
{
cout << "Pushing " << x << endl;
iStack.push(x);
}

cout << "The size of the stack is ";
cout << iStack.size() << endl;
for (x = 2; x < 8; x += 2)
{
cout << "Popping " << iStack.top() << endl;
iStack.pop();
}
}
Program Output
Pushing 2
Pushing 4
Pushing 6
The size of the stack is 3
Popping 6
Popping 4
Popping 2

4 Introduction to the Queue ADT
• Like a stack, a queue (pronounced "cue") is a data
structure that holds a sequence of elements.
• A queue, however, provides access to its elements
in first-in, first-out (FIFO) order.
• The elements in a queue are processed like
customers standing in a grocery check-out line:
the first customer in line is the first one served.

Example Applications of Queues
• In a multi-user system, a queue is used to hold
print jobs submitted by users , while the printer
services those jobs one at a time.
• Communications software also uses queues to
hold information received over networks and dial-
up connections. Sometimes information is
transmitted to a system faster than it can be
processed, so it is placed in a queue when it is
received.

Static and Dynamic Queues
• Just as stacks are implemented as arrays or
linked lists, so are queues.
• Dynamic queues offer the same advantages
over static queues that dynamic stacks offer
over static stacks.

Queue Operations
• Think of queues as having a front and a
rear. This is illustrated in Figure 8.

Queue Operations
• The two primary queue operations are
enqueuing and dequeuing.
• To enqueue means to insert an element at
the rear of a queue.
• To dequeue means to remove an element
from the front of a queue.

Queue Operations
• Suppose we have an empty static integer
queue that is capable of holding a maximum
of three values. With that queue we execute
the following enqueue operations.
Enqueue(3);
Enqueue(6);
Enqueue(9);

Queue Operations
• Figure 9 illustrates the state of the queue
after each of the enqueue operations.

Queue Operations
• Now let's see how dequeue operations are
performed. Figure 10 illustrates the state of the
queue after each of three consecutive dequeue
operations

Queue Operations
• When the last deqeue operation is
performed in the illustration, the queue is
empty. An empty queue can be signified by
setting both front and rear indices to –1.

Contents of IntQueue.h
class IntQueue
{
private:
int *queueArray;
int queueSize;
int front;
int rear;
int numItems;
public:
IntQueue(int);
~IntQueue(void);
void enqueue(int);
void dequeue(int &);
bool isEmpty(void);
bool isFull(void);
void clear(void);
};

Contents of IntQueue.cpp
#include "IntQueue.h“
//*************************
// Constructor *
//*************************
IntQueue::IntQueue(int s)
{
queueArray = new int[s];
queueSize = s;
front = 0;
rear = 0;
numItems = 0;
}

//*************************
// Destructor *
//*************************
IntQueue::~IntQueue(void)
{
delete [] queueArray;
}

//********************************************
// Function enqueue inserts the value in num *
// at the rear of the queue. *
//********************************************
void IntQueue::enqueue(int num)
{
if (isFull())
cout << "The queue is full.n";
else
{
// Calculate the new rear position
rear = (rear + 1) % queueSize;
// Insert new item
queueArray[rear] = num;
// Update item count
numItems++;
}
}

//*********************************************
// Function dequeue removes the value at the *
// front of the queue, and copies t into num. *
//*********************************************
void IntQueue::dequeue(int &num)
{
if (isEmpty())
cout << "The queue is empty.n";
else
{
// Move front
front = (front + 1) % queueSize;
// Retrieve the front item
num = queueArray[front];
// Update item count
numItems--;
}
}

//*********************************************
// Function isEmpty returns true if the queue *
// is empty, and false otherwise. *
//*********************************************
bool IntQueue::isEmpty(void)
{
bool status;
if (numItems)
status = false;
else
status = true;
return status;
}

//********************************************
// Function isFull returns true if the queue *
// is full, and false otherwise. *
//********************************************
bool IntQueue::isFull(void)
{
bool status;
if (numItems < queueSize)
status = false;
else
status = true;
return status;
}

//*******************************************
// Function clear resets the front and rear *
// indices, and sets numItems to 0. *
//*******************************************
void IntQueue::clear(void)
{
front = queueSize - 1;
rear = queueSize - 1;
numItems = 0;
}

Program 5
// This program demonstrates the IntQeue class
#include "intqueue.h“
void main(void)
{
IntQueue iQueue(5);
cout << "Enqueuing 5 items...n";
// Enqueue 5 items.
for (int x = 0; x < 5; x++)
iQueue.enqueue(x);
// Attempt to enqueue a 6th item.
cout << "Now attempting to enqueue again...n";
iQueue.enqueue(5);

// Deqeue and retrieve all items in the queue
cout << "The values in the queue were:n";
while (!iQueue.isEmpty())
{
int value;
iQueue.dequeue(value);
cout << value << endl;
}
}
Program Output
Enqueuing 5 items...
Now attempting to enqueue again...
The queue is full.
The values in the queue were:
0

5 Dynamic Queues
• A dynamic queue starts as an empty linked list.
• With the first enqueue operation, a node is added,
which is pointed to by front and rear pointers.
• As each new item is added to the queue, a new
node is added to the rear of the list, and the rear
pointer is updated to point to the new node.
• As each item is dequeued, the node pointed to by
the front pointer is deleted, and front is made
to point to the next node in the list.

Dynamic Queues
• Figure 14 shows the structure of a dynamic
queue.

Contents of DynIntQueue.h
class DynIntQueue
{
private:
struct QueueNode
{
int value;
QueueNode *next;
};
QueueNode *front;
QueueNode *rear;
int numItems;
public:
DynIntQueue(void);
~DynIntQueue(void);
void enqueue(int);
void dequeue(int &);
bool isEmpty(void);
void clear(void);
};

Contents of DynIntQueue.cpp
#include "dynintqueue.h“
//************************
// Constructor *
//************************
DynIntQueue::DynIntQueue(void)
{
front = NULL;
rear = NULL;
numItems = 0;
}
//************************
// Destructor *
//************************
DynIntQueue::~DynIntQueue(void)
{
clear();
}

//********************************************
// Function enqueue inserts the value in num *
// at the rear of the queue. *
//********************************************
void DynIntQueue::enqueue(int num)
{
QueueNode *newNode;
newNode = new QueueNode;
newNode->value = num;
newNode->next = NULL;
if (isEmpty())
{
front = newNode;
rear = newNode;
}
else
{
rear->next = newNode;
rear = newNode;
}
numItems++;
}

//**********************************************
// Function dequeue removes the value at the *
// front of the queue, and copies it into num. *
//**********************************************
void DynIntQueue::dequeue(int &num)
{
QueueNode *temp;
if (isEmpty())
cout << "The queue is empty.n";
else
{
num = front->value;
temp = front->next;
delete front;
front = temp;
numItems--;
}
}

//*********************************************
// Function isEmpty returns true if the queue *
// is empty, and false otherwise. *
//*********************************************
bool DynIntQueue::isEmpty(void)
{
bool status;
if (numItems)
status = false;
else
status = true;
return status;
}

//********************************************
// Function clear dequeues all the elements *
// in the queue. *
//********************************************
void DynIntQueue::clear(void)
{
int value; // Dummy variable for dequeue
while(!isEmpty())
dequeue(value);
}

Program 6
// This program demonstrates the DynIntQeue class
#include "dynintqueue.h“
void main(void)
{
DynIntQueue iQueue;
cout << "Enqueuing 5 items...n";
// Enqueue 5 items.
for (int x = 0; x < 5; x++)
iQueue.enqueue(x);
// Deqeue and retrieve all items in the queue
cout << "The values in the queue were:n";
while (!iQueue.isEmpty())
{
int value;
iQueue.dequeue(value);
cout << value << endl;
}
}

Program Ouput
Enqueuing 5 items...
The values in the queue were:
0
1
2
3
4

The STL deque and queue
Containers
• A deque (pronounced "deck" or "deek") is
a double-ended queue. It similar to a
vector, but allows efficient access to
values at both the front and the rear.
• The queue ADT is like the the stack
ADT: it is actually a container adapter.

The deque Container
• Programs that use the deque ADT must
include the deque header file.
• The push_back, pop_front, and
front member functions are used.

Program 7
// This program demonstrates the STL deque
// container.
#include <deque>
void main(void)
{
int x;
deque<int> iDeque;
cout << "I will now enqueue items...n";
for (x = 2; x < 8; x += 2)
{
iDeque.push_back(x);
}
cout << "I will now dequeue items...n";
for (x = 2; x < 8; x += 2)
{
cout << "Popping " << iDeque.front() << endl;
iDeque.pop_front();
}
}

Program Output
I will now enqueue items...
Pushing 2
Pushing 4
Pushing 6
I will now dequeue items...
Popping 2
Popping 4
Popping 6

The queue Container Adapter
• The queue container adapter can be built
upon vectors, lists, or deques.
• By default, it uses deque as its base.

The queue Container Adapter
• The queue insertion and removal operations are
the same as those supported by the stack ADT:
push, pop, and top.
• The queue version of push always inserts an
element at the rear of the queue.
• The queue version of pop always removes an
element from the structure's front.
• The top function returns the value of the element
at the front of the queue.

Program 8
// This program demonstrates the STL queue
// container adapter.
#include <queue>
void main(void)
{
int x;
queue<int> iQueue;
cout << "I will now enqueue items...n";
for (x = 2; x < 8; x += 2)
{
iQueue.push(x);
}
cout << "I will now dequeue items...n";
for (x = 2; x < 8; x += 2)
{
cout << "Popping " << iQueue.front() << endl;
iQueue.pop();
}
}

Program Output
I will now enqueue items...
Pushing 2
Pushing 4
Pushing 6
I will now dequeue items...
Popping 2
Popping 4
Popping 6

Stacks and queue

More Related Content

What's hot

Viewers also liked

Similar to Stacks and queue

More from Amit Vats

Recently uploaded

Stacks and queue