TLE-IA Consumer Electronics Servicing Curriculum Guide
21 likes12,005 views
This document outlines a curriculum for an exploratory and introductory course in consumer electronics servicing for grades 7 and 8 students, and a specialization course for grade 9 students. The courses cover key competencies including using tools, performing calculations, interpreting technical drawings, observing safety procedures, and more. The grade 9 course focuses on assembling and disassembling consumer electronics and maintaining appliances. Both courses aim to provide an understanding of concepts, skills, and career opportunities in the field of consumer electronics servicing.
TLE-IA Consumer Electronics Servicing Curriculum Guide
- 1. K to 12 BASIC EDUCATION CURRICULUM TECHNOLOGY AND LIVELIHOOD EDUCATION K to 12 TLE Industrial Arts – Consumer Electronics Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 1 of 15 INDUSTRIAL ARTS – CONSUMER ELECTRONICS SERVICING NCII Grade 7/Grade 8 (Exploratory) Course Description: This is an exploratory and introductory course which leads to a Consumer Electronics Serving National Certificate Level II (NCII). It covers five common competencies that the Grade 7/Grade 8 Technology and Livelihood Education (TLE) student ought to possess: (1) using tools, equipment and paraphernalia; (2) performing mensuration and calculation; (3) practicing Occupational Health and Safety (OHS) procedures; (4) maintaining tools, equipment and paraphernalia; and (5) interpreting technical drawing and plans. The preliminaries of this exploratory course include the following: (1) discussion on the relevance of the course, 2) explanation of key concepts relative to the course, and (3) exploration of career opportunities. CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE Introduction 1. Basic concepts in electronics servicing 2. Relevance of the course 3. Career opportunities The learner demonstrates an understanding of the basic concepts and underlying theories in consumer electronics servicing. The learner independently demonstrates an common competencies in electronics servicing as prescribed by TESDA Training Regulations. 1. Explain basic concepts in electronics servicing 2. Discuss the relevance of the course 3. Explore career opportunities in electronics servicing PERSONAL ENTREPRENEURIAL COMPETENCIES AND SKILLS (PeCS) 1. Assessment of Personal Entrepreneurial Competencies and Skills (PeCS) vis-à-vis a practicing entrepreneur/employee 1.1 Characteristics 1.2 Attributes 1.3 Lifestyle 1.4 Skills 1.5 Traits 2. Analysis of one’s PeCS The learner demonstrates an understanding of one’s Personal Entrepreneurial Competencies and Skills (PeCS). The learner recognizes his/her Personal Entrepreneurial Competencies and Skills (PeCS) and prepares a list of PeCS of a practitioner/entrepreneur in consumer electronics servicing. LO 1. Recognize Personal Entrepreneurial Competencies and Skills (PeCS) needed in consumer electronics servicing 1.1 Assess one’s PeCS: characteristics, attributes, lifestyle, skills, traits 1.2 Assess practitioner’s: characteristics, attributes, lifestyle, skills, traits 1.3 Compare one’s PeCS with those of a practitioner /entrepreneur TLE_PECS7/8-0k-1
- 2. K to 12 BASIC EDUCATION CURRICULUM TECHNOLOGY AND LIVELIHOOD EDUCATION K to 12 TLE Industrial Arts – Consumer Electronics Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 2 of 15 CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE ENVIRONMENT AND MARKET (EM) 1. Key concepts of Environment and Market 2. Products & services available in the market 3. Differentiation of products and services 4. Customers and their buying habits 5. Competition in the market 6. SWOT Analysis The learner demonstrates an understanding of the concepts environment and market and how they relate with a career choice in consumer electronics servicing. The learner independently generates a business idea based on the analysis of environment and market in consumer electronics servicing. LO 1. Generate a business idea that relates with a career choice in Consumer Electronics Servicing 1.1 Conduct SWOT analysis 1.2 Identify the different products/services available in the market 1.3 Compare different products/services in the consumer electronics servicing business 1.4 Determine profile of potential customers 1.5 Determine profile of potential competitors 1.6 Generate potential business ideas based on the SWOT analysis TLE_EM7/8-0k-1 LESSON 1: USE HAND TOOLS (UT) 1. Electronic hand tools and test equipment The learner demonstrates an understanding of the underlying principles in the use of electronic hand tools. The learner independently uses the electronic hand tools. LO1. Plan for tasks to be undertaken 1.1 Select the appropriate hand tools for the job/task LO2. Prepare hand tools 2.1 Check hand tools for proper operation and safety LO3. Use appropriate hand tools and test instruments 3.1 Apply the appropriate hand tool for the given tasks TLE_IAES7/8UT-0a-1 TLE_IAES7/8UT-0a-2 TLE_IAES7/8UT-0b-3 LESSON 2: PERFORM MENSURATION AND CALCULATION (MC)
- 3. K to 12 BASIC EDUCATION CURRICULUM TECHNOLOGY AND LIVELIHOOD EDUCATION K to 12 TLE Industrial Arts – Consumer Electronics Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 3 of 15 CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE 1. Mutlitester 2. Resistor color coding The learner demonstrates an understanding of the underlying principles in measurements and calculations. The learner independently performs accurate measurements and calculation based on given tasks. LO1. Select measuring instrument 1.1 Select appropriate measuring instruments for a specific task. LO2. Carry out measurement and calculation 2.1 Measure the resistance using a multitester 2.2 Compute for the value of resistors based on its color code TLE_IAES7/8MC-0c-1 TLE_IAES7/8MC-0d-2 LESSON 3: PREPARE AND INTERPRET TECHNICAL DRAWINGS (ID) 1. Electronics components and electronic symbols 2. Schematic diagrams The learner demonstrates an understanding of the concepts in interpreting simple technical drawings and electronics diagram. The learner independently reads and interprets simple technical drawings and diagrams based on IEE (Institution of Electrical Engineers) standards. LO1. Prepare the identified electronic component from the identified electronic diagrams 1.1 Describe the electronic component being asked based on the electronic diagram 1.2 Identify the proper electronic component or its equivalent value for the given electronic diagram LO2. Interpret technical drawing. 2.1 Interpret working plans and electronic diagrams TLE_IAES7/8ID-0e-1 TLE_IAES7/8ID-0f-2 LESSON 4: OBSERVING OCCUPATIONAL HEALTH AND SAFETY (OS)
- 4. K to 12 BASIC EDUCATION CURRICULUM TECHNOLOGY AND LIVELIHOOD EDUCATION K to 12 TLE Industrial Arts – Consumer Electronics Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 4 of 15 CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE 1. Personal Protective Equipment (PPE) 2. Safety in the workplace The learner demonstrates an understanding of the underlying principles in occupational health and safety procedures. The learner independently prepares occupational health and safety checklist being applied in industries. LO 1. Identify health hazards and occupational risks 1.1 List down the different health hazards and risks found in the workplace 1.2 Discuss the effects of the health hazards and occupational risks LO 2. Observe occupational health and safety practices 2.1 Prepare checklist on observations of occupational health and safety practices TLE_IAES7/8OS-0g-1 TLE_IAES7/8OS-0h-2 LESSON 5: MAINTAIN HAND TOOLS AND EQUIPMENT (MT) 1. Maintenance of electronic tools and test instruments The learner demonstrates an understanding of the concepts in the maintenance of electronic hand tools and test instruments. The learner independently performs maintenance of electronic hand tools and test instruments based on industry standards. LO 1. Maintain hand tools 1.1 Check and clean tools and test instruments after each use 1.2 Store hand tools safely in appropriate locations based on manufacturer’s specifications or standard operating procedure LO 2. Perform preventive maintenance of tools 2.1 Conduct preventive maintenance TLE_IAES7/8MT-0i-1 TLE_IAES7/8MT-0j-2
- 5. K to 12 BASIC EDUCATION CURRICULUM TECHNOLOGY AND LIVELIHOOD EDUCATION K to 12 TLE Industrial Arts – Consumer Electronics Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 5 of 15 INDUSTRIAL ARTS – CONSUMER ELECTRONICS SERVICING NCII Grade 9 (Specialization) Course Description: This is a standards based curriculum leading to a TESDA Qualification Standard for a Consumer Electronics Servicing National Certificate Level I (N II). It covers two (2) core competencies that the Grade 9 student should acquire: (1) assembling and disassembling of consumer electronic product and system, and 2) maintaining and repairing electronically controlled domestic appliances. The preliminaries of this course include the following: (1) discussion on the relevance of the course, (2) explanation of key concepts relative to the course, and 3) exploration of career opportunities. CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE Introduction: 1. Core concepts in Electronics Servicing 2. Relevance of the course 3. Employment /Business opportunities The learner demonstrates an understanding of the basic concepts and underlying theories in consumer Eelectronics servicing. The learner independently demonstrates an understanding of the core competencies in electronics servicing as prescribed by TESDA Training Regulations. 1. Explain core concepts in electronics servicing. 2. Discuss relevance of the course 3. Explore opportunities for employment/business PERSONAL ENTREPRENEURIAL COMPETENCIES (PeCS) 1. Assessment of learner’s Personal Competencies and Skills (PeCS) vis-à-vis PeCS of a practicing entrepreneur/ employee in locality/town. 1.1 Characteristics 1.2 Attributes 1.3 Lifestyle 1.4 Skills 1.5 Traits 2. Analysis of one’s PeCS 3. Align, strengthen and develop one’s PeCS based on the results The learner demonstrates an understanding of one’s PeCS in consumer electronics Servicing. The learner recognizes his/her PeCS and prepares an activity plan that aligns with the PeCS of a practitioner/entrepreneur in consumer electronics Servicing. LO 1. Recognize Personal Entrepreneurial Competencies and Skills (PeCS) needed in Consumer electronics Servicing 1.1 Assess one’s PeCS: characteristics, attributes, lifestyle, skills, traits 1.2 Assess practitioner’s: characteristics, attributes, lifestyle, skills, traits 1.3 Compare one’s PeCS with those of a practitioner /entrepreneur 1.4 Align one’s PeCS with those of a practitioner/entrepreneur TLE_PECS9-Ik-1
- 6. K to 12 BASIC EDUCATION CURRICULUM TECHNOLOGY AND LIVELIHOOD EDUCATION K to 12 TLE Industrial Arts – Consumer Electronics Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 6 of 15 CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE ENVIRONMENT AND MARKET (EM) Market (Town) 1. Key concepts of Market 2. Players in the Market (Competitors) 3. Products & services available in the market The learner demonstrates an understanding of the concepts environment and market in the consumer electronics servicing field, particularly in one’s town/municipality. The learner independently creates a business vicinity map reflective of the potential consumer electronics servicing market within the locality/town. LO 1. Recognize and understand the market in consumer electronics servicing 1.1 Identify the players/ competitors within the town 1.2 Identify the different products/services available in the market TLE_EM9-Ik-1 Market (Customer) 4. Key concepts of Identifying and Understanding the Consumer 5. Consumer Analysis through: 5.1 Observation 5.2 Interviews 5.3 Focus group discussion (FGD) 5.4 Survey LO 2. Recognize the potential customer/market in Consumer electronics Servicing 2.1 Identify profile of potential customers 2.2 Identify the customer’s needs and wants through consumer analysis 2.3 Conduct consumer/market analysis TLEEM9-IIk-2 6. Generating Business Idea 6.1 Key concepts of Generating Business Ideas 6.2 Knowledge & Skills, Passions, Interests 6.3 New application 6.4 Irritants 6.5 Striking ideas (new concept) 6.7 Serendipity Walk LO 3. Create new business ideas in Consumer electronics Servicing. business by using various techniques 3.1 Explore ways of generating business ideas from one’s own characteristics/attributes 3.2 Generate business ideas using product innovation from irritants, trends and emerging needs 3.3 Generate business ideas using Serendipity Walk TLE_EM9-IIIk- IVk-3
- 7. K to 12 BASIC EDUCATION CURRICULUM TECHNOLOGY AND LIVELIHOOD EDUCATION K to 12 TLE Industrial Arts – Consumer Electronics Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 7 of 15 CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE ASSEMBLE AND DISASSEMBLE CONSUMER ELECTRONIC PRODUCT AND SYSTEM (40) (AD) AC/DC Power Supply 1. Tools, equipment and materials 2. OH&S policies and procedure The learner demonstrates an understanding of the principles in AC/DC power supply. The learner independently assembles AC/DC power supply in accordance with manufacturer’s specification. LO 1. Prepare Tools And Materials For Assembly 1.1 Check required tools, equipment and materials 1.2 Prepare tools and materials according to job requirements TLE_IAES9AD-Ia- e-1 3. Soldering and Soldering processes LO 2. Solder/ Desolder Components To The Board 3.1 Perform soldering and desoldering processes 3.2 Check soldered products in accordance with quality standards TLE_IAES9-If-j-2 4. Assembling and disassembling processes LO 3. Assemble/ Disassemble Boards 4.1 Perform assembling and disassembling processes 4.2 Observe safety procedure in assembling and disassembling boards 4.3 Check assembled product in accordance with quality standards TLE_IAES9AD-IIa- e-3 5. Techniques on actual product assembly based on service manuals 6. Product quality standards based on service manual LO 4. Test And Inspect Assembled Products 4.1 Test finished products in accordance with standard operating procedure 4.2 Document completed work 4.3 Perform proper housekeeping (5S) TLE_IAES9AD-IIf- j-4
- 8. K to 12 BASIC EDUCATION CURRICULUM TECHNOLOGY AND LIVELIHOOD EDUCATION K to 12 TLE Industrial Arts – Consumer Electronics Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 8 of 15 CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE MAINTAIN AND REPAIR ELECTRONICALLY CONTROLLED DOMESTIC APPLIANCES (80) (MR) Servicing electronically- controlled domestic appliances with motor and with heating elements 1. Electronically-controlled domestic appliances 2. Service manuals 3. Tools, materials and test instruments The learner demonstrates an understanding of the concepts in maintaining and repairing appliances with motor and with heating element: 1. blender 2. electric fan The learner independently maintains and repairs appliances with motor and with heating element: 1. blender 2. electric fan LO 1. Prepare Unit, Tools, Equipment And Workplace For Maintenance/Repair 1.1 Prepare necessary tools, test instruments and personal protective equipment in line with job requirements 1.2 Acquire service manuals and service information required for repair/maintenance as manufacturer’s specifications 1.3 Conduct complete check-up of electronically-controlled domestic appliances 1.4 Document the identified defects based on check-up conducted TLE_IAES9MR- IIIa-j- 4. Pre-testing procedure in accordance with the manufacturer’s manual 5. Steps in testing components 6. Responsible persons LO 2. Diagnose faults of electronically- controlled domestic appliances. 2.1 Observe systematic pre-testing procedure in accordance with manufacturer’s instructions 2.2 Check and isolate circuits using specified testing procedure 2.3 Document results of diagnosis and testing accurately and completely within the specified timeframe 2.4 Explain identified defects and faults based on the result of diagnosis and testing 2.5 Provide data/information regarding the status and serviceability of the unit as per procedure TLE_IAES9MR- IIIa-j-2 7. Personal protective equipment (PPE) 8. Troubles and possible remedies 9. Soldering and desoldering LO 3. Maintain/Repair Appliances 3.1 Use PPE in accordance with OHS practices 3.2 Perform repair activity within the required timeframe 3.3 Observe safety precautions in handling the TLE_IAES9MR- IVa-e-3
- 9. K to 12 BASIC EDUCATION CURRICULUM TECHNOLOGY AND LIVELIHOOD EDUCATION K to 12 TLE Industrial Arts – Consumer Electronics Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 9 of 15 CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE process 10. Care and extreme precaution in handling the unit/product as per procedure unit/product as per standard operating procedure 3.4 Replace defective parts/ components with identical or recommended appropriate equivalent ratings 3.5 Solder/mount repaired or replaced parts/components in accordance with industry standards 3.6 Clean unit in accordance with standard operating procedure 11. Procedure of reassembling repaired units according to procedure LO 4. Reassemble And Test Repaired Appliances 4.1 Perform final test for reassembled units in conformity with manufacturer’s specifications TLE_IAES9MR-IVf- j-4
- 10. K to 12 BASIC EDUCATION CURRICULUM TECHNOLOGY AND LIVELIHOOD EDUCATION K to 12 TLE Industrial Arts – Consumer Electronics Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 10 of 15 Grade 10 (Specialization) Course Description: This is a standards based curriculum leading to a TESDA Qualification Standard for a Consumer electronics Servicing National Certificate Level I (N II). It covers the core competency of maintaining and repairing electronically-controlled domestic appliances that the Grade 10 student should acquire. The preliminaries of this course include the following: (1) discussion on the relevance of the course, (2) explanation of key concepts relative to the course, and (3) exploration of career opportunities. CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE Introduction: 1. Core concepts in Electronics Servicing 2. Relevance of the course 3. Employment /business opportunities The learner demonstrates an understanding of the basic concepts and underlying theories in consumer electronics servicing. The learner independently demonstrates an understanding of the core competency in electronics servicing as prescribed by TESDA Training Regulations. 1. Explain core concepts in electronics servicing 2. Discuss relevance of the course 3. Explore opportunities for employment/business PERSONAL ENTREPRENEURIAL COMPETENCIES (PeCS) 1. Assessment of learner’s Personal Competencies and Skills (PeCS) vis-à-vis PeCS of a practicing entrepreneur/employee in a province. 1.1 Characteristics 1.2 Attributes 1.3 Lifestyle 1.4 Skills 1.5 Traits 2. Analysis of PeCS compared to the PeCS of a practitioner 3. Strengthening and further development of one’s PeCS The learner demonstrates an understanding of one’s Personal Competencies and Skills (PeCS) in Consumer Electronics Servicing. The learner independently creates a plan of action that strengthens/ further develops one’s PeCS in Consumer Electronics Servicing. LO 1. Develop and strengthen personal competencies and skills (PeCS) needed Consumer Electronics Servicing 1.1 Identify areas for improvement, development and growth 1.2 Align one’s PeCS according to his/her business/career choice 1.3 Create a plan of action that ensures success of his/her business/career choice TLE_PECS10-Ik-8 Prerequisite: Grade 9 Consumer Electronics Servicing
- 11. K to 12 BASIC EDUCATION CURRICULUM TECHNOLOGY AND LIVELIHOOD EDUCATION K to 12 TLE Industrial Arts – Consumer Electronics Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 11 of 15 CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE ENVIRONMENT AND MARKET (EM) 1. Product Development 2. Key concepts of developing a product 3. Finding Value 4. Innovation 4.1 Unique Selling 4.2 Proposition (USP) The learner demonstrates an understanding of environment and market in Consumer Electronics Servicing in one’s town/municipality. The learner independently creates a business vicinity map reflective of the potential Consumer Electronics Servicing market within the locality/town. LO 1. Develop a product/ service in Consumer Electronics Servicing 1.1 Identify what is of “Value” to the customer 1.2 Identify the customer 1.3 Explain what makes a product unique and competitive 1.4 Apply creative and innovative techniques to develop marketable product 1.5 Employ a Unique Selling Proposition (USP) to the product/service TLE_EM10-Ik-IIk-1 5. Selecting a Business Idea 6. Key concepts in Selecting a Business Idea 6.1 Criteria 6.2 Techniques LO 2. Select a business idea based on the criteria and techniques set 2.1 Enumerate various criteria and steps in selecting a business idea 2.2 Apply the criteria/steps in selecting a viable business idea 2.3 Determine a business idea based on the criteria/techniques set TLE_EM10-IIIk-2 7. Branding LO 3. Develop a brand for the product 3.1 Identify the benefits of having a good brand 3.2 Enumerate recognizable brands in the town/province 3.3 Enumerate the criteria for developing a brand 3.4 Generate a clear appealing product brand TLE_EM10-IVk-3
- 12. K to 12 BASIC EDUCATION CURRICULUM TECHNOLOGY AND LIVELIHOOD EDUCATION K to 12 TLE Industrial Arts – Consumer Electronics Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 12 of 15 CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE MAINTAIN AND REPAIR ELECTRONICALLY CONTROLLED DOMESTIC APPLIANCES (80) MR Servicing electronically- controlled domestic appliances with motor and with heating elements 1. Electronically controlled domestic appliances 2. Service manuals 3. Tools, materials and test instruments The learner demonstrates an understanding of the concepts in maintaining and repairing appliances with motor and with a heating element: 1. washing machine 2. flat iron 3. microwave oven 4. rice cooker The learner independently maintains and repairs appliances with motor and with a heating element: 1. washing machine 2. flat iron 3. microwave oven 4. rice cooker LO1. Prepare unit, tools, equipment and workplace for maintenance/repair 1.1 Prepare necessary tools, test instruments and personal protective equipment in line with job requirements 1.2 Acquire service manuals and service information required for repair/maintenance as manufacturer’s specifications 1.3 Conduct complete check-up of electronically-controlled domestic appliances 1.4 Document the identified defects based on check-up conducted LE_IAES10MR-Ia-j- 1 4. Pre-testing procedure in accordance with the manufacturer’s manual. 5. Steps in testing components 6. Responsible persons LO2. Diagnose faults of electronically-controlled domestic appliances. 2.1 Observe systematic pre-testing procedure in accordance with manufacturer’s instructions 2.2 Check and isolate circuits using specified testing procedure 2.3 Document results of diagnosis and testing accurately and completely within the specified timeframe 2.4 Explain identified defects and faults based on the result of diagnosis and testing 2.5 Provide data/information regarding the status and serviceability of the unit as per procedure TLE_IAES10MR-Ia- j-2
- 13. K to 12 BASIC EDUCATION CURRICULUM TECHNOLOGY AND LIVELIHOOD EDUCATION K to 12 TLE Industrial Arts – Consumer Electronics Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 13 of 15 CONTENT CONTENT STANDARD PERFORMANCE STANDARD LEARNING COMPETENCIES CODE 7. Personal protective equipment (PPE) 8. Troubles and possible remedies 9. Soldering and desoldering process 10. Care and extreme precaution in handling the unit/product as per procedure LO3 Maintain/Repair Appliances 3.1 Use PPE in accordance with OHS practices 3.2 Perform repair activity within the required timeframe 3.3 Observe safety precautions in handling the unit/product as per standard operating procedure 3.4 Replace defective parts/ components with identical parts or recommended parts with equivalent ratings 3.5 Solder/mount repaired or replaced parts/components in accordance with industry standards 3.6 Clean unit in accordance with standard operating procedure TLE_IAES10MR-IIa- IVj-3 11. Procedure of reassembling repaired units according to procedure LO4 Reassemble and test repaired appliances 4.1 Perform final test for reassembled units in conformity with manufacturer’s specifications TLE_IAES10MR-IIa- IVj-4
- 14. K to 12 BASIC EDUCATION CURRICULUM TECHNOLOGY AND LIVELIHOOD EDUCATION K to 12 TLE Industrial Arts – Consumer Electronics Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 14 of 15 GLOSSARY
- 15. K to 12 BASIC EDUCATION CURRICULUM TECHNOLOGY AND LIVELIHOOD EDUCATION K to 12 TLE Industrial Arts – Consumer Electronics Servicing Curriculum Guide December 2013 *LO – Learning Outcome Page 15 of 15 Code Book Legend Sample: TLE_PECS7/8-0k-1 LEGEND SAMPLE First Entry Learning Area and Strand/ Subject or Specialization Technology and Livelihood Education_Industrial Arts Consumer Electronics Servicing TLE_PE CS 7/8 Grade Level Grade 7/8 Uppercase Letter/s Domain/Content/ Component/ Topic Personal Entrepreneurial Competencies and Skills PECS - Roman Numeral *Zero if no specific quarter Quarter No Specific Quarter 0 Lowercase Letter/s *Put a hyphen (-) in between letters to indicate more than a specific week Week Week Eleven k - Arabic Number Competency Recognize PECS needed in consumer electronics servicing 1 DOMAIN/ COMPONENT CODE Personal Entrepreneurial Skills PECS Environment and Marketing EM Use and Maintain Tools and Equipment UT Perform Estimation and Basic Calculation MC Interpret Plans and Drawings ID Maintain Hand Tools and Equipment MT Practice Heath and Safety Procedure OS Assemble and Dissemble Consumer Electronic Product and System AD Maintain and Repair Electronically Controlled Domestic Appliances MR