Structured Query Language

https://www.halvorsen.blog
Available Online: https://www.halvorsen.blog
Structured Query Language
Hans-Petter Halvorsen

Structured Query Language
Hans-Petter Halvorsen
Copyright © 2017
https://www.halvorsen.blog

3
Table of Contents
1 Introduction to SQL ...........................................................................................................6
1.1 Data Definition Language (DDL)..................................................................................8
1.2 Data Manipulation Language (DML)...........................................................................8
2 Introduction to SQL Server................................................................................................9
2.1 SQL Server Management Studio...............................................................................10
2.1.1 Create a new Database......................................................................................11
2.1.2 Queries ..............................................................................................................12
3 CREATE TABLE .................................................................................................................13
3.1 Database Modelling..................................................................................................15
3.2 Create Tables using the Designer Tools....................................................................17
3.3 SQL Constraints.........................................................................................................17
3.3.1 PRIMARY KEY.....................................................................................................18
3.3.2 FOREIGN KEY .....................................................................................................19
3.3.3 NOT NULL / Required Columns .........................................................................22
3.3.4 UNIQUE .............................................................................................................23
3.3.5 CHECK................................................................................................................25
3.3.6 DEFAULT ............................................................................................................27
3.3.7 AUTO INCREMENT or IDENTITY.........................................................................28
3.4 ALTER TABLE .............................................................................................................29
4 INSERT INTO ....................................................................................................................31
5 UPDATE ...........................................................................................................................33

4 Table of Contents
Structured Query Language (SQL)
6 DELETE.............................................................................................................................35
7 SELECT .............................................................................................................................37
7.1 The ORDER BY Keyword............................................................................................39
7.2 SELECT DISTINCT.......................................................................................................40
7.3 The WHERE Clause....................................................................................................40
7.3.1 Operators ..........................................................................................................41
7.3.2 LIKE Operator ....................................................................................................41
7.3.3 IN Operator........................................................................................................42
7.3.4 BETWEEN Operator ...........................................................................................42
7.4 Wildcards..................................................................................................................42
7.5 AND & OR Operators ................................................................................................43
7.6 SELECT TOP Clause....................................................................................................44
7.7 Alias ..........................................................................................................................45
7.8 Joins..........................................................................................................................45
7.8.1 Different SQL JOINs ...........................................................................................46
8 SQL Scripts.......................................................................................................................48
8.1 Using Comments.......................................................................................................48
8.1.1 Single-line comment..........................................................................................48
8.1.2 Multiple-line comment......................................................................................48
8.2 Variables ...................................................................................................................49
8.3 Built-in Global Variables ...........................................................................................50
8.3.1 @@IDENTITY.....................................................................................................50
8.4 Flow Control .............................................................................................................51
8.4.1 IF – ELSE.............................................................................................................51
8.4.2 WHILE ................................................................................................................52
8.4.3 CASE...................................................................................................................53

5 Table of Contents
8.4.4 CURSOR .............................................................................................................54
9 Views...............................................................................................................................56
9.1 Using the Graphical Designer ...................................................................................57
10 Stored Procedures........................................................................................................61
10.1 NOCOUNT ON/NOCOUNT OFF..............................................................................64
11 Functions......................................................................................................................66
11.1 Built-in Functions ..................................................................................................66
11.1.1 String Functions .............................................................................................66
11.1.2 Date and Time Functions ...............................................................................67
11.1.3 Mathematics and Statistics Functions ...........................................................67
11.1.4 AVG()..............................................................................................................68
11.1.5 COUNT().........................................................................................................68
11.1.6 The GROUP BY Statement..............................................................................69
11.1.7 The HAVING Clause........................................................................................70
11.2 User-defined Functions.........................................................................................71
12 Triggers.........................................................................................................................72
13 Communication from other Applications.....................................................................75
13.1 ODBC.....................................................................................................................75
13.2 Microsoft Excel......................................................................................................76
14 References....................................................................................................................78

6
1Introduction to SQL
SQL (Structured Query Language) is a database computer language designed for managing
data in relational database management systems (RDBMS).
SQL, is a standardized computer language that was originally developed by IBM for querying,
altering and defining relational databases, using declarative statements.
SQL is pronounced /ˌɛs kjuː ˈɛl/ (letter by letter) or /ˈsiːkwəl/ (as a word).
What can SQL do?
• SQL can execute queries against a database
• SQL can retrieve data from a database
• SQL can insert records in a database
• SQL can update records in a database
• SQL can delete records from a database

7 Introduction to SQL
• SQL can create new databases
• SQL can create new tables in a database
• SQL can create stored procedures in a database
• SQL can create views in a database
• SQL can set permissions on tables, procedures, and views
Even if SQL is a standard, many of the database systems that exist today implement their
own version of the SQL language. In this document, we will use the Microsoft SQL Server as
an example.
There are lots of different database systems, or DBMS – Database Management Systems,
such as:
• Microsoft SQL Server
o Enterprise, Developer versions, etc.
o Express version is free of charge
• Oracle
• MySQL (Oracle, previously Sun Microsystems) - MySQL can be used free of charge
(open source license), Web sites that use MySQL: YouTube, Wikipedia, Facebook
• Microsoft Access
• IBM DB2
• Sybase
• … lots of other systems
In this Tutorial, we will focus on Microsoft SQL Server. SQL Server uses T-SQL (Transact-SQL).
T-SQL is Microsoft's proprietary extension to SQL. T-SQL is very similar to standard SQL, but
in addition it supports some extra functionality, built-in functions, etc.

8 Introduction to SQL
Other useful Tutorials about databases:
• Introduction to Database Systems
• Database Communication in LabVIEW
These Tutorials are located at: https://www.halvorsen.blog
1.1 Data Definition Language (DDL)
The Data Definition Language (DDL) manages table and index structure. The most basic
items of DDL are the CREATE, ALTER, RENAME and DROP statements:
• CREATE creates an object (a table, for example) in the database.
• DROP deletes an object in the database, usually irretrievably.
• ALTER modifies the structure an existing object in various ways—for example, adding
a column to an existing table.
1.2 Data Manipulation Language (DML)
The Data Manipulation Language (DML) is the subset of SQL used to add, update and delete
data.
The acronym CRUD refers to all of the major functions that need to be implemented in a
relational database application to consider it complete. Each letter in the acronym can be
mapped to a standard SQL statement:
Operation SQL Description
Create INSERT INTO inserts new data into a
database
Read (Retrieve) SELECT extracts data from a database
Update UPDATE updates data in a database
Delete (Destroy) DELETE deletes data from a database

9
2Introduction to SQL Server
Microsoft is the vendor of SQL Server.
We have different editions of SQL Server, where SQL Server Express is free to download and
use.
SQL Server uses T-SQL (Transact-SQL). T-SQL is Microsoft's proprietary extension to SQL. T-
SQL is very similar to standard SQL, but in addition it supports some extra functionality, built-
in functions, etc. T-SQL expands on the SQL standard to include procedural programming,
local variables, various support functions for string processing, date processing,
mathematics, etc.
SQL Server consists of a Database Engine and a Management Studio (and lots of other stuff
which we will not mention here). The Database engine has no graphical interface - it is just a
service running in the background of your computer (preferable on the server). The
Management Studio is graphical tool for configuring and viewing the information in the
database. It can be installed on the server or on the client (or both).

10 Introduction to SQL Server
2.1 SQL Server Management Studio
SQL Server Management Studio is a GUI tool included with SQL Server for configuring,
managing, and administering all components within Microsoft SQL Server. The tool includes
both script editors and graphical tools that work with objects and features of the server. As
mentioned earlier, version of SQL Server Management Studio is also available for SQL Server
Express Edition, for which it is known as SQL Server Management Studio Express.
A central feature of SQL Server Management Studio is the Object Explorer, which allows the
user to browse, select, and act upon any of the objects within the server. It can be used to
visually observe and analyze query plans and optimize the database performance, among
others. SQL Server Management Studio can also be used to create a new database, alter any
existing database schema by adding or modifying tables and indexes, or analyze
performance. It includes the query windows which provide a GUI based interface to write
and execute queries.
When creating SQL commands and queries, the “Query Editor” (select “New Query” from
the Toolbar) is used (shown in the figure above).
With SQL and the “Query Editor” we can do almost everything with code, but sometimes it is
also a good idea to use the different Designer tools in SQL to help us do the work without
coding (so much).

2.1.1 Create a new Database
It is quite simple to create a new database in Microsoft SQL Server. Just right-click on the
“Databases” node and select “New Database…”
There are lots of settings you may set regarding your database, but the only information you
must fill in is the name of your database:

You may also use the SQL language to create a new database, but sometimes it is easier to
just use the built-in features in the Management Studio.
2.1.2 Queries
In order to make a new SQL query, select the “New Query” button from the Toolbar.
Here we can write any kind of queries that is supported by the SQL language.

13
3CREATE TABLE
Before you start implementing your tables in the database, you should always spend some
time design your tables properly using a design tool like, e.g., ERwin, Toad Data Modeler,
PowerDesigner, Visio, etc. This is called Database Modeling.
The CREATE TABLE statement is used to create a table in a database.
Syntax:
CREATE TABLE table_name
(
column_name1 data_type,
....
)
The data type specifies what type of data the column can hold.

14 CREATE TABLE
You have special data types for numbers, text dates, etc.
Examples:
• Numbers: int, float
• Text/Stings: varchar(X) – where X is the length of the string
• Dates: datetime
• etc.
Example:
We want to create a table called “CUSTOMER” which has the following columns and data
types:
CREATE TABLE CUSTOMER
(
CustomerId int IDENTITY(1,1) PRIMARY KEY,
CustomerNumber int NOT NULL UNIQUE,
LastName varchar(50) NOT NULL,
FirstName varchar(50) NOT NULL,
AreaCode int NULL,
Address varchar(50) NULL,
Phone varchar(50) NULL,
)
GO
Best practice:
When creating tables you should consider following these guidelines:
• Tables: Use upper case and singular form in table names – not plural, e.g.,
“STUDENT” (not students)
• Columns: Use Pascal notation, e.g., “StudentId”
• Primary Key:
o If the table name is “COURSE”, name the Primary Key column “CourseId”, etc.

15 CREATE TABLE
o “Always” use Integer and Identity(1,1) for Primary Keys. Use UNIQUE
constraint for other columns that needs to be unique, e.g. RoomNumber
• Specify Required Columns (NOT NULL) – i.e., which columns that need to have data
or not
• Standardize on few/these Data Types: int, float, varchar(x), datetime, bit
• Use English for table and column names
• Avoid abbreviations! (Use RoomNumber – not RoomNo, RoomNr, ...)
3.1 Database Modelling
As mention in the beginning of the chapter, you should always start with database modelling
before you start implementing the tables in a database system.
Below we see a database model in created with ERwin.
With this tool we can transfer the database model as tables into different database systems,
such as e.g., SQL Server. CA ERwin Data Modeler Community Edition is free with a 25 objects
limit. It has support for Oracle, SQL Server, MySQL, ODBC and Sybase.

16 CREATE TABLE
Below we see the same tables inside the design tool in SQL Server.

17 CREATE TABLE
3.2 Create Tables using the Designer Tools
Even if you can do “everything” using the SQL language, it is sometimes easier to do it in the
designer tools in the Management Studio in SQL Server.
Instead of creating a script you may as well easily use the designer for creating tables.
Step1: Select “New Table …”:
Step2: Next, the table designer pops up where you can add columns, data types, etc.
In this designer we may also specify Column Names, Data Types, etc.
Step 3: Save the table by clicking the Save button.
3.3 SQL Constraints
Constraints are used to limit the type of data that can go into a table.

18 CREATE TABLE
Constraints can be specified when a table is created (with the CREATE TABLE statement) or
after the table is created (with the ALTER TABLE statement).
Here are the most important constraints:
• PRIMARY KEY
• NOT NULL
• UNIQUE
• FOREIGN KEY
• CHECK
• DEFAULT
• IDENTITY
In the sections below we will explain some of these in detail.
3.3.1 PRIMARY KEY
The PRIMARY KEY constraint uniquely identifies each record in a database table.
Primary keys must contain unique values. It is normal to just use running numbers, like 1, 2,
3, 4, 5, … as values in Primary Key column. It is a good idea to let the system handle this for
you by specifying that the Primary Key should be set to identity(1,1). IDENTITY(1,1) means
the first value will be 1 and then it will increment by 1.
Each table should have a primary key, and each table can have only ONE primary key.
If we take a closer look at the CUSTOMER table created earlier:
CREATE TABLE [CUSTOMER]
(
AreaCode int NULL,
)
GO
As you see we use the “Primary Key” keyword to specify that a column should be the
Primary Key.

19 CREATE TABLE
Setting Primary Keys in the Designer Tools:
If you use the Designer tools in SQL Server, you can easily set the primary Key in a table just
by right-click and select “Set primary Key”.
The primary Key column will then have a small key in front to illustrate that this column is
a Primary Key.
3.3.2 FOREIGN KEY
A FOREIGN KEY in one table points to a PRIMARY KEY in another table.
Example:
We will create a CREATE TABLE script for these tables:

20 CREATE TABLE
SCHOOL:
CREATE TABLE SCHOOL
(
SchoolId int IDENTITY(1,1) PRIMARY KEY,
SchoolName varchar(50) NOT NULL UNIQUE,
Description varchar(1000) NULL,
PostCode varchar(50) NULL,
PostAddress varchar(50) NULL,
)
GO
CLASS:
CREATE TABLE CLASS
(
ClassId int IDENTITY(1,1) PRIMARY KEY,
SchoolId int NOT NULL FOREIGN KEY REFERENCES SCHOOL (SchoolId),
ClassName varchar(50) NOT NULL UNIQUE,
Description varchar(1000) NULL,
)
GO
The FOREIGN KEY constraint is used to prevent actions that would destroy links between
tables.
The FOREIGN KEY constraint also prevents that invalid data from being inserted into the
foreign key column, because it has to be one of the values contained in the table it points to.
Setting Foreign Keys in the Designer Tools:
If you want to use the designer, right-click on the column that you want to be the Foreign
Key and select “Relationships…”:

21 CREATE TABLE
The following window pops up (Foreign Key Relationships):
Click on the “Add” button and then click on the small “…” button. Then the following window
pops up (Tables and Columns):

22 CREATE TABLE
Here you specify the primary Key Column in the Primary Key table and the Foreign Key
Column in the Foreign Key table.
3.3.3 NOT NULL / Required Columns
The NOT NULL constraint enforces a column to NOT accept NULL values.
The NOT NULL constraint enforces a field to always contain a value. This means that you
cannot insert a new record, or update a record without adding a value to this field.
(
AreaCode int NULL,
)
GO

23 CREATE TABLE
We see that “CustomerNumber”, “LastName” and “FirstName” is set to “NOT NULL”, this
means these columns needs to contain data. While “AreaCode”, “Address” and “Phone” may
be left empty, i.e, they don’t need to be filled out.
Note! A primary key column cannot contain NULL values.
Setting NULL/NOT NULL in the Designer Tools:
In the Table Designer you can easily set which columns that should allow NULL or not:
3.3.4 UNIQUE
The UNIQUE constraint uniquely identifies each record in a database table. The UNIQUE and
PRIMARY KEY constraints both provide a guarantee for uniqueness for a column or set of
columns.
A PRIMARY KEY constraint automatically has a UNIQUE constraint defined on it.
Note! You can have many UNIQUE constraints per table, but only one PRIMARY KEY
constraint per table.
(
AreaCode int NULL,

24 CREATE TABLE
)
GO
We see that the “CustomerNumber” is set to UNIQUE, meaning each customer must have a
unique Customer Number. Example:
Setting UNIQUE in the Designer Tools:
If you want to use the designer, right-click on the column that you want to be UNIQUE and
select “Indexes/Keys…”:
Then click “Add” and then set the “Is Unique” property to “Yes”:

25 CREATE TABLE
3.3.5 CHECK
The CHECK constraint is used to limit the value range that can be placed in a column.
If you define a CHECK constraint on a single column it allows only certain values for this
column.
If you define a CHECK constraint on a table it can limit the values in certain columns based
on values in other columns in the row.
Example:
(
CustomerNumber int NOT NULL UNIQUE CHECK(CustomerNumber>0),
AreaCode int NULL,
)
GO
In this case, when we try to insert a Customer Number less than zero we will get an error
message.
Setting CHECK constraints in the Designer Tools:
If you want to use the designer, right-click on the column where you want to set the
constraints and select “Check Constraints…”:

26 CREATE TABLE
Then click “Add” and then click “…” in order to open the Expression window:
In the Expression window you can type in the expression you want to use:

27 CREATE TABLE
3.3.6 DEFAULT
The DEFAULT constraint is used to insert a default value into a column.
The default value will be added to all new records, if no other value is specified.
Example:
(
Country varchar(20) DEFAULT 'Norway',
AreaCode int NULL,
)
GO
Setting DEFAULT values in the Designer Tools:
Select the column and go into the “Column Properties”:

28 CREATE TABLE
3.3.7 AUTO INCREMENT or IDENTITY
Very often we would like the value of the primary key field to be created automatically every
time a new record is inserted.
Example:
(
AreaCode int NULL,
)
GO
As shown below, we use the IDENTITY() for this. IDENTITY(1,1) means the first value will be 1
and then it will increment by 1.
Setting identity(1,1) in the Designer Tools:
We can use the designer tools to specify that a Primary Key should be an identity column
that is automatically generated by the system when we insert data in to the table.
Click on the column in the designer and go into the Column Properties window:

29 CREATE TABLE
3.4 ALTER TABLE
The ALTER TABLE statement is used to add, delete, or modify columns in an existing table.
To add a column in a table, use the following syntax:
ALTER TABLE table_name
ADD column_name datatype
To delete a column in a table, use the following syntax (notice that some database systems
don't allow deleting a column):
DROP COLUMN column_name
To change the data type of a column in a table, use the following syntax:
ALTER COLUMN column_name datatype
If we use CREATE TABLE and the table already exists in the table we will get an error
message, so if we combine CREATE TABLE and ALTER TABLE we can create robust database
scripts that gives no errors, as the example shown below:
if not exists (select * from dbo.sysobjects where id = object_id(N'[CUSTOMER]') and
OBJECTPROPERTY(id, N'IsUserTable') = 1)
(
CustomerId int PRIMARY KEY,
AreaCode int NULL,
)
GO
if exists(select * from dbo.syscolumns where id = object_id(N'[CUSTOMER]') and
OBJECTPROPERTY(id, N'IsUserTable') = 1 and name = 'CustomerId')
ALTER TABLE CUSTOMER ALTER COLUMN CustomerId int
Else
ALTER TABLE CUSTOMER ADD CustomerId int
GO
if exists(select * from dbo.syscolumns where id = object_id(N'[CUSTOMER]') and
OBJECTPROPERTY(id, N'IsUserTable') = 1 and name = 'CustomerNumber')
ALTER TABLE CUSTOMER ALTER COLUMN CustomerNumber int

30 CREATE TABLE
Else
ALTER TABLE CUSTOMER ADD CustomerNumber int
GO
...

31
4INSERT INTO
The INSERT INTO statement is used to insert a new row in a table.
It is possible to write the INSERT INTO statement in two forms.
The first form doesn't specify the column names where the data will be inserted, only their
values:
INSERT INTO table_name
VALUES (value1, value2, value3,...)
Example:
INSERT INTO CUSTOMER VALUES ('1000', 'Smith', 'John', 12,
'California', '11111111')
The second form specifies both the column names and the values to be inserted:
INSERT INTO table_name (column1, column2, column3,...)
VALUES (value1, value2, value3,...)
This form is recommended!
Example:
INSERT INTO CUSTOMER (CustomerNumber, LastName, FirstName, AreaCode,
Address, Phone)
VALUES ('1000', 'Smith', 'John', 12, 'California', '11111111')
Insert Data Only in Specified Columns:
It is also possible to only add data in specific columns.
Example:
INSERT INTO CUSTOMER (CustomerNumber, LastName, FirstName)
VALUES ('1000', 'Smith', 'John')
Note! You need at least to include all columns that cannot be NULL.
We remember the table definition for the CUSTOMER table:

32 INSERT INTO
i.e., we need to include at least “CustomerNumber”, “LastName” and “FirstName”.
“CustomerId” is set to “identity(1,1)” and therefore values for this column are generated by
the system.
Insert Data in the Designer Tools:
When you have created the tables, you can easily insert data into them using the designer
tools. Right-click on the specific table and select “Edit Top 200 Rows”:
Then you can enter data in a table format, similar to, e.g., MS Excel:

33
5UPDATE
The UPDATE statement is used to update existing records in a table.
The syntax is as follows:
UPDATE table_name
SET column1=value, column2=value2,...
WHERE some_column=some_value
Note! Notice the WHERE clause in the UPDATE syntax. The WHERE clause specifies which
record or records that should be updated. If you omit the WHERE clause, all records will be
updated!
Example:
update CUSTOMER set AreaCode=46 where CustomerId=2
Before update:
After update:
If you don’t include the WHERE clause the result becomes:
→ So make sure to include the WHERE clause when using the UPDATE command!

34 UPDATE
Update Data in the Designer Tools:
The same way you insert data you can also update the data. Right-click on the specific table
and select “Edit Top 200 Rows”:
Then you can change your data:

35
6DELETE
The DELETE statement is used to delete rows in a table.
Syntax:
DELETE FROM table_name
WHERE some_column=some_value
Note! Notice the WHERE clause in the DELETE syntax. The WHERE clause specifies which
record or records that should be deleted. If you omit the WHERE clause, all records will be
deleted!
Example:
delete from CUSTOMER where CustomerId=2
Before delete:
After delete:
Delete All Rows:
It is possible to delete all rows in a table without deleting the table. This means that the
table structure, attributes, and indexes will be intact:
DELETE FROM table_name
Note! Make sure to do this only when you really mean it! You cannot UNDO this statement!
Delete Data in the Designer Tools:
You delete data in the designer by right-click on the row and select “Delete”:

36 DELETE

37
7SELECT
The SELECT statement is probably the most used SQL command. The SELECT statement is
used for retrieving rows from the database and enables the selection of one or many rows or
columns from one or many tables in the database.
We will use the CUSTOMER table as an example.
The CUSTOMER table has the following columns:
The CUSTOMER table contains the following data:
Example:
select * from CUSTOMER
This simple example gets all the data in the table CUSTOMER. The symbol “*” is used when
you want to get all the columns in the table.

38 SELECT
If you only want a few columns, you may specify the names of the columns you want to
retrieve, example:
select CustomerId, LastName, FirstName from CUSTOMER
So in the simplest form we can use the SELECT statement as follows:
select <column_names> from <table_names>
If we want all columns, we use the symbol “*”
Note! SQL is not case sensitive. SELECT is the same as select.
The full syntax of the SELECT statement is complex, but the main clauses can be summarized
as:
SELECT
[ ALL | DISTINCT ]
[TOP ( expression ) [PERCENT] [ WITH TIES ] ]
select_list [ INTO new_table ]
[ FROM table_source ] [ WHERE search_condition ]
[ GROUP BY group_by_expression ]
[ HAVING search_condition ]
[ ORDER BY order_expression [ ASC | DESC ] ]
It seems complex, but we will take the different parts step by step in the next sections.
Select Data in the Designer Tools:
Right-click on a table and select “Select Top 1000 Rows”:
The following will appear:

39 SELECT
A Select query is automatically created for you which you can edit if you want to.
7.1 The ORDER BY Keyword
If you want the data to appear in a specific order you need to use the “order by” keyword.
Example:
select * from CUSTOMER order by LastName
You may also sort by several columns, e.g. like this:
select * from CUSTOMER order by Address, LastName
If you use the “order by” keyword, the default order is ascending (“asc”). If you want the
order to be opposite, i.e., descending, then you need to use the “desc” keyword.

40 SELECT
select * from CUSTOMER order by LastName desc
7.2 SELECT DISTINCT
In a table, some of the columns may contain duplicate values. This is not a problem,
however, sometimes you will want to list only the different (distinct) values in a table.
The DISTINCT keyword can be used to return only distinct (different) values.
select distinct <column_names> from <table_names>
Example:
select distinct FirstName from CUSTOMER
7.3 The WHERE Clause
The WHERE clause is used to extract only those records that fulfill a specified criterion.
select <column_names>
from <table_name>
where <column_name> operator value
Example:
select * from CUSTOMER where CustomerNumber='1001'

41 SELECT
Note! SQL uses single quotes around text values, as shown in the example above.
7.3.1 Operators
With the WHERE clause, the following operators can be used:
Operator Description
= Equal
<> Not equal
> Greater than
< Less than
>= Greater than or equal
<= Less than or equal
BETWEEN Between an inclusive range
LIKE Search for a pattern
IN If you know the exact value you want to return for at least one of the
columns
Examples:
select * from CUSTOMER where AreaCode>30
7.3.2 LIKE Operator
The LIKE operator is used to search for a specified pattern in a column.
Syntax:
SELECT column_name(s)
FROM table_name
WHERE column_name LIKE pattern
Example:
select * from CUSTOMER where LastName like 'J%'
Note! The "%" sign can be used to define wildcards (missing letters in the pattern) both
before and after the pattern.

42 SELECT
select * from CUSTOMER where LastName like '%a%'
You may also combine with the NOT keyword, example:
select * from CUSTOMER where LastName not like '%a%'
7.3.3 IN Operator
The IN operator allows you to specify multiple values in a WHERE clause.
Syntax:
FROM table_name
WHERE column_name IN (value1,value2,...)
7.3.4 BETWEEN Operator
The BETWEEN operator selects a range of data between two values. The values can be
numbers, text, or dates.
Syntax:
FROM table_name
WHERE column_name
BETWEEN value1 AND value2
7.4 Wildcards
SQL wildcards can substitute for one or more characters when searching for data in a
database.
Note! SQL wildcards must be used with the SQL LIKE operator.
With SQL, the following wildcards can be used:

43 SELECT
Wildcard Description
% A substitute for zero or more characters
_ A substitute for exactly one character
[charlist] Any single character in charlist
[^charlist]
or
[!charlist]
Any single character not in charlist
Examples:
SELECT * FROM CUSTOMER WHERE LastName LIKE 'J_cks_n'
SELECT * FROM CUSTOMER WHERE CustomerNumber LIKE '[10]%'
7.5 AND & OR Operators
The AND operator displays a record if both the first condition and the second condition is
true.
The OR operator displays a record if either the first condition or the second condition is true.
Examples:
select * from CUSTOMER where LastName='Smith' and FirstName='John'
select * from CUSTOMER where LastName='Smith' or FirstName='John'

44 SELECT
Combining AND & OR:
You can also combine AND and OR (use parenthesis to form complex expressions).
Example:
where LastName='Smith' and (FirstName='John' or FirstName='Smith')
7.6 SELECT TOP Clause
The TOP clause is used to specify the number of records to return.
The TOP clause can be very useful on large tables with thousands of records. Returning a
large number of records can impact on performance.
Syntax:
SELECT TOP number|percent column_name(s)
FROM table_name
Examples:
select TOP 1 * from CUSTOMER
You can also specify in percent:
select TOP 60 percent * from CUSTOMER
This is very useful for large tables with thousands of records

45 SELECT
7.7 Alias
You can give a table or a column another name by using an alias. This can be a good thing to
do if you have very long or complex table names or column names.
An alias name could be anything, but usually it is short.
SQL Alias Syntax for Tables:
FROM table_name
AS alias_name
SQL Alias Syntax for Columns:
SELECT column_name AS alias_name
FROM table_name
7.8 Joins
SQL joins are used to query data from two or more tables, based on a relationship between
certain columns in these tables.

46 SELECT
7.8.1 Different SQL JOINs
Before we continue with examples, we will list the types of JOIN you can use, and the
differences between them.
• JOIN: Return rows when there is at least one match in both tables
• LEFT JOIN: Return all rows from the left table, even if there are no matches in the
right table
• RIGHT JOIN: Return all rows from the right table, even if there are no matches in the
left table
• FULL JOIN: Return rows when there is a match in one of the tables
Example:
Given 2 tables:
• SCHOOL
• CLASS

47 SELECT
The diagram is shown below:
We want to get the following information using a query:
SchoolName ClassName
… …
… …
In order to get information from more than one table we need to use the JOIN. The JOIN is
used to join the primary key in one table with the foreign key in another table.
select
SCHOOL.SchoolName,
CLASS.ClassName
from
SCHOOL
INNER JOIN CLASS ON SCHOOL.SchoolId = CLASS.SchoolId

48
8SQL Scripts
A SQL script is a collection of SQL statements that you can execute in one operation. You can
use any kind of SQL commands, such as insert, select, delete, update, etc. In addition you
can define and use variables, and you may also use program flow like If-Else, etc. You may
also add comments to make the script easier to read and understand.
8.1 Using Comments
Using comments in you SQL script is important to make the script easier to read and
understand.
In SQL we can use 2 different kinds of comments:
• Single-line comment
• Multiple-line comment
8.1.1 Single-line comment
We can comment one line at the time using “--” before the text you want to comment out.
Syntax:
-- text_of_comment
8.1.2 Multiple-line comment
We can comment several line using “/*” in the start of the comment and “*/” in the end of
the comment.
Syntax:
/*
text_of_comment
text_of_comment
*/

49 SQL Scripts
8.2 Variables
The ability to using variables in SQL is a powerful feature. You need to use the keyword
DECLARE when you want to define the variables. Local variables must have the the symbol
“@” as a prefix. You also need to specify a data type for your variable (int, varchar(x), etc.).
Syntax for declaring variables:
declare @local_variable data_type
If you have more than one variable you want to declare:
declare
@myvariable1 data_type,
@myvariable2 data_type,
…
When you want to assign values to the variable, you must use either a SET or a SELECT
statement.
Example:
declare @myvariable int
set @myvariable=4
If you want to see the value for a variable, you can e.g., use the PRINT command like this:
declare @myvariable int
set @myvariable=4
print @myvariable
The following will be shown in SQL Server:
Assigning variables with a value from a SELECT statement is very useful.

50 SQL Scripts
We use the CUSTOMER table as an example:
You can assign a value to the variable from a select statement like this:
declare @mylastname varchar(50)
select @mylastname=LastName from CUSTOMER where CustomerId=2
print @mylastname
You can also use a variable in the WHERE clause LIKE, e.g., this:
declare @find varchar(30)
set @find = 'J%'
where LastName LIKE @find
8.3 Built-in Global Variables
SQL have lots of built-in variables that are very useful to use in queries and scripts.
8.3.1 @@IDENTITY
After an INSERT, SELECT INTO, or bulk copy statement is completed, @@IDENTITY contains
the last identity value that is generated by the statement. If the statement did not affect any
tables with identity columns, @@IDENTITY returns NULL. If multiple rows are inserted,
generating multiple identity values, @@IDENTITY returns the last identity value generated.
Example:
Given to tables; SCHOOL and COURSE:

51 SQL Scripts
SCHOOL table: COURSE table:
We want to insert a new School into the SCHOOL table and we want to insert 2 new Courses
in the COURSE table that belong to the School we insert. To find the “SchoolId” we can use
the @@IDENTITY variable:
declare @SchoolId int
-- Insert Data into SCHOOL table
insert into SCHOOL(SchoolName) values ('MIT')
select @SchoolId = @@IDENTITY
-- Insert Courses for the specific School above in the COURSE table
insert into COURSE(SchoolId,CourseName) values (@SchoolId, 'MIT-
101')
insert into COURSE(SchoolId,CourseName) values (@SchoolId, 'MIT-
201')
The result becomes:
SCHOOL table: COURSE table:
8.4 Flow Control
As with other programming languages you can use different kind of flow control, such as IF-
ELSE, WHILE, etc, which is very useful.
8.4.1 IF – ELSE
The IF-ELSE is very useful. Below we see an example:
declare @customerNumber int

52 SQL Scripts
select @customerNumber=CustomerNumber from CUSTOMER
where CustomerId=2
if @customerNumber > 1000
print 'The Customer Number is larger than 1000'
else
print 'The Customer Number is not larger than 1000'
BEGIN…END:
If more than one line of code is to be executed within an IF sentence you need to use
BEGIN…END.
Example:
select @customerNumber=CustomerNumber from CUSTOMER where
CustomerId=2
if @customerNumber > 1000
begin
print 'The Customer Number is larger than 1000'
update CUSTOMER set AreaCode=46 where CustomerId=2
end
else
print 'The Customer Number is not larger than 1000'
8.4.2 WHILE
We can also use WHILE, which is known from other programming languages.
Example:
We are using the CUSTOMER table:
and the following query:
while (select AreaCode from CUSTOMER where CustomerId=1) < 20
begin
update CUSTOMER set AreaCode = AreaCode + 1

53 SQL Scripts
end
As you can see the code inside the WHILE loop is executed as long as “AreaCode” for
CustomerId=1 is less than 20. For each iteration is the “AreaCode” for that customer
incremented with 1.
8.4.3 CASE
The CASE statement evaluates a list of conditions and returns one of multiple possible result
expressions.
Example:
We have a “GRADE” table that contains the grades for each student in different courses:
select GradeId, StudentId, CourseId, Grade from GRADE
In the “GRADE” table is the grades stored as numbers, but since the students get grades with
the letters A..F (A=5, B=4, C=3, D=2, E=1, F=0), we want to convert the values in the table
into letters using a CASE statement:
select
GradeId,
StudentId,
CourseId,
case Grade
when 5 then 'A'
when 4 then 'B'
when 3 then 'C'
when 2 then 'D'
when 1 then 'E'
when 0 then 'F'
else '-'
end as Grade
from

54 SQL Scripts
GRADE
8.4.4 CURSOR
In advances scripts, CURSORs may be very useful. A CURSOR works like an advanced WHILE
loop which we use to iterate through the records in one or more tables.
CURSORS are used mainly in stored procedures, triggers, and SQL scripts.
Example:
We will create a CURSOR that iterate through all the records in the CUSTOMER table and
check if the Phone number consists of 8 digits, if not the script will replace the invalid Phone
number with the text “Phone number is not valid”.
Here is the SQL Script using a CURSOR:
DECLARE
@CustomerId int,
@phone varchar(50)
DECLARE db_cursor CURSOR
FOR SELECT CustomerId from CUSTOMER
OPEN db_cursor
FETCH NEXT FROM db_cursor INTO @CustomerId
WHILE @@FETCH_STATUS = 0
BEGIN
select @phone=Phone from CUSTOMER where CustomerId=@CustomerId
if LEN(@phone) < 8

55 SQL Scripts
update CUSTOMER set Phone='Phone number is not valid'
where CustomerId=@CustomerId
FETCH NEXT FROM db_cursor INTO @CustomerId
END
CLOSE db_cursor
DEALLOCATE db_cursor
The CUSTOMER table becomes:
Creating and using a CURSOR includes these steps:
• Declare SQL variables to contain the data returned by the cursor. Declare one
variable for each result set column.
• Associate a SQL cursor with a SELECT statement using the DECLARE CURSOR
statement. The DECLARE CURSOR statement also defines the characteristics of the
cursor, such as the cursor name and whether the cursor is read-only or forward-only.
• Use the OPEN statement to execute the SELECT statement and populate the cursor.
• Use the FETCH INTO statement to fetch individual rows and have the data for each
column moved into a specified variable. Other SQL statements can then reference
those variables to access the fetched data values.
• When you are finished with the cursor, use the CLOSE statement. Closing a cursor
frees some resources, such as the cursor's result set and its locks on the current row.
The DEALLOCATE statement completely frees all resources allocated to the cursor,
including the cursor name.

56
9Views
Views are virtual table for easier access to data stored in multiple tables.
Syntax for creating a View:
CREATE VIEW <ViewName>
AS
…
... but it might be easier to do it in the graphical view designer that are built into SQL
Management Studio.
Syntax for using a View:
select * from <MyView> where …
As shown above, we use a VIEW just like we use an ordinary table.

57 Views
Example:
We use the SCHOOL and CLASS tables as an example for our View. We want to create a View
that lists all the existing schools and the belonging classes.
We create the VIEW using the CREATE VIEW command:
CREATE VIEW SchoolView
AS
SELECT
SCHOOL.SchoolName,
CLASS.ClassName
FROM
SCHOOL
INNER JOIN CLASS ON SCHOOL.SchoolId = CLASS.SchoolId
Note! In order to get information from more than one table, we need to link the tables
together using a JOIN.
9.1 Using the Graphical Designer
We create the same View using the graphical designer in SQL Server Management Studio:

58 Views
Step 1: Right-click on the View node and select “New View…”:
Step 2: Add necessary tables:

59 Views
Step 3: Add Columns, etc.
Step 4: Save the VIEW:

60 Views
Step 5: Use the VIEW in a query:
select * from SchoolView

61
10 Stored Procedures
A Stored Procedure is a precompiled collection of SQL statements. In a stored procedure you
can use if sentence, declare variables, etc.
Syntax for creating a Stored Procedure:
CREATE PROCEDURE <ProcedureName>
@<Parameter1> <datatype>
…
declare
@myVariable <datatype>
… Create your Code here
Note! You need to use the symbol “@” before variable names.
Syntax for using a Stored Procedure:
EXECUTE <ProcedureName(…)>
Example:

We use the SCHOOL and CLASS tables as an example for our Stored Procedure. We want to
create a Stored Procedure that lists all the existing schools and the belonging classes.
We create the Stored Procedure as follows:
CREATE PROCEDURE GetAllSchoolClasses
AS
select
SCHOOL.SchoolName,
CLASS.ClassName
from
SCHOOL
inner join CLASS on SCHOOL.SchoolId = CLASS.SchoolId
order by SchoolName, ClassName
When we have created the Stored Procedure we can run (or execute) the Stored procedure
using the execute command like this:
execute GetAllSchoolClasses
We can also create a Store Procedure with input parameters.
Example:

We use the same tables in this example (SCHOOL and CLASS) but now we want to list all
classes for a specific school.
The Stored Procedure becomes:
CREATE PROCEDURE GetSpecificSchoolClasses
@SchoolName varchar(50)
AS
select
SCHOOL.SchoolName,
CLASS.ClassName
from
SCHOOL
where SchoolName=@SchoolName
order by ClassName
We run (or execute) the Stored Procedure:
execute GetSpecificSchoolClasses 'TUC'
or:
execute GetSpecificSchoolClasses 'NTNU'
When we try to create a Stored Procedure that already exists we get the following error
message:
There is already an object named 'GetSpecificSchoolClasses' in the database.
Then we first need to delete (or DROP) the old Stored Procedure before we can recreate it
again.
We can do this manually in the Management Studio in SQL like this:

A better solution is to add code for this in our script, like this:
IF EXISTS (SELECT name
FROM sysobjects
WHERE name = GetSpecificSchoolClasses '
AND type = 'P')
DROP PROCEDURE GetSpecificSchoolClasses
GO
CREATE PROCEDURE GetSpecificSchoolClasses
@SchoolName varchar(50)
AS
select
SCHOOL.SchoolName,
CLASS.ClassName
from
SCHOOL
where SchoolName=@SchoolName
order by ClassName
So we use CREATE PROCEDURE to create a Stored Procedure and we use DROP PROCEDURE
to delete a Stored Procedure.
10.1 NOCOUNT ON/NOCOUNT OFF
In advanced Stored Procedures and Script, performance is very important. Using SET
NOCOUNT ON and SET NOCOUNT OFF makes the Stored Procedure run faster.
SET NOCOUNT ON stops the message that shows the count of the number of rows affected
by a Transact-SQL statement or stored procedure from being returned as part of the result
set.

SET NOCOUNT ON prevents the sending of DONE_IN_PROC messages to the client for each
statement in a stored procedure. For stored procedures that contain several statements that
do not return much actual data, or for procedures that contain Transact-SQL loops, setting
SET NOCOUNT to ON can provide a significant performance boost, because network traffic is
greatly reduced.
Example:
FROM sysobjects
WHERE name = 'sp_LIMS_IMPORT_REAGENT'
AND type = 'P')
DROP PROCEDURE sp_LIMS_IMPORT_REAGENT
GO
CREATE PROCEDURE sp_LIMS_IMPORT_REAGENT
@Name varchar(100),
@LotNumber varchar(100),
@ProductNumber varchar(100),
@Manufacturer varchar(100)
AS
SET NOCOUNT ON
if not exists (SELECT ReagentId FROM LIMS_REAGENTS WHERE
[Name]=@Name)
INSERT INTO LIMS_REAGENTS ([Name], ProductNumber, Manufacturer)
VALUES (@Name, @ProductNumber, @Manufacturer)
else
UPDATE LIMS_REAGENTS SET
[Name] = @Name,
ProductNumber = @ProductNumber,
Manufacturer = @Manufacturer,
WHERE [Name] = @Name
SET NOCOUNT OFF
GO
This Stored Procedure updates a table in the database and in this case you don’t normally
need feedback, sp setting SET NOCOUNT ON at the top in the stored procedure is a good
idea. it is also good practice to SET NOCOUNT OFF at the bottom of the stored procedure.

66
11 Functions
With SQL and SQL Server you can use lots of built-in functions or you may create your own
functions. Here we will learn to use some of the most used built-in functions and in addition
we will create our own function.
11.1 Built-in Functions
SQL has many built-in functions for performing calculations on data.
We have 2 categories of functions, namely aggregate functions and scalar functions.
Aggregate functions return a single value, calculated from values in a column, while scalar
functions return a single value, based on the input value.
Aggregate functions - examples:
• AVG() - Returns the average value
• STDEV() - Returns the standard deviation value
• COUNT() - Returns the number of rows
• MAX() - Returns the largest value
• MIN() - Returns the smallest value
• SUM() - Returns the sum
• etc.
Scalar functions - examples:
• UPPER() - Converts a field to upper case
• LOWER() - Converts a field to lower case
• LEN() - Returns the length of a text field
• ROUND() - Rounds a numeric field to the number of decimals specified
• GETDATE() - Returns the current system date and time
• etc.
11.1.1 String Functions
Here are some useful functions used to manipulate with strings in SQL Server:

67 Functions
• CHAR
• CHARINDEX
• REPLACE
• SUBSTRING
• LEN
• REVERSE
• LEFT
• RIGHT
• LOWER
• UPPER
• LTRIM
• RTRIM
Read more about these functions in the SQL Server Help.
11.1.2 Date and Time Functions
Here are some useful Date and Time functions in SQL Server:
• DATEPART
• GETDATE
• DATEADD
• DATEDIFF
• DAY
• MONTH
• YEAR
• ISDATE
11.1.3 Mathematics and Statistics Functions
Here are some useful functions for mathematics and statistics in SQL Server:
• COUNT
• MIN, MAX
• COS, SIN, TAN
• SQRT
• STDEV
• MEAN
• AVG

68 Functions
11.1.4 AVG()
The AVG() function returns the average value of a numeric column.
Syntax:
SELECT AVG(column_name) FROM table_name
Example:
Given a GRADE table:
We want to find the average grade for a specific student:
select AVG(Grade) as AvgGrade from GRADE where StudentId=1
11.1.5 COUNT()
The COUNT() function returns the number of rows that matches a specified criteria.
The COUNT(column_name) function returns the number of values (NULL values will not be
counted) of the specified column:
SELECT COUNT(column_name) FROM table_name
The COUNT(*) function returns the number of records in a table:
SELECT COUNT(*) FROM table_name

69 Functions
select COUNT(*) as NumbersofCustomers from CUSTOMER
11.1.6 The GROUP BY Statement
Aggregate functions often need an added GROUP BY statement.
The GROUP BY statement is used in conjunction with the aggregate functions to group the
result-set by one or more columns.
Syntax
SELECT column_name, aggregate_function(column_name)
FROM table_name
WHERE column_name operator value
GROUP BY column_name
Example:
If we try the following:
select FirstName, MAX(AreaCode) from CUSTOMER
We get the following error message:
Column 'CUSTOMER.FirstName' is invalid in the select list because it is not contained in
either an aggregate function or the GROUP BY clause.
The solution is to use the GROUP BY:
select FirstName, MAX(AreaCode) from CUSTOMER
group by FirstName

70 Functions
11.1.7 The HAVING Clause
The HAVING clause was added to SQL because the WHERE keyword could not be used with
aggregate functions.
Syntax:
SELECT column_name, aggregate_function(column_name)
FROM table_name
WHERE column_name operator value
GROUP BY column_name
HAVING aggregate_function(column_name) operator value
We use the GRADE table as an example:
select * from GRADE
First we use the GROUP BY statement:
select CourseId, AVG(Grade) from GRADE
group by CourseId
While the following query:
select CourseId, AVG(Grade) from GRADE
group by CourseId
having AVG(Grade)>3

71 Functions
11.2 User-defined Functions
IN SQL, we may also create our own functions, so-called user-defined functions.
A user-defined function is a routine that accepts parameters, performs an action, such as a
complex calculation, and returns the result of that action as a value. The return value can
either be a scalar (single) value or a table. Use this statement to create a reusable routine
that can be used in other queries.
In SQL databases, a user-defined function provides a mechanism for extending the
functionality of the database server by adding a function that can be evaluated in SQL
statements. The SQL standard distinguishes between scalar and table functions. A scalar
function returns only a single value (or NULL), whereas a table function returns a (relational)
table comprising zero or more rows, each row with one or more columns.
Stored Procedures vs. Functions:
• Only functions can return a value (using the RETURN keyword).
• Stored procedures can use RETURN keyword but without any value being passed[1]
• Functions could be used in SELECT statements, provided they don’t do any data
manipulation and also should not have any OUT or IN OUT parameters.
• Functions must return a value, but for stored procedures this is not compulsory.
• A function can have only IN parameters, while stored procedures may have OUT or IN
OUT parameters.
• A function is a subprogram written to perform certain computations and return a
single value.
• A stored procedure is a subprogram written to perform a set of actions, and can
return multiple values using the OUT parameter or return no value at all.
User-defined functions in SQL are declared using the CREATE FUNCTION statement.
When we have created the function, we can use the function the same way we use built-in
functions.

72
12 Triggers
A database trigger is code that is automatically executed in response to certain events on a
particular table in a database.
Syntax for creating a Trigger:
CREATE TRIGGER <TriggerName> on <TableName>
FOR INSERT, UPDATE, DELETE
AS
… Create your Code here
GO
The Trigger will automatically be executed when data is inserted, updated or deleted in the
table as specified in the Trigger header.
INSERTED and DELETED:
Inside triggers we can use two special tables: the DELETED table and the INSERTED tables.
SQL Server automatically creates and manages these tables. You can use these temporary,

73 Triggers
memory-resident tables to test the effects of certain data modifications. You cannot modify
the data in these tables.
The DELETED table stores copies of the affected rows during DELETE and UPDATE
statements. During the execution of a DELETE or UPDATE statement, rows are deleted from
the trigger table and transferred to the DELETED table.
The INSERTED table stores copies of the affected rows during INSERT and UPDATE
statements. During an insert or update transaction, new rows are added to both the
INSERTED table and the trigger table. The rows in the INSERTED table are copies of the new
rows in the trigger table.
Example:
We will use the CUSTOMER table as an example:
We will create a TRIGGER that will check if the Phone number is valid when we insert or
update data in the CUSTOMER table. The validation check will be very simple, i.e., we will
check if the Phone number is less than 8 digits (which is normal length in Norway). If the
Phone number is less than 8 digits, the following message “Phone Number is not valid” be
written in place of the wrong number in the Phone column.
The TRIGGER becomes something like this:
FROM sysobjects
WHERE name = 'CheckPhoneNumber'
AND type = 'TR')
DROP TRIGGER CheckPhoneNumber
GO
CREATE TRIGGER CheckPhoneNumber ON CUSTOMER
FOR UPDATE, INSERT
AS
DECLARE
@CustomerId int,
@Phone varchar(50),
@Message varchar(50)
set nocount on
select @CustomerId = CustomerId from INSERTED
select @Phone = Phone from INSERTED

74 Triggers
set @Message = 'Phone Number ' + @Phone + ' is not valid'
if len(@Phone) < 8 --Check if Phone Number have less than 8 digits
update CUSTOMER set Phone = @Message where CustomerId =
@CustomerId
set nocount off
GO
We test the TRIGGER with the following INSERT INTO statement:
INSERT INTO CUSTOMER
(CustomerNumber, LastName, FirstName, AreaCode, Address, Phone)
VALUES
('1003', 'Obama', 'Barak', 51, 'Nevada', '4444')
The results become:
As you can see, the TRIGGER works as expected.
We try to update the Phone number to a valid number:
update CUSTOMER set Phone = '44444444' where CustomerNumber = '1003'
The results become:

75
13 Communication from
other Applications
A Database is a structured way to store lots of information. The information is stored in
different tables. “Everything” today is stored in databases.
Examples:
• Bank/Account systems
• Information in Web pages such as Facebook, Wikipedia, YouTube
• … lots of other examples
This means we need to be able to communicate with the database from other applications
and programming languages in order to insert, update or retrieve data from the database.
13.1 ODBC
ODBC (Open Database Connectivity) is a standardized interface (API) for accessing the
database from a client. You can use this standard to communicate with databases from
different vendors, such as Oracle, SQL Server, etc. The designers of ODBC aimed to make it
independent of programming languages, database systems, and operating systems.
We will use the ODBC Data Source Administrator:

76 Communication from other Applications
13.2 Microsoft Excel
Microsoft Excel has the ability to retrieve data from different data sources, including
different database systems. It is very simple to retrieve data from SQL Server into Excel since
Excel and SQL Server has the same vendor (Microsoft).

77 Communication from other Applications

78
14 References
My Blog: https://www.halvorsen.blog
Microsoft official SQL Server Web site - http://www.microsoft.com/sqlserver
SQL Server Books Online - http://msdn.microsoft.com/en-us/library/ms166020.aspx
SQL Server Help
w3shools.com - http://www.w3schools.com/sql
Wikipedia – Microsoft SQL Server - http://en.wikipedia.org/wiki/Microsoft_SQL_Server
Wikipedia - SQL - http://en.wikipedia.org/wiki/SQL
Wikipedia – Transact SQL - http://en.wikipedia.org/wiki/T-SQL

Structured Query Language

More Related Content

Similar to Structured Query Language (20)

Recently uploaded (20)

Structured Query Language