Standard deviationnormal distributionshow

Standard deviationnormal distributionshow

• 1.
  This tutorial isintended to assist students in understanding the normal curve . It is to be reviewed after you have read Chapter 10 and the instructor notes for Unit 1 on the web. You will need to repeatedly click on your mouse or space bar to progress through the information. Your next mouse click will display a new screen. Created by Del Siegle University of Connecticut 2131 Hillside Road Unit 3007 Storrs, CT 06269-3007 [email_address] Understanding the Normal Curve
• 2.
  Length of RightFoot Number of People with that Shoe Size 8 7 6 5 4 3 2 1 4 5 6 7 8 9 10 11 12 13 14 Suppose we measured the right foot length of 30 teachers and graphed the results. Assume the first person had a 10 inch foot. We could create a bar graph and plot that person on the graph. If our second subject had a 9 inch foot, we would add her to the graph. As we continued to plot foot lengths, a pattern would begin to emerge. Your next mouse click will display a new screen.
• 3.
  Length of RightFoot 8 7 6 5 4 3 2 1 4 5 6 7 8 9 10 11 12 13 14 If we were to connect the top of each bar, we would create a frequency polygon. Notice how there are more people ( n =6) with a 10 inch right foot than any other length. Notice also how as the length becomes larger or smaller, there are fewer and fewer people with that measurement. This is a characteristics of many variables that we measure. There is a tendency to have most measurements in the middle, and fewer as we approach the high and low extremes. Number of People with that Shoe Size Your next mouse click will display a new screen.
• 4.
  Length of RightFoot 8 7 6 5 4 3 2 1 4 5 6 7 8 9 10 11 12 13 14 Number of People with that Shoe Size You will notice that if we smooth the lines, our data almost creates a bell shaped curve.
• 5.
  8 7 65 4 3 2 1 4 5 6 7 8 9 10 11 12 13 14 Length of Right Foot Number of People with that Shoe Size You will notice that if we smooth the lines, our data almost creates a bell shaped curve. This bell shaped curve is known as the “Bell Curve” or the “Normal Curve.” Your next mouse click will display a new screen.
• 6.
  Whenever you seea normal curve, you should imagine the bar graph within it. Your next mouse click will display a new screen. 12 13 14 15 16 17 18 19 20 21 22 Points on a Quiz Number of Students 9 8 7 6 5 4 3 2 1
• 7.
  The mean, mode, and median Now lets look at quiz scores for 51 students. Your next mouse click will display a new screen. 12 13 14 15 16 17 18 19 20 21 22 Points on a Quiz Number of Students 9 8 7 6 5 4 3 2 1 12+13+13+14+14+14+14+15+15+15+15+15+15+16+16+16+16+16+16+16+16+ 17+17+17+17+17+17+17+17+17+18+18+18+18+18+18+18+18+19+19+19+19+ 19+ 19+20+20+20+20+ 21+21+22 = 867 867 / 51 = 17 12 13 13 14 14 14 14 15 15 15 15 15 15 16 16 16 16 16 16 16 16 17 17 17 17 17 17 17 17 17 18 18 18 18 18 18 18 18 19 19 19 19 19 19 20 20 20 20 21 21 22 12, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 22 will all fall on the same value in a normal distribution.
• 8.
  Normal distributions (bellshaped) are a family of distributions that have the same general shape. They are symmetric (the left side is an exact mirror of the right side) with scores more concentrated in the middle than in the tails. Examples of normal distributions are shown to the right. Notice that they differ in how spread out they are. The area under each curve is the same. Your next mouse click will display a new screen.
• 9.
  Mathematical Formula forHeight of a Normal Curve The height (ordinate) of a normal curve is defined as: where  is the mean and  is the standard deviation,  is the constant 3.14159, and e is the base of natural logarithms and is equal to 2.718282. x can take on any value from -infinity to +infinity. f(x) is very close to 0 if x is more than three standard deviations from the mean (less than -3 or greater than +3). This information is not needed for EPSY341. It is provided for your information only. Your next mouse click will display a new screen.
• 10.
  If your datafits a normal distribution, approximately 68% of your subjects will fall within one standard deviation of the mean. Approximately 95% of your subjects will fall within two standard deviations of the mean. Over 99% of your subjects will fall within three standard deviations of the mean. Your next mouse click will display a new screen.
• 11.
  Assuming that wehave a normal distribution, it is easy to calculate what percentage of students have z-scores between 1.5 and 2.5. To do this, use the Area Under the Normal Curve Calculator at http://davidmlane.com/hyperstat/z_table.html . Enter 2.5 in the top box and click on Compute Area . The system displays the area below a z-score of 2.5 in the lower box (in this case .9938) Next, enter 1.5 in the top box and click on Compute Area . The system displays the area below a z-score of 1.5 in the lower box (in this case .9332) If .9938 is below z = 2.5 and .9332 is below z = 1.5, then the area between 1.5 and 2.5 must be .9939 - .9332, which is .0606 or 6.06%. Therefore, 6% of our subjects would have z-scores between 1.5 and 2.5. Your next mouse click will display a new screen.
• 12.
  The mean andstandard deviation are useful ways to describe a set of scores. If the scores are grouped closely together, they will have a smaller standard deviation than if they are spread farther apart. Click the mouse to view a variety of pairs of normal distributions below. Your next mouse click will display a new screen. Small Standard Deviation Large Standard Deviation Different Means Different Standard Deviations Different Means Same Standard Deviations Same Means Different Standard Deviations
• 13.
  When you havea subject’s raw score, you can use the mean and standard deviation to calculate his or her standardized score if the distribution of scores is normal. Standardized scores are useful when comparing a student’s performance across different tests, or when comparing students with each other. Your assignment for this unit involves calculating and using standardized scores. z-score -3 -2 -1 0 1 2 3 T-score 20 30 40 50 60 70 80 IQ-score 65 70 85 100 115 130 145 SAT-score 200 300 400 500 600 700 800 Your next mouse click will display a new screen.
• 14.
  The number ofpoints that one standard deviations equals varies from distribution to distribution. On one math test, a standard deviation may be 7 points. If the mean were 45, then we would know that 68% of the students scored from 38 to 52. 31 38 45 52 59 63 Points on Math Test Your next mouse click will display a new screen. 30 35 40 45 50 55 60 Points on a Different Test On another test, a standard deviation may equal 5 points. If the mean were 45, then 68% of the students would score from 40 to 50 points.
• 15.
  Length of RightFoot 8 7 6 5 4 3 2 1 4 5 6 7 8 9 10 11 12 13 14 Data do not always form a normal distribution. When most of the scores are high, the distributions is not normal, but negatively (left) skewed. Number of People with that Shoe Size Skew refers to the tail of the distribution. Your next mouse click will display a new screen. Because the tail is on the negative (left) side of the graph, the distribution has a negative (left) skew.
• 16.
  Length of RightFoot 8 7 6 5 4 3 2 1 4 5 6 7 8 9 10 11 12 13 14 Number of People with that Shoe Size When most of the scores are low, the distributions is not normal, but positively (right) skewed. Because the tail is on the positive (right) side of the graph, the distribution has a positive (right) skew. Your next mouse click will display a new screen.
• 17.
  When data areskewed, they do not possess the characteristics of the normal curve (distribution). For example, 68% of the subjects do not fall within one standard deviation above or below the mean. The mean, mode, and median do not fall on the same score. The mode will still be represented by the highest point of the distribution, but the mean will be toward the side with the tail and the median will fall between the mode and mean. Your next mouse click will display a new screen. mean median mode Negative or Left Skew Distribution mean median mode Positive or Right Skew Distribution
• 18.
  I hope this brief tutorial has been helpful. Created by Del Siegle University of Connecticut 2131 Hillside Road Unit 3007 Storrs, CT 06269-3007 [email_address]