SOIL
&
PAINTS
Presented by :
Miss.Jayshree Katariya
M.sc.(F.S)1st Yr
DEFINITION
◦Soil is a mixture of organic
matter, minerals, gases, liquids,
and organisms that together
support life.
Soil is the unconsolidated outer layer of the Earth’s crust.
It appears in a variety of forms
(different textures, colour, structure and nutrient content)
There are
four main ingredients (fractions) that are
consistent with all types of soil:
mineral,
organic matter, water and air.
These four
fractions fall into two categories:
solid
(mineral and organic matter) and non solid (water and air).
SOIL COMPONENTS
◦ 1. Mineral
The largest component of soil is the mineral portion, which makes up
approximately 45% to 49% of the volume.
◦ 2. Water
Water is the second basic component of soil. Water can make up
approximately 2% to 50% of the soil volume. Water is important for
transporting nutrients to growing plants and soil organisms and for
facilitating both biological and chemical decomposition. Soil water
availability is the capacity of a particular soil to hold water that is
available for plant use.
◦ 3. Organic matter
Organic matter is the next basic component that is found in soils at levels
of approximately 1% to 5%. Organic matter is derived from dead plants
and animals and as such has a high capacity to hold onto and/or provide
the essential elements and water for plant growth
◦ 4. GASES
Gases or air is the next basic component of soil. Because air can occupy
the same spaces as water, it can make up approximately 2% to 50% of the
soil volume. Oxygen is essential for root and microbe respiration, which
helps support plant growth. Carbon dioxide and nitrogen also are important
for belowground plant functions such as for nitrogen-fixing bacteria
◦ 5. Microorganisms
Microorganisms are the final basic element of soils, and they are found in
the soil in very high numbers but make up much less than 1% of the soil
volume
SOIL FORMATION
SOIL HORIZONS
TYPES OF SOIL
◦ Sand :-
◦ Sand is gritty and consists of very small particles of rock and minerals.
...
◦ Silt :-
◦ Silt is a very fertile soil. ...
◦ Clay :-
◦ Clay is very fine grain soil with little air space.
◦ Loam :-
◦ is soil composed mostly of sand silt and a smaller amount of clay
SOIL ANALYSIS
Soil is the system which supplies plant with available nutrients
through the root. Physical and
◦ Chemical analysis of the soil are carried out to indicate the efficiency
of soil for supplying plants
◦ with nutrients in available forms as well as identification of the
factors affecting this efficiency in
◦ the soil. Therefore, besides perfect sampling in the field, soil samples
must be properly prepared
◦ and analyzed in order to reach the correct evaluation of the soil
nutritional status.
◦ Determination Of Mositure Content
◦ Principle:
◦ Hygroscopic water of air-dry soil is determined by heating in an oven at 105o
◦ C.
◦ Apparatus:
◦ 1- Electric oven with thermostate.
◦ 2- Desiccators with siccative.
◦ Procedure:
◦ 1- Weigh 5.00 g of air-dry soil < 2 mm into a perviously dried (at 105o
◦ C) and weighed
◦ weighing-dish with lid (a labelled aluminium dish).
◦ 2- Dry in an oven at 105o
◦ C with unfitted lid over-night.
◦ 3- Remove from oven, fit lid, cool in a desiccator for at least 30 minutes and reweigh. All
◦ weighings should be recorded to 3 decimal places
Particle Size Distribution
◦ Apparatus
◦ Soil dispersing stirrer: A high-speed electric stirrer with a cup receptacle.
◦ Hydrometer with Bouyoucos scale in g/L (ASTM 152H).
◦ Reagents
◦ A. Dispersing Solution
◦ Dissolve 40 g sodium hexametaphosphate [(NaPO3)13], and 10 g sodium
carbonate (Na2CO3) in DI water, and bring to 1-L volume with DI water. This
◦ solution deteriorates with time and should not be kept for more than 1 to 2
◦ weeks.
◦ B. Amyl Alcohol
◦ Procedure
◦ 1. Weigh 40 g air-dry soil (2-mm) into a 600-mL beaker.
◦ 2. Add 60-mL dispersing solution.
◦ 3. Cover the beaker with a watch-glass, and leave overnight.
◦ 4. Quantitatively transfer contents of the beaker to a soil-stirring cup, and
◦ fill the cup to about three-quarters with water.
◦ 5. Stir suspension at high speed for 3 minutes using the special stirrer.
◦ Shake the suspension overnight if no stirrer is available.
◦ 6. Rinse stirring paddle into a cup, and allow to stand for 1 minute.
◦ 7. Transfer suspension quantitatively into a 1-L calibrated cylinder (hydrom
◦ eter jar), and bring to volume with water.
◦ A. Determination of Blank
◦ • Dilute 60 mL dispersing solution to 1-L hydrometer jar with water.
◦ • Mix well, and insert hydrometer, and take hydrometer reading, Rb.
◦ • The blank reading must be re-determined for temperature changes of
◦ more than 2°C from 20°C.
◦B. Determination of Silt plus Clay
◦Mix suspension in the hydrometer jar, using a special
carefully,
◦withdraw the paddle, and immediately insert the
FORENSIC IMPORTANCE
◦ Forensic soil analysis is the use of soil science and other disciplines
(e.g. geochemistry and geology) to aid in criminal investigations.
◦ Each soil possesses unique properties that serve as identification
markers.
◦ This means investigators can trace and match soils to each other. For
example, clay embedded in the shoe treads of a criminal can be
traced back to a specific clay type found along a lake where a murder
victim was discovered.
◦ Each soil type has specific characteristics—like color, texture and
structure—that tell its history, formation and location of origin.
DEFINITION OF PAINTS
◦Paint is any liquid, liquefiable, or mastic composition that,
after application to a substrate in a thin layer, converts to
a solid film. It is most commonly used to protect, color, or
provide texture to objects
COMPOSITION
COMPOSITION OF PAINTS
There are four main components in a paint:
pigment, binder, liquid, and additive
BINDERS :
Is the main ingredient of paints. Binders are polymers forming a continuous film on the substrate surface.
Alkyd resins
Acrylic resins
Phenolic resins
Urethane resins
Epoxy resins
• SOLVENTS
• water is a medium where the binder, pigment and additives are
dispersed in molecular form or as colloidal dispersions
PIGMENT
Is a solid substance dispersed throughout the coating to impart
it a color, opacity.
Pigments may protect the substrate from UV light.
Pigments change the paint appearance
Additives
Are small amounts of substances modifying the Paint properties.
Examples of additives:
Dries
Uv-stabilzer
Anti-skinning agents
Texturizers
TYPES OF PAINTS
◦ WATER-BASED PAINTS
◦ The majority of wall paint sold today is water-based, primarily because of its ease of use.
◦ OIL-BASED PAINTS
◦ Oil-based paint can be used on almost all surfaces, and is praised for its high durability and rich finish.
◦ Matte paint:
◦ is the least reflective sheen available
◦ has a velvety texture
◦ helps hides imperfections in walls and ceilings
◦ Eggshell and satin paint (satin is slightly glossier than eggshell):
◦ have some reflectivity
◦ offer improved durability
◦ are frequently used in demanding
◦ Semi-gloss and gloss paint:
◦ great for kitchens, doors, window trim, accent walls, and bathrooms
◦ are the most reflective sheens
ANALYSTS OF PAINTS
Paint samples can be difficult to collect from the scene of a crime.
They can be found on a variety of objects, including clothing, vehicles, and tools.
Micro-spectrophotometryin its reflectance mode will help determine the nature of the pigments
Infra red spectrometry will determine its organic components.
X-ray powder diffraction is useful for determining the identity of any microcrystalline components. Because
paint in the form of a chip is solid, a specialized technique called pyrolysis
Gas chromatography might be used to determine its composition.
FORENSIC IMPORTANCE
◦Paint chips or remnants can reveal a significant amount of
information during forensic investigations.
◦ Paint that is located at a crime scene is referred to as trace
evidence, because it has been transferred from a main source
to the scene of a crime. ...
◦ This is usually done by scraping or peeling off
the paint evidence.
THANK YOU !

Study of Soil and Paint

  • 1.
  • 2.
    DEFINITION ◦Soil is amixture of organic matter, minerals, gases, liquids, and organisms that together support life.
  • 3.
    Soil is theunconsolidated outer layer of the Earth’s crust. It appears in a variety of forms (different textures, colour, structure and nutrient content) There are four main ingredients (fractions) that are consistent with all types of soil: mineral, organic matter, water and air. These four fractions fall into two categories: solid (mineral and organic matter) and non solid (water and air).
  • 5.
    SOIL COMPONENTS ◦ 1.Mineral The largest component of soil is the mineral portion, which makes up approximately 45% to 49% of the volume. ◦ 2. Water Water is the second basic component of soil. Water can make up approximately 2% to 50% of the soil volume. Water is important for transporting nutrients to growing plants and soil organisms and for facilitating both biological and chemical decomposition. Soil water availability is the capacity of a particular soil to hold water that is available for plant use.
  • 6.
    ◦ 3. Organicmatter Organic matter is the next basic component that is found in soils at levels of approximately 1% to 5%. Organic matter is derived from dead plants and animals and as such has a high capacity to hold onto and/or provide the essential elements and water for plant growth ◦ 4. GASES Gases or air is the next basic component of soil. Because air can occupy the same spaces as water, it can make up approximately 2% to 50% of the soil volume. Oxygen is essential for root and microbe respiration, which helps support plant growth. Carbon dioxide and nitrogen also are important for belowground plant functions such as for nitrogen-fixing bacteria
  • 7.
    ◦ 5. Microorganisms Microorganismsare the final basic element of soils, and they are found in the soil in very high numbers but make up much less than 1% of the soil volume
  • 8.
  • 9.
  • 10.
  • 11.
    ◦ Sand :- ◦Sand is gritty and consists of very small particles of rock and minerals. ... ◦ Silt :- ◦ Silt is a very fertile soil. ... ◦ Clay :- ◦ Clay is very fine grain soil with little air space. ◦ Loam :- ◦ is soil composed mostly of sand silt and a smaller amount of clay
  • 12.
    SOIL ANALYSIS Soil isthe system which supplies plant with available nutrients through the root. Physical and ◦ Chemical analysis of the soil are carried out to indicate the efficiency of soil for supplying plants ◦ with nutrients in available forms as well as identification of the factors affecting this efficiency in ◦ the soil. Therefore, besides perfect sampling in the field, soil samples must be properly prepared ◦ and analyzed in order to reach the correct evaluation of the soil nutritional status.
  • 13.
    ◦ Determination OfMositure Content ◦ Principle: ◦ Hygroscopic water of air-dry soil is determined by heating in an oven at 105o ◦ C. ◦ Apparatus: ◦ 1- Electric oven with thermostate. ◦ 2- Desiccators with siccative. ◦ Procedure: ◦ 1- Weigh 5.00 g of air-dry soil < 2 mm into a perviously dried (at 105o ◦ C) and weighed ◦ weighing-dish with lid (a labelled aluminium dish). ◦ 2- Dry in an oven at 105o ◦ C with unfitted lid over-night. ◦ 3- Remove from oven, fit lid, cool in a desiccator for at least 30 minutes and reweigh. All ◦ weighings should be recorded to 3 decimal places
  • 14.
    Particle Size Distribution ◦Apparatus ◦ Soil dispersing stirrer: A high-speed electric stirrer with a cup receptacle. ◦ Hydrometer with Bouyoucos scale in g/L (ASTM 152H). ◦ Reagents ◦ A. Dispersing Solution ◦ Dissolve 40 g sodium hexametaphosphate [(NaPO3)13], and 10 g sodium carbonate (Na2CO3) in DI water, and bring to 1-L volume with DI water. This ◦ solution deteriorates with time and should not be kept for more than 1 to 2 ◦ weeks. ◦ B. Amyl Alcohol
  • 15.
    ◦ Procedure ◦ 1.Weigh 40 g air-dry soil (2-mm) into a 600-mL beaker. ◦ 2. Add 60-mL dispersing solution. ◦ 3. Cover the beaker with a watch-glass, and leave overnight. ◦ 4. Quantitatively transfer contents of the beaker to a soil-stirring cup, and ◦ fill the cup to about three-quarters with water. ◦ 5. Stir suspension at high speed for 3 minutes using the special stirrer. ◦ Shake the suspension overnight if no stirrer is available. ◦ 6. Rinse stirring paddle into a cup, and allow to stand for 1 minute. ◦ 7. Transfer suspension quantitatively into a 1-L calibrated cylinder (hydrom ◦ eter jar), and bring to volume with water. ◦ A. Determination of Blank ◦ • Dilute 60 mL dispersing solution to 1-L hydrometer jar with water. ◦ • Mix well, and insert hydrometer, and take hydrometer reading, Rb. ◦ • The blank reading must be re-determined for temperature changes of ◦ more than 2°C from 20°C.
  • 16.
    ◦B. Determination ofSilt plus Clay ◦Mix suspension in the hydrometer jar, using a special carefully, ◦withdraw the paddle, and immediately insert the
  • 17.
    FORENSIC IMPORTANCE ◦ Forensicsoil analysis is the use of soil science and other disciplines (e.g. geochemistry and geology) to aid in criminal investigations. ◦ Each soil possesses unique properties that serve as identification markers. ◦ This means investigators can trace and match soils to each other. For example, clay embedded in the shoe treads of a criminal can be traced back to a specific clay type found along a lake where a murder victim was discovered. ◦ Each soil type has specific characteristics—like color, texture and structure—that tell its history, formation and location of origin.
  • 18.
    DEFINITION OF PAINTS ◦Paintis any liquid, liquefiable, or mastic composition that, after application to a substrate in a thin layer, converts to a solid film. It is most commonly used to protect, color, or provide texture to objects
  • 19.
  • 20.
    COMPOSITION OF PAINTS Thereare four main components in a paint: pigment, binder, liquid, and additive BINDERS : Is the main ingredient of paints. Binders are polymers forming a continuous film on the substrate surface. Alkyd resins Acrylic resins Phenolic resins Urethane resins Epoxy resins
  • 21.
    • SOLVENTS • wateris a medium where the binder, pigment and additives are dispersed in molecular form or as colloidal dispersions PIGMENT Is a solid substance dispersed throughout the coating to impart it a color, opacity. Pigments may protect the substrate from UV light. Pigments change the paint appearance
  • 22.
    Additives Are small amountsof substances modifying the Paint properties. Examples of additives: Dries Uv-stabilzer Anti-skinning agents Texturizers
  • 23.
    TYPES OF PAINTS ◦WATER-BASED PAINTS ◦ The majority of wall paint sold today is water-based, primarily because of its ease of use. ◦ OIL-BASED PAINTS ◦ Oil-based paint can be used on almost all surfaces, and is praised for its high durability and rich finish. ◦ Matte paint: ◦ is the least reflective sheen available ◦ has a velvety texture ◦ helps hides imperfections in walls and ceilings
  • 24.
    ◦ Eggshell andsatin paint (satin is slightly glossier than eggshell): ◦ have some reflectivity ◦ offer improved durability ◦ are frequently used in demanding ◦ Semi-gloss and gloss paint: ◦ great for kitchens, doors, window trim, accent walls, and bathrooms ◦ are the most reflective sheens
  • 25.
    ANALYSTS OF PAINTS Paintsamples can be difficult to collect from the scene of a crime. They can be found on a variety of objects, including clothing, vehicles, and tools. Micro-spectrophotometryin its reflectance mode will help determine the nature of the pigments Infra red spectrometry will determine its organic components. X-ray powder diffraction is useful for determining the identity of any microcrystalline components. Because paint in the form of a chip is solid, a specialized technique called pyrolysis Gas chromatography might be used to determine its composition.
  • 26.
    FORENSIC IMPORTANCE ◦Paint chipsor remnants can reveal a significant amount of information during forensic investigations. ◦ Paint that is located at a crime scene is referred to as trace evidence, because it has been transferred from a main source to the scene of a crime. ... ◦ This is usually done by scraping or peeling off the paint evidence.
  • 27.