Wrinkle finish on denim by resin treatment: A Review

AASCIT Communications
Volume 2, Issue 3
May 10, 2015 online
ISSN: 2375-3803
Wrinkle Finish on Denim by Resin Treatment:
A Review
Elias Khalil Department of Textile Engineering, World University of Bangladesh, Dhaka, Bangladesh
Mazedul Islam Department of Textile Engineering, Dhaka University of Engineering and Technology, Gazipur,
Bangladesh
Keywords
Wrinkle Finish, Resin Application, Denim Garments, Curing
owadays, fashion in clothing is unimaginable without denim garment with a numerous effect. Various types of dry and wet
process are used to make these effect. In this article, 3D/crinkle effect by creating wrinkles on the denim garments
preceded by resin application is discussed. This effect gives vintage look as well as add value to the garments though having
possibility of decreasing tearing strength.
Introduction
Garment finishing is one of the finishing methods applied on garment, with the use of new technologies and equipment enables
to obtain the desired results [1]. For finishing of denim garments, a range of treatment methods such as enzymatic treatment [2-4],
bleaching treatment [5-6], acid treatment [7], silicone treatment [8] etc. are used widely. They all are aimed at new possible
effects of fabric appearance. Particularly the dry finishing creates many effects on denim fabric, it will stimulate the customers to
buy, and also it increases the market potential of the denim market [9]. Resin & its use in denim garments industry to create
unique & vintage looks (crinkle effect) which add value to denim garments & improves it salability in market. In 80’s, resin being
used to give non press, iron free trousers & now it is being used in denims to make wrinkles & creases to look natural vintage
which stays after multiple home laundries [10].
Wrinkle and Resins
A wrinkle, also known as a rhytide, is a fold, ridge or crease in the cloth or garments. It is the fabric deformations based on its
viscoelastic properties, meaning a slight depression in the smoothness of a surface [11-12, 16].Wrinkles give fabric a vintage and
aged appearance. The wrinkled-jeans look is created with chemicals and machines that manipulate the denim fabric and wrinkle
it in the desired areas [13].Some wrinkle effects on denims are shown in figure 1.
Figure 1. Wrinkle effect on denims.
N

ISSN: 2375-3803 83
Resins are viscous liquids that are capable of hardening permanently [14].Resins mainly fall into two groups, one is
deposition type of resins. This type of resins is deposited on the fabric as surface coating. No reaction will take place between
the fiber and resin. They include Phenol-formaldehyde resins, Urea formaldehyde resin, Alkyd resins, Ketone resins, Vinyl
resins etc. Another is Cross linking type of resins. These types of resins chemically react with the fiber and cross link the fiber
molecules [15].
Principle of Wrinkle Formation
Cotton is a cellulosic fiber and its polymer is linked by many hydroxyl (-OH) groups .The structural units of cellulose contain
crystalline region, amorphous region and intermediate region. In the crystalline region, the cellulose chains are closely packed
and the mobility of the chains is low. However, for the amorphous and the intermediate regions, the molecular chains are
temporarily held together with weak hydrogen bonds and the bonding could be broken easily when distortion force is applied.
After the force is applied, the temporarily bonds would reform into a new position and the chains are failed to return to their
original positions. As a result, wrinkle or crease is formed [16].
How Resin Works
The resin forms covalent bonds to replace the weak hydrogen bonds between the cellulose chains. Therefore, the stability of
the bonding would be improved and the molecule chains would more likely to return to its original position. When cellulose
cotton fiber is treated with resin agent, intermolecular crosslinks would be strengthening because of the bonding. As a result,
cellulose chains would be able to hold the adjacent molecular chains [16].
Resin Application
Resin is applied on finished garment where wrinkle has to be made then wrinkles are created manually or semi automatically
[19]. Low formaldehyde or formaldehyde free catalyst integrated crosslinking N, N-dimethylol 4, 5-dihydroxy- ethylene urea
(DMDHEU) type resins along with support auxiliaries are being used in a large scale in denim industry[18,21]. Support
auxiliaries are used for various purposes such as improving resin penetration into thick fabrics and seams, creating creases at low
temperatures, improving handle when used as a softener in last bath, imparting extra shiny look etc. [20]. Different types of resin
application systems are described below.
Garment-Dip Method
In the garment-dip method, garments are impregnated with a resin solution, extracted to about 65 percent wet pick-up and then
tumble dried to 8-10 percent moisture content [10].
Spray Method
In the spray method is a latest technology of wrinkle finishing, the resin is applied by spraying it onto the garment during
tumbling in an enclosed rotational device, or on spray booth where garments being hanged to inflated balloons & sprayed a
measured quantity of resin solution [17].
Spray Method with Conveyor
Spray Cabinets with Conveyor allows to apply chemical application to robots dressed up with jeans while, they are moving on
the conveyor and is a system that makes easy and increase the workflow and daily capacity [17].
Techniques of Wrinkle Formation
Wrinkles on overall garments or specific desired areas are created manually or automatically by manipulating denim garments
in different ways [13]. Some industrial wrinkle making techniques are described below.

84 2015; 2(3): 82-87
By Tying Specific Area with Thread
After resin application, tying is done with thread at the specific area where crinkle effect is desired. The garments is then sent
to oven for curing [23].
By Using Clip
In this process the small areas of the garment is bound by using clips on the required areas for desired effect and then garment
is put in the oven for curing [18].
By Using 3D Wire Crinkle Machine
This machine consists of 3 operation heads and 3 stations. Variable pressure can produce unlimited crease designs which can
be altered easily by changing the wire configuration. The operation time is around 30 seconds.
By Using Garments Crushing Machine
It is a scrunch/ crushing machine of steam system, achieving different levels of wrinkle and/or pressing. This machine is used
for scrunch applications and making wrinkle all over the garment. The effects can be adjusted depending on the pressure, steam
and chemical level [22].
By Using 3D Bendable Leg
This machine is used to give some crinkle effects on the denim jeans during the washing process. This ﬂexible hanger consists
of one station and one ﬂexible hanger. There is no energy consumption in this system. It works just with air [17].
By Using the Crinkle Press
The Crinkle press consists of 2 application stands and one head that will press the trousers to be given effect on these stands.
The system works with air and electricity. The air is used for creating pressure force of the air pistons, while electricity is used for
feeding resistances of the heating group. The system is sliding and the product can be prepared on one stand while the pressing
procedure is carried out on the other [17].
By Using Octopus Crinkle Machines
It has double header 6 head & 6 legs, separate heating in down of each leg and 6 locations can be operated on same time. Two
user can operate whole system. All 6 legs and heads can be controlled separately. Front pocket with regions and next fractures can
be made at same time and top and bottom heaters blow of one executable request [24].
By Using Knee Effect Machine
This machine is being used for getting loose the knee area of the denim jeans. The temperature and the processing time can be
easily adjusted from the control panel [17].
By Using Net Machine
It works with air and pressure of 6 bar and no electricity is required. There is 6 liters air consumption per jeans. The main tube
was made from stainless steel. [17].
By Using Double Head Crinkle Machine
Double Head Crinkle Machine is used to obtain permanent crinkle effects on various parts of the garments. Due to its usage
ease it is highly preferred. Regardless of the garment size, with the help of double creasing frame of the machine, it is easy to give
the crinkle effects on desired parts of garments [17].

ISSN: 2375-3803 85
By Using Crinkle Machine with Spiral
The Crinkle Machine with Spiral, having 6 heads, is a highly effective wrinkling machine due to its high running speed, fast
workﬂow and as it enables low cost production. The garments to be given crinkle effects before and as well as after the washing
process are located on the heaters and treated by the heads of the machine respectively. The crinkling process time is around 30
seconds if the garments are treated before the washing process, whereas it is 20 seconds if the garments are treated after the
washing process [17].
Curing with Ovens
Curing is the process to place the fabric at high temperature for allowing the chemical to carry out the reaction process [16].
For high quality 3D crunching / wrinkles, the two most important criteria are temperature and control of cycle [10].Oven curing
is needed to reach right temperature (145–160°
C) & time (7–22 min) as per resin tech bulletin advice [12]. Some typical
industrial ovens e.g. automatic type ovens with conveyor, box type curing oven with trolley, semi-professional curing ovens with
conveyor are being used widely [17].
Parameters in Choosing Denims for Resin Application
The garment finisher usually does not manufacture his own fabric and he may be faced with unacceptable losses in tensile
strength, tear strength and abrasion resistance in the fabric when cross-linking [10].For producing an acceptable 3D effects
Denim, several precautions must be taken in fabric selection e.g. the base fabric must have sufficient strength to withstand
40-60 per cent loss in tensile and tear strength and still maintain sufficient strength to provide a garment of acceptable wear
life and durability, it must also have excellent absorbency to allow resin to penetrate into the very interior of the fibers and
form crosslink’s. Surface adhering resins do not serve any useful purpose and are inefficient and wasteful, if the fabric is dyed
the dye must be fast to acid catalysis and high temperatures. Sulphur dyes, which are known to generate acid upon storage, are
to be strictly avoided & Lycra/Spandex based fabric also should be tested on elongation before mass production. Residual
extractable on the fabric (like starch from size) can react with resin and lower its effectiveness, a high degree of size removal
is thus essential. Fabric pH
should be between 6.5 to 7. [10].
Advantages and Disadvantages of Wrinkle Finish
Wrinkle effect on denims creates unique & vintage looks that makes the garments more fashionable, hence adding value to
denim garments & improves its salability in market. It prevents the intermolecular slippage in the fiber core and it may not
harmful if we use formaldehyde free resin.
It decreases the tensile & tear strength, abrasion resistance. It gives an unpleasant odor and unwanted harsh & stiff feel. It may
turn the fabric yellow after chlorine bleaching. Sometimes it is difficult to remove unfixed resin [12].
Elias Khalil
B.S. degree in Textile Engineering (Wet Processing Engineering) from Bangladesh University of
Textiles (BUTex) in 2011. During 2011-2013, he stayed in National Institute of Engineering and
Technology (NIET) and a renowned Textile factory. His concentration areas are Apparel Manufacturing,
Etextiles, Geotextiles, Non-Woven Composites, Wet Processing, and Nanotechnology in textiles,
Polymer, Application of Computer in Textiles. His M.Sc. in Textile Engineering (Apparel Manufacturing
Engineering) is ongoing at BUTex and now working as a Co-coordinator & Lecturer in Department of
Textile Engineering at World University of Bangladesh.
Email address: eliaskhalil52@gmail.com

86 2015; 2(3): 82-87
Md. Mazedul Islam
B.S. degree in Textile Engineering (Garments Manufacturing Technology) from Bangladesh University
of Textiles (BUTex) in 2009. Then he started his career as a Textile Engineer (Merchandiser) at
renowned textile factory and joined at Daffodil International University (DIU) as a lecturer of Garments
Manufacturing Technology Department. His concentration areas are Sustainability of Textile and
Clothing Industry, Sustainable Development of Textile and Clothing Products, Green Fashion design &
Merchandising, Nanotechnology in textiles etc. After serving DIU successfully, he joined Dhaka
University of Engineering & Technology (DUET), Gazipur, as a lecturer in 2012 and currently working
here. His M.Sc. in Textile Engineering (Apparel Manufacturing Engineering) is ongoing at BUTex.
Email address: mazed.butex77@gmail.com
References
[1] Juciene, M., Dobilaite, V., & Kazlauskaite, G. (2006). Influence of industrial washing on denim properties. Materials science, 12(4), 355.
[2] Mondal, M. I. H., & Khan, M. M. R. (2014). Characterization and process optimization of indigo dyed cotton denim garments by
enzymatic wash. Fashion and Textiles, 1(1), 1-12.
[3] Khan, M. M. R., Mondal, M. I. H., & Uddin, M. Z. (2013). Sustainable washing for denim garments by enzymatic treatment. Journal of
Chemical Engineering, 27(1), 27-31.
[4] Joy Sarkar, Elias Khalil, M. S. (2014). Effect of Enzyme Washing Combined With Pumice Stone on the Physical, Mechanical and Color
Properties of Denim Garments. International Journal of Research in Advent Technology, 2(9), 65-68.
[5] Khan, M. M. R., Mondal, M. I. H., & Uddin, M. Z. (2011, December). Effect of bleach wash on the physical and mechanical properties of
denim Garments. In International Conference on Mechanical Engineering (Vol. 3).
[6] Sarkar, J., & Khalil, E. (2014). Effect of Industrial Bleach Wash and Softening on the Physical, Mechanical and Color Properties of
Denim Garments. IOSR Journal of Polymer and Textile Engineering, 1(3), 46-49.
[7] Haq¹, U. N., & Khan, M. M. R. Technology of Acid Wash on Woven Denim Apparel with Damp Pumice Stone.
[8] Mazumder, S. (2010). Effects of sand blasting with industrial enzyme silicon wash on denim apparel characteristics. Daffodil
International University Journal of Science and Technology, 5(1), 6-9.
[9] Denim Dry Finishing: Flourishing the Value of Denim, By: Aravin Prince Periyasamy, Govardhana Rao Chilukoti and K.Thavasiappan,
Retrieved from www.fibre2fashion.com
[10] Resin Treatments: Giving Value addition to Vintage Denim garments, By Sandeep Agarwal, Retrieved from
http://www.denimsandjeans.com/
[11] Wrinkle. (2015, March 4). In Wikipedia, The Free Encyclopedia. Retrieved 15:08, April 1, 2015, from
http://en.wikipedia.org/w/index.php?title=Wrinkle&oldid=649824591
[12] Wrinkle finishing technique, By Azmir Latif, Retrieved from http://www.slideshare.net/
[13] How to Get the Wrinkled Look in Your Jeans, By Kimberly Caines, Retrieved from http://www.ehow.com
[14] Synthetic resin. (2015, January 10). In Wikipedia, The Free Encyclopedia. Retrieved 15:56, April 1, 2015, from
http://en.wikipedia.org/w/index.php?title=Synthetic_resin&oldid=641939748
[15] Resin Finishing, By Aravin prince, Retrieved from https://www.scribd.com
[16] Ho Long Yi, A Study of The Resin Finishing On Wrinkle Property Of Light Weight 100% Cotton Plain Fabric, Institute of Textiles &
Clothing, Hong Kong Polytechnic University May 2012
[17] http://www.metodmakina.com/
[18] Personal communication, Tarasima Apparels Ltd (Bitopi Group), Dhaka - Aricha Hwy, Bangladesh.
[19] Wrinkle Making Chemical For Denim Garment, Retrieved from http://www.kenencoregroup.com/
[20] DyStar Lava Laundry Auxiliaries, Retrieved from http://www.kaisertekstil.com/
[21] Yao, J. M., & Wei, S. N. (2013, January). The Composite Catalysts Used for Cotton Denim Resin Wrinkles Setting. In Advanced
Materials Research (Vol. 602, pp. 908-912).

ISSN: 2375-3803 87
[22] http://www.tradeindia.com/fp1363472/Garments-Crushing-Machine.html
[23] Personal communication, Hams Washing & Dyeing Ltd, 190, Tejgaon I/A, Dhaka-1208.
[24] http://www.tradeindia.com/fp550943/Octopus-Crinkle-Machines.html.

Wrinkle finish on denim by resin treatment: A Review

More Related Content

What's hot (20)

Similar to Wrinkle finish on denim by resin treatment: A Review (20)

More from Elias Khalil (ইলিয়াস খলিল) (18)

Recently uploaded (20)

Wrinkle finish on denim by resin treatment: A Review