Ziyao LiIAS 3753Dr. Manata HashemiWorking Title The Edu.docx

Ziyao Li
IAS 3753
Dr. Manata Hashemi
Working Title:
The Education Gap
Research Question:
How did the youth of Iran make up the education gap
resulted from the Cultural Revolution from 1980 to 1982?
This is a critical question because it involves both
education and the youth of Iran. Education and the youth are
both very fundamental perspectives for a society to thrive.
During the cultural revolution, the education system was shut
down, which would undermine the overall quality of a
generation. Research of this issue will lead us to the methods
used to make up the education gap. It is possible to help other
countries suffering similar issues.
Thesis Statement:
After the Iran’s cultural revolution during 1980 to 1982,
the youth of Iran made up the education gap caused during the
revolution by promoting student movements.
Outline:
· Introduction:
· Cultural Revolution happened in Iran during 1980 to 1982.
The education institutions like universities were shut down for
the 3-year period. And this gap in education brought significant
influence on the youth of Iran at that time. However, the
education gap was made up successfully after the revolution.
· State the thesis statement:
· The education gap is made up by the youth in Iran. They
promoted the student movement to help the society recover from
the revolution.
· The scars left from the revolution
· The revolution lasted 3 years, young people who were

supposed to be students had to quit school. The government
forced schools to close. The chain of delivering knowledge was
broken. And young people cannot find proper things to do when
quitting school.
· Student movements
· After the cultural revolution, people in Iran realized they need
to correct the current education situation recover the damages
resulted from the revolution. Since Iran’s youth has a great
number in the society, their power was not to be ignored. They
started to fight for their own rights and profits. They were
looking for ways to make up the damage has been down. Then
the student movement eventually worked for recovering Iran’s
education level.
· Conclusion
· The cultural revolution in Iran hurt its education continuity.
However, the youth of Iran managed to make up for the damage
caused by the cultural revolution. Student movements played
the dominant role in this recovering process.
Bibliography:
Khosrow Sobhe (1982) Education in Revolution: is Iran
duplicating the Chinese Cultural Revolution?, Comparative
Education, 18:3, 271-280, DOI: 10.1080/0305006820180304
Mashayekhi M. The Revival of the Student Movement in Post-
Revolutionary Iran. International Journal of Politics, Culture &
Society. 2001;15(2):283. doi:10.1023/A:1012977219524.
Razavi, R. (2009). The Cultural Revolution in Iran, with Close
Regard to the Universities, and its Impact on the Student
Movement. Middle Eastern Studies, 45(1), 1–17. https://doi-
org.ezproxy.lib.ou.edu/10.1080/00263200802547586
ZABARDAST, S. (2015). Flourishing of Occidentalism in Iran
After Cultural Revolution. Journal of Gazi Academic
View, 9(17), 215–228. Retrieved from

http://search.ebscohost.com.ezproxy.lib.ou.edu/login.aspx?direc
t=true&db=aph&AN=111891854&site=ehost-live
Biedzynski J. Warring Souls: Youth, Media and Martyrdom In
Post-Revolution Iran. Journal of Third World Studies.
2010;27(2):334-335.
http://search.ebscohost.com.ezproxy.lib.ou.edu/login.aspx?direc
t=true&db=afh&AN=57718463&site=ehost-live. Accessed
October 2, 2019.
Satrapi, Marjane,Satrapi, Marjane,The Complete Persepolis /
Marjane Satrapi. New York : Pantheon Books, [c2007.
Mohammad Khatami’s Address to the United Nations
“The Youth,” Iran Primer
Scholarly, Peer-Reviewed, and Other Credible
Sources
Source type What is it? Examples Best used for

Scholarly A source written by scholars or academics in a
field. The purpose of many scholarly sources
is to report on original research or
experimentation in order to make such
information available to the rest of the
scholarly community. The audience for
scholarly sources is other scholars or experts
in a field. Scholarly sources include
references and usually use language that is
technical or at a high reading level.
*Note: Different databases may define
“scholarly” in slightly different ways, and thus
a source that is considered “scholarly” in one
database may not be considered “scholarly”
in another database. The final decision about
the appropriateness of a given source for a
particular assignment is left to the instructor.
Scholarly Journals
• Journal of Management Information
Systems
• American Journal of Public Health
• Early Childhood Research Quarterly
Scholarly Books (published by a university
press or other high-quality publisher)
• Shari’a Politics: Islamic Law and
Society in the Modern World
• The Grand Design: Strategy and the

U.S. Civil War
• The Hidden Mechanics of Exercise:
Molecules That Move Us
Journal articles:
• Recent research on a topic
• Very specific topics or narrow
fields of research
• NOT good for an introduction to
or broad overview of a topic
Books:
• In-depth information and research
on a topic
• Putting a topic into context
• Historical information on a topic
Peer Reviewed A publication that has gone through an
official editorial process that involves review
and approval by the author’s peers (experts
in the same subject area). Many (but not all)
scholarly publications are peer reviewed.
*Note: even though a journal is peer
reviewed, some types of articles within that
journal may not be peer reviewed. These
might include editorials or book reviews.

Refer to “Scholarly Journals” examples
Books go through a different editorial process
and are not usually considered to be “peer
reviewed”. However, they can still be
excellent scholarly sources.
Refer to “Scholarly Journals” description
**Note: some publications (such as some
trade journals) can be peer reviewed but not
scholarly. This is not common.
Credible A source that can be trusted to contain
accurate information that is backed up by
evidence or can be verified in other trusted
sources. Many types of sources can fall into
this category.
Refer to “Scholarly Journals” examples. Also:
• Newspapers
• Magazines
• Books
• Trade journals or publications
•
•
•
•
•

Basic/general/background
information about a topic
Current events
Local news
Statistical data
Information about specific
*Note: The final decision about the
appropriateness of a given source for a
particular assignment is left to the instructor.
• Government websites
• Websites from educational
institutions (like universities)
• Websites or other publications from
reputable organizations (like the
Mayo Clinic)
• Encyclopedias (general or subject)
Many websites could be considered credible.
The more information provided about the
source, the more likely they are to be
credible. Look for information about the
author and/or the organization, how recently
it was published, the intended audience, the
intended purpose, and whether there is
evidence of bias.
•
•

•
•
organizations or companies (look
at the organization’s or company’s
website, or look for articles in
newspapers or trade journals)
Government information
Information about popular culture
Opinions or commentaries
Topics of general interest
Ashford University Library, June 2015, CR 0130415
2/18/20, 7)21 PM
Page 1 of
2https://ashford.waypointoutcomes.com/assessment/23601/previ
ew
Description:
Total Possible Score: 15.00
Distinguished - The paper is well organized with the
introduction that provides sufficient background on the topic,
thesis
statement, and the conclusion that is logical, smoothly flows
from the body of the paper.
Proficient - The paper is organized with the introduction that
provides background on the topic, thesis statement, and the
conclusion that is logical but not quite smooth.

Basic - The paper is organized with the introduction and the
conclusion, but the introduction and/or the conclusion require
improvement.
Below Expectations - The paper is loosely organized with the
introduction and the conclusion, and the introduction and/or
the conclusion require much improvement.
Non-Performance - The introduction and the conclusion are
either nonexistent or lack the components described in the
assignment instructions.
Distinguished - Provides a comprehensive and expertly crafted
explanation of the chosen job design that identifies the
standard approach to job design: (a) job analysis, (b) job
description and (c) job specification.
Proficient - Provides a complete job design. The work identifies
the standard approach to job design: (a) job analysis, (b) job
description and (c) job specification. The job design is slightly
underdeveloped.
Basic - Provides a limited job design. The work identifies some
of the standard approach to job design: (a) job analysis, (b)
job description and (c) job specification. The job design is
underdeveloped.
Below Expectations - Provides a poorly developed job design.
The work includes a few if any of the standard approach to
job design: (a) job analysis, (b) job description and (c) job
specification. The job design is significantly underdeveloped.
Non-Performance - The explanation of the chosen job design is
either nonexistent or lacks the components described in the
assignment instructions.

Distinguished - Provides a comprehensive explanation of the
chosen organizational design. Effectively applies course
concepts to this explanation.
Proficient - Provides an explanation of the chosen
organizational design. Applies course concepts, but the
organizational
design is slightly underdeveloped.
Basic - Provides limited explanation of the chosen
organizational design. Somewhat applies course concepts. The
organizational design is underdeveloped.
Below Expectations - Provides a minimal explanation of the
chosen organizational design. Does not apply course concepts.
The organizational design is significantly underdeveloped.
Non-Performance - The explanation of the chosen
organizational design is either nonexistent or lacks the
components
described in the assignment instructions.
Distinguished - Displays meticulous comprehension and
organization of syntax and mechanics, such as spelling and
grammar. Written work contains no errors and is very easy to
understand.
Proficient - Displays comprehension and organization of syntax
and mechanics, such as spelling and grammar. Written
work contains only a few minor errors and is mostly easy to
understand.
MGT330.W2A1.11.2017
Organization: Introduction, Thesis Statement, and Conclusion

Total: 3.00
Explains the Chosen Job Design Total: 5.00
Explains the Chosen Organizational Design Total: 5.00
Written Communication: Control of Syntax and Mechanics
Total: 0.50
2/18/20, 7)21 PM
Page 2 of
2https://ashford.waypointoutcomes.com/assessment/23601/previ
ew
Basic - Displays basic comprehension of syntax and mechanics,
such as spelling and grammar. Written work contains a few
errors which may slightly distract the reader.
Below Expectations - Fails to display basic comprehension of
syntax or mechanics, such as spelling and grammar. Written
work contains major errors which distract the reader.
Non-Performance - The assignment is either nonexistent or
lacks the components described in the instructions.
Distinguished - Accurately uses APA formatting consistently
throughout the paper, title page, and reference page.
Proficient - Exhibits APA formatting throughout the paper.
However, layout contains a few minor errors.
Basic - Exhibits limited knowledge of APA formatting
throughout the paper. However, layout does not meet all APA

requirements.
Below Expectations - Fails to exhibit basic knowledge of APA
formatting. There are frequent errors, making the layout
difficult to distinguish as APA.
Distinguished - The length of the paper is equivalent to the
required number of correctly formatted pages.
Proficient - The length of the paper is nearly equivalent to the
required number of correctly formatted pages.
Basic - The length of the paper is equivalent to at least three
quarters of the required number of correctly formatted pages.
Below Expectations - The length of the paper is equivalent to at
least one half of the required number of correctly formatted
pages.
Distinguished - Uses more than the required number of
scholarly sources, providing compelling evidence to support
ideas.
All sources on the reference page are used and cited correctly
within the body of the assignment.
Proficient - Uses the required number of scholarly sources to
support ideas. All sources on the reference page are used and
cited correctly within the body of the assignment.
Basic - Uses less than the required number of sources to support

ideas. Some sources may not be scholarly. Most sources
on the reference page are used within the body of the
assignment. Citations may not be formatted correctly.
Below Expectations - Uses an inadequate number of sources
that provide little or no support for ideas. Sources used may
not be scholarly. Most sources on the reference page are not
used within the body of the assignment. Citations are not
formatted correctly.
Written Communication: APA Formatting Total: 0.50
Written Communication: Page Requirement Total: 0.50
Written Communication: Resource Requirement Total: 0.50
Powered by
The Organizing Function
Learning Objectives
After completing this chapter, you should be able to:
• Connect the organizing function with company success.
• Identify different categories of jobs.
• Employ the best form of departmentalization for a specific
company.
• Finalize the structure of a company.
• Describe various types of organizational configuration.

3
Tay Jnr/Digital Vision/Thinkstock
Introduction Chapter 3
3.1 Introduction
One key part of a manager’s job is to identify the best way to
organize and run a company or an
organization. Well-organized companies often become the most
efficient, effective, and produc-
tive in an industry group. Effective organizing processes lead to
company success. A management
team that can work with and implement the structures and plans
of a company is vital.
The organizing process flows naturally from the human
tendency to seek cooperation and col-
laboration. Many people are predisposed to cooperate with one
another. Early humans worked
together to survive.
While some cooperative human behaviors are likely instinctual,
people learn them mostly from
various interactions with the environment, family, school, and
culture. For example, many learn
early in life to keep their bedrooms clean and orderly. They
later learn to keep a school locker
orderly, and eventually they learn to organize computer files
and MP3 music files on portable
music devices. As humans evolved, their mental capacity for
planning and organizing became
more complex. Organizing complex structures, however, such as

a large-scale manufacturing
plant or a resort with 500 guest rooms, requires organizing
skills that encompass more than basic
socialization.
Organizing may be defined as the process of efficiently and
effectively bringing people and
resources together to create products and services. Organizing
establishes task and authority
relationships that allow people to work together to achieve the
organization’s goals.
Managers create structures within business organizations to
facilitate the operations of their
institutions. The structure of the organization consists of
individual jobs that are combined into
departments to create “the skeleton of the organizational
system” (Steers, Ungson, & Mowday,
1985). This structural “skeleton” holds up the entire
organization and allows it to move forward
to achieve its plan for success. Organizational structure is a
formal system of task and report-
ing relationships that coordinates the activities of employees so
that they can work together to
achieve organizational goals. The organizational structure
determines how an organization’s
resources can be best used to create goods and services.
Organizational design is the process
by which managers make specific organizing choices that result
in the particular kind of organi-
zational structure for the company.
In this chapter, we introduce the organizing function and divide
it into three primary activities:
job design, departmentalization, and specification. Job design
creates the individual job units,

departmentalization categorizes the jobs into logical groups or
departments, and specification of
authority–responsibility relationships finalizes the company’s
structure.
M A N A G E M E N T I N P R A C T I C E
The Richards Group: Organizing Creativity
The Richards Group, based in Dallas, Texas, is America’s
largest independent advertising agency.
The company generates billings in excess of $1 billion annually
and employs over 650 marketing
professionals. Its list of clients includes a variety of well-known
companies, such as Orkin, Fruit of
the Loom, T.G.I. Friday’s, Zales, Red Lobster, Farmers
Insurance, and others. Graphic Design USA has
(continued)
listed The Richards Group as one of the six most influential
agencies in the United States. The firm
has also received many awards, including Adweek magazine’s
Agency of the Year numerous times.
Beyond these simple statistics is a story that owner-founder
Stan Richards described as “a rocket
ride,” in an April 6, 2006, article in the Dallas Business
Journal. That ride led to his being named
one of The Wall Street Journal’s “Giants of Our Time.” Other
agencies have emulated many of the
tactics employed by The Richards Group. Richards notes that

his company instituted them first, and
he believes they still use them best. He has creatively employed
the fundamentals of organizing to
help the company achieve its dramatic success.
The Richards Group is founded on key core principles in its
mission statement and its overall strat-
egy. In a 2010 interview with Donald Baack, Stan Richards
expressed his company’s philosophy
when he said, “Some companies push products. Some sell ads.
We sell the truth.” The approach
clearly works. Richards notes:
When we are hired by a client, it’s not just to make ads. We do
so many things that are extremely
important. That ad is what the consumer ultimately sees, but in
order to get there, you have to have a
dead-on strategy, if you’re going to be successful. You go
through the strategic process, you get to the
right answer, and then you can execute against that answer.
Based on this foundation, the company’s organizational
structure has been built. The Richards
Group carefully engaged in job design. A small advertising
agency will hire generalists, who take
care of a variety of assignments. As the organization grows,
jobs become more specialized. The
Richards Groups employs highly skilled specialists in every
aspect of advertising, from creating con-
tracts with prospective clients, to purchasing media time, to
making advertisements, to evaluating
their success.
Departmentalization is the point where Stan Richards moved
away from traditional models. The
firm, which once consisted of fewer than 60 workers all located

on one floor of an office building,
expanded to a major office building on the North Central
Expressway in Dallas, Texas. Employees in
The Richards Group work in open offices with no doors or
walls. More significantly, Richards notes:
What we do is co-mingle all the disciplines, so that in every
cluster of spaces we will have an art director
who sits next to a brand manager, who, for example, sits next to
a print production manager, so that, in
those interdisciplinary villages that everyone here occupies,
nobody’s next door neighbor does the same
thing that he or she does. What you don’t get is all the creative
people sitting on this floor, then all the
account management people on the next floor, and the media
people on the floor above that.
The reason I did that in the first place was that when we were
50 or 60 people, there was an extraor-
dinary level of energy and electricity that just flowed through
the place. You could just walk in and feel
it. A lot of it was created by the casual contact people had with
each other. When you have 50 or 60
people packed into a tight space, you see everybody every day.
What agencies have always done, is when they reach that 120 to
130 person size, they then had to
move to multiple floors. And the minute they do, they take a
tight-knit bunch of people who really liked
each other and understood each other, because they saw each
other every day, and divide them up into
tribes. These tribes don’t always get along.
There are lots of occasions where a creative will butt heads with
a planner, because they have a differ-
ent point of view. When you are packed into a tight space, and

when you have a great deal of casual
contact going on all day, every day, you get over that stuff,
because they are your friends. When you’re
on a different floor, you seldom see them and you decide,
“That’s a different tribe up there, and they
drive me crazy.” By moving away from traditional forms of
departmentalization, the company has
avoided many of those problems. (S. Richards, personal
communication, February 2010, reprinted by
permission of Stan Richards.)
(continued)
Job Design Chapter 3
3.2 Job Design
One major aspect of creating a company’s organizational
structure involves designing jobs at all
levels of the hierarchy. Documenting the types of jobs the
company needs to complete its objec-
tives is the first step in the job design process.
A job is a set or series of tasks performed by an individual on
behalf of an organization. A task is a
single chore that is part of something larger—the job. For
example, a mechanic in a car dealership
may be asked to sweep the floor (one task), change the oil in a
truck (task two), and sometimes
drive patrons from the shop to their work or homes (task three).
Most jobs require the completion
of many tasks throughout the day. Jobs can also be assigned to
categories, such as those displayed
in Table 3.1.

Job design takes place when managers, nor-
mally working with the human resources
department, determine the tasks that need
to be completed, the people who will do
them, and the selection criteria that will be
used to choose employees and place them
on the job. The standard approach to job
design involves three steps: job analysis,
job description, and job specification. These
steps are described in detail in Chapter 4
pertaining to human resource manage-
ment. Jobs are the building blocks used
in creating the organization’s structure.
Carefully designed jobs allow workers to
succeed by being responsible for appropri-
ate and manageable levels of work. Also,
precise job descriptions provide workers
Wavebreakmedia Ltd/Thinkstock
▲▲ The specific tasks performed by a mechanic, when com-
bined, constitute his job.
The organizational structure at The Richards Group consists of
fairly standard authority–responsibil-
ity relationships. Individuals continue to report to supervisors
who are in charge of the basic func-
tions, such as media selection. At the same time, to continue the
creative cooperative spirit built by
comingling specialists, staff meetings are often held in the
stairwells between floors to help main-
tain egalitarian and positive relationships among all employees.
Some of the successful campaigns initiated by The Richards
Group include the longstanding Chick-
fil-A cow campaign, the Motel 6 campaigns, and the company’s

2010 and 2011 Super Bowl com-
mercials with Bridgestone. Another product, Corona, has
become the number one imported beer
in the United States. It has passed Heineken due, in part, to a
successful advertising management
program assisted by The Richards Group (Richards, 2010).
Discussion Questions
1. How are jobs in advertising agencies different from jobs in
other companies?
2. Do you think comingling specialists, as is the case in The
Richards Group, would work in other
companies?
3. What types of individuals should The Richards Group hire,
and what types would not fit with
the company?
Departmentalization Chapter 3
with clarity regarding which tasks they are and are not assigned
to do. Well-written job specifica-
tions enhance the odds that the proper person will be hired to
complete the assigned tasks.
Table 3.1 Types of jobs
Category Examples
Unskilled Blue Collar Housekeeper
Trash hauler

Semiskilled Blue Collar Assembly line employee
Truck driver
Skilled Blue Collar Electrician
Plumber
Carpenter
Front-line White Collar Retail clerk
Bank teller
Semiprofessional Paralegal
Paramedic
Dental hygienist
Professional Doctor
Attorney
CPA
Specialized Professional Research scientist
3.3 Departmentalization
Departmentalization is an organizational tool that involves
placing various jobs into individual
departments or divisions including accounting, marketing, and
production. Although depart-
mentalization may be used in several other ways, Table 3.2
summarizes some of its various forms

and indicates when each of them may be most helpful to the
management team.
Table 3.2 Forms of departmentalization
Departmentalization by . . . Found in . . .
Function small, single-product/service firms
Product growing, few product companies
Customer firms selling the same product to diverse customers
Geographic region branch banking, retail chains, franchise
operations
Strategic business unit conglomerates
Matrix high-tech firms, multinational companies
Departmentalization by Function
Departmentalization by function is the most common form,
because most companies are
smaller and offer one main product or service. Figure 3.1
presents a simplified organization chart
for a firm using this approach. Functional structure allows for
top-level control with exper-
tise maintained in the individual departments. Jobs are easily
matched to functional specialties
(Mintzberg, 1979).

Henry Mintzberg (1983) recognized five coordinated flows
linking the common parts of
departmentalization:
1. Authority. Authorization is needed to move the structural part
forward and complete job tasks.
2. Work material. Raw material and supplies are essential to
start and complete tasks.
3. Information. Data is required to inform decision making at
every level of the organization.
4. Decision process. Timely decision making allows for the
continual operation of job tasks.
5. Ideology. An organization’s unique vision, theories, culture,
and traditions contribute to its
structure.
Mintzberg’s coordinated flows are essential to begin operating
activity as well as to measure
progress. They are well served by a functional form of
departmentalization.
Departmentalization by Product
Multiproduct firms use departmentalization by product, in
which all activities related to a prod-
uct or service are placed in one department under one executive
or senior manager. Figure 3.2
shows an example as applied by the Bic company, which is
divided based on the products sold.
General Motors, DuPont, and other firms learned that growth
and expansion of product lines
requires a form of structure that facilitates the differences in
products and at the same time
allows for some specialists to serve all parts of the company.

Departmentalization by product
meets these needs and demands (Ranson, Hinings, &
Greenwood, 1980).
Departmentalization by Customer
Many companies offer the same product to divergent customers.
As depicted in Figure 3.3,
departmentalization by customer allows for specialization based
on customer differences.
A company such as Dell Computers has three distinct groups:
other businesses (industrial or
b-to-b sales), the government, and individual consumers. This
form of structure offers the advan-
tage of optimizing the services to all groups, each of which
have unique purchasing needs and
purchasing methods. For example, individuals buy online or at
the store, businesses tend to make
Figure 3.1 Departmentalization by function
f04.01_MGT330.ai
President
Vice President
Sales
Vice President
Production
Vice President
R&D
Vice President
Accounting

purchases at trade shows or through a purchasing department,
and governments must follow
specific, regulated procedures. The three groups require
differing service needs, such as repair
contracts and warranties.
Departmentalization by Geographic Region
When a company is divided by territories or regions, terms such
as district, zone, and area are
assigned to the departments. Figure 3.4 is an example of
departmentalization by geographic
region. Departmentalization by location is also known as
parallel departmentalization, because
the levels in the organizational hierarchy contain managers who
perform the same duties in dif-
ferent regions, such as at branch banks or fast-food locations.
Geographical departmentalization
makes it possible to tailor managerial efforts that address
territorial differences. For example,
a Sears retail store in Florida will sell different items than one
in Minnesota during the winter
months; however, the department names remain the same. A
food chain such as Subway may
offer region-specific menu items, while the basic model of
operation remains the same in all
locations.
Figure 3.2 Departmentalization by product
f03.02_MGT330.ai

President
Bic, Inc.
Vice President
Pens
Vice President
Razors
Vice President
Accounting
Vice President
Lighters
Production Sales Production Sales Production Sales
Figure 3.3 Departmentalization by customer
f04.03_MGT330.ai
President
Industrial
Sales Division
Government
Sales Division
Vice President
Accounting
Consumer
Sales Division

Departmentalization by Strategic Business Unit
As noted in Chapter 2, strategic business units are clusters of
activities typically held together by
a common thread, such as a product type or type of customer
served. A strategic business unit
(SBU) will be analyzed as a “company within the company.”
Many major corporations align stra-
tegic business units by products, customers, geographic regions,
manufacturing methods, and
other common elements (Figure 3.5). For example, 3M may
subdivide its operations into strategic
business groups organized by type of product: sticky (duct tape,
Scotch tape), magnetic (DVDs,
recording tape), and cleaners. Each strategic business unit may
be evaluated through the revenues
it generates or profits it creates, which means some units will be
termed “profit centers.” Others
may be structured as cost centers or as simple operating
divisions. If Amazon.com divided into
one unit based on selling popular press books, another featuring
electronic transmission of book
materials, and a third focused on high school and college
textbooks, each of them could become
a stand-alone strategic business unit.
Figure 3.4 Departmentalization by geographic region
f03.04_MGT330.ai
President

Vice President
Western Region
Vice President
Central Region
Vice President
Eastern Region
District Manager District Manager District Manager
Store Managers Store Managers Store Managers
Figure 3.5 Departmentalization by strategic business units
f03.05_MGT330.ai
President
Vice President
SBU1
Vice President
SBU2
Vice President
SBU4
Vice President
SBU3
Departmentalization by Matrix

Matrix organizations are also called two-boss systems. As
shown in Figure 3.6, each employee
answers to a functional area supervisor as well as a product
manager. For example, the top row in
this figure includes three functional first-line supervisors: one
for production, one for accounting,
and one for sales. Directly below them are the employees
performing those functions. The verti-
cal row of supervisors in the same figure indicates managers for
individual products (1 and 2).
Thus, a production worker in the top row responds to a
functional manager (production supervi-
sor) and to a product manager (product 1). In the next row
down, production workers respond
to the same production supervisor but to the manager for
product 2. The same holds true for
salespeople responding to the sales manager and then to the
product manager to whom they are
assigned (1 or 2) as well as for accountants answering to the
accounting supervisor but also to
their designated product manager, 1 or 2.
Matrix organizations create circumstances in which maximum
flexibility and adaptability in
operations are possible, because workers are routinely assigned
to differing products and product
managers. Consequently, they must be able to adjust to change
and accept some role ambiguity
as part of the daily routine as the tasks they work on tend to
vary. The only constant will be the
employee’s functional supervisor.
Figure 3.6 Departmentalization by matrix
f04.06_MGT330.ai

Vice President
Product 1
Vice President
Product 2
Vice President
Production
Vice President
Sales
Vice President
Accounting
Top-Level
Management
Team
Production
Group
Product 1
Accounting
Group
Product 1
Sales
Group
Product 1
Production

Group
Product 2
Accounting
Group
Product 2
Sales
Group
Product 2
Completing the Organization’s Structure Chapter 3
An adaptation of the matrix organization is to design the
company by product and by country.
Products must often be adapted when moved into new areas, due
to differences in electrical sys-
tems (AC versus DC) and in measurements such as ounces
versus grams. Product managers are
asked to identify national differences and help adapt production
systems, marketing programs,
and other activities to the new circumstances. In this adaptation,
the functional managers remain
the same. Instead of product managers (the vertical row of
supervisors), the titles become those
assigned to managers for various countries. Each employee then
has a functional supervisor and a
national supervisor who is responsible for helping the company
adapt to differing circumstances
in other countries.

Managerial Concerns
The most rudimentary form of organizational structure, by
function, is also the most common.
This form is seen in smaller, single-product or service
companies, which constitute the majority
of businesses. As companies add products, services, and
additional specialists and activities, the
degree of complexity rises and more intricate departmental
arrangements normally result.
Departmentalization by products will be best suited to
companies that have begun to grow by
adding new products and services (product diversification).
Departmentalization by customer
tends to be found in organizations that sell the same product to
diverse customers, such as com-
puters and other technologies as well as some other, more basic
items. Departmentalization by
geographic area, or parallel departmentalization, is typical when
a company performs the same
activities in various geographic areas, such as is found in retail
chains (Walmart, Sears, Target), in
fast-food chains (Subway, McDonald’s, KFC), and in branch
banking, which allows managers to
customize to the unique needs of the region while at the same
time standardizing many aspects
of company operations. Strategic business units are used in
multiproduct/multiservice conglom-
erates with high degrees of differentiation between units. The
matrix organization grants the
manager the highest degree of flexibility and adaptability and
normally is present in high-tech
firms that must adapt to quickly changing environmental
circumstances as well as in companies
operating in various countries.

Remember that these forms of departmentalization can be
adapted to meet specific company
needs as well as be modified to serve in multinational
companies, nonprofit organizations, and
even governmental institutions. The needs of the organization
should dictate its structure.
3.4 Completing the Organization’s Structure
Completion of an organizational structure occurs as managers
identify the amount of influence
and accountability for these different individuals and groups,
along with other elements of orga-
nizational design. The organization charts shown in the previous
section depict the first key
activity that is part of completing the organization’s structure:
drawing lines of authority and
responsibility. In each of the models, any vertical line from one
position to the next lower (or
higher) depicts an authority–responsibility relationship. In
essence, a president holds authority
over his or her vice presidents; those VPs are responsible for
carrying out the president’s instruc-
tions and decisions.
Authority, then, consists of the right to direct with permission
to act, which suggests that
authority has two key components. The right to direct means the
right to give orders and oversee
activities. The manager of an auto repair shop has the authority
to ask a worker who is changing

a tire to stop and help another employee pull the transmission
from another car being repaired.
Permission to act represents the right to make decisions on
behalf of a company. The auto repair
manager may have made the decision to work on the
transmission first, knowing that because the
customer needing a new tire will not return until the next day,
that task can be completed later.
The transmission repair is more urgent and deserves attention
first.
Responsibility, or accountability, is the obligation to complete
tasks as assigned by reporting to a
specific supervisor. Someone who is responsible follows
directions and is expected to follow them
correctly and completely. The mechanic who has been asked to
assist in the transmission repair
should do so until the chore has been successfully completed.
The noted French management expert Henri Fayol (1916) was
among the first to describe the
concept of parity of authority and responsibility. This principle
suggests that anyone who holds a
position of authority should be held accountable for how that
authority is used. Further, anyone
who is responsible for an outcome should have sufficient
authority to carry out the assignment.
In today’s modern organizations, three forms of authority are
found. Line authority is direct
formal authority, the type shown on the lines of an organization
chart. Staff authority consists
of the right to advise or give advice. A company’s legal
department provides legal advice to all
levels in the company. An accountant gives tax advice to all
departments. Functional authority

has been described as the right to direct, but not to discipline. It
occurs when a person has been
placed in charge of a task force or committee. The individual is
charged with the responsibility
of getting something done (direct), such as completing a safety
committee report; however, com-
mittee members may or may not follow directions and complete
the task on time. Functional
authority relies on employee professionalism to accomplish
goals. Due to the increasingly com-
plex nature of work, the reliance on functional authority has
risen as the number of teams and
groups increases. When the first process in completing the
structure of an organization, outlin-
ing authority–responsibility relationships, is complete, then
other decisions can be made.
Sources of Authority
Where does authority come from? How is it established? Over
the years, two major perspectives
regarding the nature of authority and its sources have emerged.
One theory suggests a “top down”
source of authority; the other proposes a “bottom up”
foundation.
Max Weber, a German sociologist who studied organizations,
suggested three sources of authority
from the top-down perspective. Traditional authority derives
from longstanding traditions within
countries whose kings, chieftains, and church officials possess
the ability to direct others through
birthright or societal beliefs in governmental or religious
systems. In Europe, many business organi-

zations were founded through the dictates of members of royal
families, which meant that submit-
ting to the authority of a supervisor was, in essence, submitting
to the authority of the crown.
A second source, charismatic authority, emerges as a “gift of
grace”—for example, when a dynamic
military leader inspires and guides troops. A leader like this
holds and maintains authority due to
personal characteristics including charm, persuasiveness,
inspirational ability, and so forth. Such a
“general” then becomes empowered to direct the activities of
others within his or her domain.
(continued)
Centralization and Decentralization
Another key set of decisions to be completed includes those
regarding the delegation of author-
ity. Centralization and decentralization refer to the degree of
delegation of decision making,
authority, and power within an organization. A highly
centralized organization is one in which
authority is not delegated. The executive management team, for
example, makes key decisions
and issues orders that direct company activities. Other members
of the organization must take
and follow orders issued by the executive management team. In
a highly decentralized firm,
front-line supervisors make important organizational decisions.

Size and Decentralization
Peter Blau (1970) suggests that a strong relationship exists
between the size of an organization
and the degree of decentralization. In essence, smaller firms are
likely to remain centralized,
because managers are aware of all activities and know each
employee. This places them in the
position to make all decisions. As a firm grows, the company
begins to add specialists and new
departments. The sheer volume of decisions to be made rises.
The top manager becomes less able
to direct everything, which means delegation begins to take
place. At the same time, the top
manager wants to retain a degree of control, which leads to
standardization, formalization, and
mechanization/computerization.
Standardization is the use of a series of job titles that are
exactly the same, and the work-
ers perform the same activities. Formalization refers to the
presence of rules and procedures.
Mechanization/computerization measures the reliance on
computers and technology to
The third source, legal/rational authority, is based on a con-
tractual agreement, such as one created between an organi-
zation and its employees. In exchange for compensation and
other benefits, …
Case Study: Opening Your New Dunkin’ Donuts Locations
Prior to completing this assignment, review the pertinent
sections of Chapter 3. You have been the manager of a Dunkin’
Donuts store in the Midwest for the past two years. The store is
owned by a Dunkin’ Donuts franchisee who owns 20 other
Dunkin’ Donuts locations. Your employer took an employee
inventory and examined all current employees. It has been noted

by the owner that you have a highly successful track record.
You have been recognized for doing an exceptional job staffing,
leading, training, coaching, and managing people. You have
been recognized for successfully managing all key components
of your store and have successfully managed key business
drivers such as cash, profits, growth, asset utilization, and
people. In regards to the metrics that are used to measure their
stores for sales, quality, and customer service, your store is the
top performing store in their system.
Congratulations! You have just been promoted to district
manager! The Dunkin’ Donuts franchisee sees your growth
potential and the growth potential in your geographic area. The
owner now has committed significant capital and plans to open
five new locations over the next two years. You will be given
complete autonomy, authority, and responsibility to structure,
staff, and operate these five new locations. You will be playing
a key role in this expansion for growth.
For this assignment, you will prepare a four to five-page paper
in which you explain your chosen job design and organizational
design as the new District Manager for Dunkin’ Donuts.
You must organize your paper using the following section
headings and include additional section headings as needed:
· Introduction—Provide a well-organized introduction to the
paper.
· Job Design—Explain your chosen job design including job
analysis, job description and job specification.
· Organizational Design—Explain why the chosen
organizational design was chosen.
· Conclusion
Your paper must include at least three scholarly sources in
addition to the textbook and be formatted according to APA
style guidelines as outlined in the Ashford Writing Center.
The Case Study: Opening Your New Dunkin’ Donuts Locations
paper
· Must be four to five double-spaced pages in length (not
including title and references pages) and formatted according to

APA style as outlined in the Ashford Writing Center’s APA
Style (Links to an external site.).
· Must include a separate title page with the following:
· Title of paper
· Student’s name
· Course name and number
· Instructor’s name
· Date submitted
· Must use at least three scholarly, peer-reviewed, and/or
credible sources in addition to the course text.
· The Scholarly, Peer Reviewed, and Other Credible
Sources (Links to an external site.) table offers additional
guidance on appropriate source types. If you have questions
about whether a specific source is appropriate for this
assignment, please contact your instructor. Your instructor has
the final say about the appropriateness of a specific source for a
particular assignment.
· Must document any information used from sources in APA
style as outlined in the Ashford Writing Center’s Citing Within
Your Paper (Links to an external site.) guide.
· Must include a separate references page that is formatted
according to APA style as outlined in the Ashford Writing
Center. See the Formatting Your References List (Links to an
external site.) resource in the Ashford Writing Center for
specifications.
Carefully review the Grading Rubric (Links to an external
site.) for the criteria that will be used to evaluate your
assignment.
The Planning Function
Learning Objectives

After completing this chapter, you should be able to:
• Explain how a company’s mission and strategic vision
statements shape its
planning processes.
• Describe how internal and external environments
influence a company’s plans.
• Analyze and develop sets of goals at the strategic,
tactical, and operational levels.
• Implement the three types of plans managers create.
• Allocate the proper amount of resources to carry out a
company’s plan.
2
iStock/Thinkstock
2.1 Introduction
Planning is a systematic process in which managers make
decisions about future activities and
the key goals that the organization intends to pursue. One
primary element of this process, stra-
tegic planning, focuses on planning for the future of the
organization. It is a purposeful effort
directed by management within an organization, which, when
conducted effectively, draws on
the knowledge, skills, and abilities of employees at all levels of
the organization. Quality strategic
plans integrate all company activities into one coherent course
of action (Bedeian, 1986, p. 100).
As noted in Chapter 1, the following steps are involved in

planning: Examining the company’s
internal and external environments to discover company
strengths and weaknesses and emerg-
ing opportunities and threats; determining which goals the
organization will pursue; choosing
strategies, tactics, and operational plans to achieve company
goals; and allocating organizational
resources to pursue the company’s goals. Each of these
activities can help you become a more
successful manager.
Fox Sports 1: Strategic Planning and
On-the-Ground Execution
The world of sports has experienced a multitude of changes,
many of them driven by new tech-
nologies. In the past century, major league baseball was at one
point broadcast only by radio and
sometimes even by an announcer reading ticker tape without
actually being at the game. Player
salaries were minimal and owners dominated the game. The
advent of black-and-white television
broadcasts changed perceptions of many sports, most notably
baseball, basketball, football, and
eventually the Olympics. Today, all of those telecasts seem
truly arcane.
New broadcasting technologies now allow for regional
broadcasts of all major sports, including
professional and college games. The availability of videotaped
highlights, on-site interviews, and
interactions using social media has once again changed the
landscape. Along with these innova-
tions came a major influx of money to be made by all

concerned: owners, players, and the media.
The Fox media group has made inroads into a variety of
television markets, including standard net-
work programming, news broadcasts, and many sports. Fox
holds the rights to broadcast Major
League Baseball, NFL football, numerous college football and
basketball games (including champi-
onship games and bowl games in football), NASCAR events,
and UFC fight nights, among others.
After assessing the opportunities and threats present in the
broadcasting environment, execu-
tives at Fox sports decided on a strategic plan. Fox Sports co-
president Randy Freer, noted, “As a
company we haven’t been afraid to innovate and take well-
calculated risks” (Fox Sports, 2013).
Consequently, the organization chose to go head-to-head with
industry giant ESPN by launching
FOX Sports 1, or FS1, in August 2013.
Previous attempts to make inroads on the ESPN mega-network
had failed, most notably when CNN
and Sports Illustrated magazine created the CNN-SI channel as
a joint venture. What made Fox’s
managers think they could succeed where others had failed?
“Building credibility and trust with
our audience is paramount, so naturally we’ll provide the
staples, like news, scores and highlights,
but we’ll do it in a FOX Sports way,” Fox co-president Eric
Shanks said. In other words, the co-
presidents reached the conclusion that a major opportunity
existed, expressed this way on the FOX
(continued)

The Value of Planning
Are you familiar with this saying? “A failure to plan is a plan to
fail.” It sounds reasonable, but in
today’s complex and rapidly changing environment, it might be
easy to conclude just the oppo-
site—that planning simply wastes time because things happen so
quickly. In reality, this saying
serves as a concise reminder that planning remains as important
as ever. Successful executives
follow the steps and principles of planning, specifically because
of environmental volatility.
Quality managers know that planning helps company leaders
anticipate change, and planning
helps managers make changes.
In this chapter, you will discover that the planning process
begins with a careful analysis of the
company’s internal and external environments. As a result,
company leaders are able to anticipate
change. Through careful forecasting and other environmental
scanning programs, the company
becomes less likely to be taken by surprise. When other firms
fail to spot trends or changes, a
company can take advantage by being able to move ahead. For
example, Amazon.com was able
to forecast a trend in which people would become more and
more comfortable with online shop-
ping, and an e-commerce retailing giant was born.
Planning helps company leaders implement change. Step-by-
step programs make it possible to
avoid missteps and confusion. A well-executed plan may be one

of the biggest time savers in busi-
ness. The steps of planning take place under the banner of the
firm’s overall statements about its
direction and purpose.
Sports website: “More people consume and care about
sports than ever before,” and even calling the demand
“voracious” at one point, suggesting a growing mar-
ketplace. This opportunity was matched with a major
company strength—the extensive sports programming
already in place. The expansion strategy became the
net result.
Naturally, ESPN will respond to these competi-
tive efforts. Weeks before the FS1 launch, ESPN
announced it had signed well-known commentator
Keith Olbermann to host a nightly show on one of
the company’s secondary channels. Industry analysts
expect other changes in the network as well. Just as
sports teams compete based on opportunities, threats,
strengths, and weaknesses, competitors in all for-profit
markets continually assess these factors and respond
with strategic plans, tactics, and operational efforts. The
coming years will reveal whether Fox’s venture into this
arena will succeed.
Discussion Questions
1. What environmental factors did FOX Sports executives
consider before launching FS1?
2. What internal strengths does FOX Sports hold? What
weaknesses?
3. Do you think FS1 will succeed? Why or why not?
Evan Agostini/Invision/AP

▲▲ The launch of the FS1 channel
resulted from identifying an oppor-
tunity and drawing on a key network
strength that was already in place.
The Value of the Planning/Control Cycle
Among the most important elements of planning is its basis for
the control system. As managers
create and implement goals and standards for individual
employees, departments, and the over-
all organization, they have established the baselines that will be
used to evaluate performance
at each level. Without a complete planning process that includes
setting clear-cut, measurable
standards, the function of control (discussed in detail in Chapter
7) is not possible.
At the same time, the control system is what begins the new
planning cycle. Information gath-
ered regarding performance from the previous year provides a
valuable starting point for the next
round of planning. In essence, one function cannot be carried
out without the other as the cycle
repeats itself over the life of the organization.
The opposite of the planning/control cycle is a situation called
“firefighting.” Instead of generating
a set of quality plans complete with useful goals and standards,
managers are forced to react to
the crises and emergencies that occurred because no plan was in
place. Firefighting wastes time,

managerial energy, and company resources.
Mission and Vision Statements
Organizations are created to meet various needs and provide
various goods and services. Business
organizations are founded with a major guiding principle in
mind. A company’s mission state-
ment expresses a clear and concise reason for the organization’s
existence. In essence, the mis-
sion statement answers the question, “Why are we in business?”
Outside of obvious answers, such
as “to make money,” mission statements define the overall
organization (Smith, Arnold, & Bizzell,
1985). You can view the mission statements of several Fortune
500 companies at http://www
.missionstatements.com/fortune_500_mission_statements.html.
Accompanying a mission statement will be the organization’s
strategic vision statement, which
points toward the organization’s future. The statement offers
direction about where the organiza-
tion is heading and what it hopes to become. It articulates the
long-term direction of the company.
Walmart’s vision statement is “We help people save money so
they can live better,” which replaced
its former version, “To be the worldwide leader in retail.” These
statements help inspire organiza-
tional members and provide a worthwhile purpose to work
together to achieve the vision. Many
times the statements are not financial in nature because such
visions might not appeal to everyone
in the organization. In the new millennium, many statements of
strategic vision have incorporated
concepts about globalization and the use of Internet technology
to build toward the future.

Mission statements and strategic vision statements form the
basis from which all planning
begins. As an example, Honest Tea’s mission statement is as
follows: “Honest Tea seeks to create
and promote great-tasting, truly healthy, organic beverages. We
strive to grow our business with
the same honesty and integrity we use to craft our products,
with sustainability and great taste
for all.” (Copyright © THE COCA-COLA COMPANY.
Reprinted by permission.) To help ful-
fill this mission, the company includes a corporate social
responsibility vision statement. These
documents drive every aspect of the firm’s operations, from the
design of the production plant to
relationships with all publics, including suppliers of flavors and
ingredients, retail outlets, local
communities, and governments. Employees at the entry level are
made acutely aware of the orga-
nization’s commitments. For any company, a strategic, tactical,
or operational plan that violates
these key statements takes the company off course and can
create serious complications in the
future. In the case of Honest Tea, this would include plans for
individual products as well as for
each department in the company. To keep the company on
course, each plan should align with
the concepts of honesty, integrity, and sustainability.
http://www.missionstatements.com/fortune_500_mission_statem
ents.html
http://www.missionstatements.com/fortune_500_mission_statem
ents.html
Assessing the Environment Chapter 2

2.2 Assessing the Environment
Would it surprise you to know that some of the earliest ideas
about strategic planning came from
a Chinese general? Over 2,500 years ago, Sun Tzu wrote The
Art of War. The book explains how
to develop military strategies that lead to victory. Sun Tzu
argued that intelligence and cunning
are often more effective than violence and destruction.
Alliances make it possible for a military
leader to expand an empire without losing soldiers and
depleting other resources. When in battle,
the best approach is to attack the enemy’s weak points and take
advantage of the strengths of
one’s own army. In essence, the first environmental analysis
was part of a military operation a
very long time ago.
Assessing the environment involves two key activities:
examining the company’s internal opera-
tions and analyzing the external environment. The combination
of the two factors guides the
management team as they seek to create plans with the highest
potential to be successful.
Internal Operations
Various levels of analysis can be combined to understand the
well-being of a company. Normally,
assessment of the internal environment takes place at the
strategic, tactical, and operational lev-
els. It is tempting to think that the greatest amount of
consideration should be given to the stra-
tegic level; however, actions at the lower levels can contribute
greatly to a company’s success.

Strategic Assessment
Strategic business units are clusters of activities typically held
together by a common thread,
such as a product type or type of customer served. A strategic
business unit will be analyzed
as a “company within the company.” As an example, the 3M
Corporation could establish one
division devoted to magnetic tape (video and audio) and another
to adhesive tape (Scotch
tape, duct tape, packing tape). The evaluation of strategic
business units will be devoted to
understanding whether these portfolios of activities mesh and
provide the company with a
viable future.
Profit centers are business units treated as distinct from one
another in terms of generating rev-
enues and creating expenses so that profitability can be
measured. A profit center manager will
be responsible for cost controls and creating revenue streams
(Clow & Baack, 2010, p. 398). In the
Fox media group, one profit center might be television
programming, a second would be newspa-
pers, and a third would be radio station revenues.
Strategic analysis involves assessing how all operating
divisions, profit centers, subsidiary
companies, and other major elements are working together.
Managers consider the group of
activities to see how each performs individually and how it
contributes to the organization’s
overall well-being. One division may not make a great deal of
profit, but it may still contribute
by providing low-cost supplies or services to the other divisions
(Thompson, Strickland, &
Gamble, 2008).

Tactical/Functional Assessments
The second level of analysis focuses on the various departments
or functions within the com-
pany. Tactical assessments help the management team identify
more concrete areas where com-
panies have strengths and weaknesses. As a simple example, the
Aflac duck advertising campaign
has created strong brand recognition in the company’s
marketing program and constitutes a key
strength. Southwest Airlines’ website is easy to navigate and
makes purchasing tickets less com-
plicated. The FedEx tracking system for packages creates
consumer confidence in the company.
Tactical functional assessments involve asking the right
questions about all of the firm’s opera-
tions, including the factors described in Table 2.1.
Table 2.1 Tactical/functional analyses
Function Examples of factors to analyze
Production Costs, on-time delivery rates, consumer views of
quality
Quality Control Rates of defects/returns
Marketing Market share, brand loyalty or power
Sales By total volume, product lines, individual products

Accounting Errors noted by auditors
Finance Cost of capital, liquidity, leverage (debt ratio)
Information Technology Quality of website, online ordering
systems, support of internal operations
Research and Development Number of innovations adopted
Human Resources Rates of absenteeism, tardiness, turnover
A tactical analysis is similar to a strategic analysis in the sense
that each of these functions are
assessed individually and also in terms of how well they
contribute to company success. As noted
in Chapter 1, line managers often have different responsibilities
and pursue different objectives
than do staff managers. Time frames must also be considered. A
research and development team
may take several years to finalize an innovation. Absenteeism,
tardiness, and turnover rates are
normally examined annually. Company sales can be studied in
shorter time frames, especially
under circumstances such as a major season (Christmas, summer
vacation) versus off-season.
Operational-Level Assessments
Front-line supervisors contribute information to the planning
process by providing additional
details. Each of the functions assessed at the tactical level can
be studied in greater deal at the
operational level. The goal of internal assessments in general is
to provide as complete a pic-
ture as possible for managers to commence with planning
decisions. For example, if servers in
a restaurant encounter ongoing complaints about a specific item

on the menu, the information
can be transmitted to a supervisor who would in turn report the
problem to managers at higher
ranks. Julia Stewart, who was CEO of IHOP (International
House of Pancakes) when the com-
pany acquired Applebee’s, noted that she relied heavily on
feedback from first-line employees in
assessing products and serving methods (Mero, 2007).
The External Environment
Any number of factors, events, trends, and crises that occur
outside of a company can have a
powerful impact on what takes place inside that same company.
To fully understand the orga-
nization’s current situation, top-level managers are expected to
know what is happening in the
world. The external environment consists of the total set of
forces that influence a company but
are not within its boundaries. A standard analysis of the
external environment consists of two
major components:
1. Semicontrollable forces influence a firm, but the company
can influence them in return.
2. Noncontrollable forces influence the firm, and the company
cannot influence them in return.
Semicontrollable Forces
Managers at the strategic, tactical, and operational levels
interact with members of other organi-
zations and other entities such as governments and special

interest groups. These individuals and
groups influence the company’s success. Part of the planning
process involves examining these
relationships to discover any problems or opportunities.
Semicontrollable forces include
• customers
• suppliers
• financial institutions
• unions
• the local community
• shareholders
A company’s customers can take many forms. For a major
manufacturer, one potential set of
primary customers is either wholesale or retail middlemen. The
manufacturer does not sell
directly to individual consumers, but rather to other companies.
A company finds a second
type of customer when it sells products, component parts, or
supplies to other companies. For
example, Holiday Inn caters to individual travelers, but also to
companies and industries host-
ing conventions as well as employees who
travel regularly for their company. These
types of customers are called B2B, b-to-b,
or business-to-business customers. For
retailers, customers are the consumers
who visit the store.
Customers clearly influence a company’s
operations. If a local restaurant serves
items that cause food poisoning and many
customers become ill, that restaurant
may not survive. If Walmart’s manage-
ment team decides to take a product off

its shelves, the company that provided
the product may have a big problem.
Consequently, managers know that cus-
tomers are influenced through the four P’s
of marketing: products, prices, place (dis-
tribution), and promotion.
Influencing customers involves creating desired products at
acceptable prices with distribution
systems that make it easy to buy items and promotional
programs that attract and keep people
coming back. The recent explosion of Internet shopping has
drastically changed the nature of dis-
tribution or placing systems in many industries, such as travel
and hospitality, and new websites
continue to emerge.
Suppliers provide the raw materials and support services
necessary to keep a company function-
ing. If a supplier raises prices or provides low-quality materials,
the company has been affected.
To influence suppliers, company leaders rely on bargaining
processes. The negotiations routinely
cover prices, levels of quality, delivery times, and sometimes
inventory control and financing
services. For example, a buyer in a furniture company that
requires quality fabric to cover chairs
and sofas would probably threaten to change suppliers if
suddenly the materials began routinely
Fuse/Thinkstock
▲▲ The explosion of Internet shopping has drastically changed
the nature of distribution or placing systems in many
industries.

tearing during the production process. The same buyer might
also look for other options if a fab-
ric supplier suddenly and dramatically raised its prices.
Financial institutions influence a company by either lending or
refusing to lend money. Credit
terms including interest rates, collateral, and repayment
programs influence how a firm’s finan-
cial team operates. To positively influence financial institutions
that might lend them money,
company leaders maintain quality records to make it clear the
firm is a good credit risk. Following
the 2008 recession, many businesses found it difficult to obtain
funding for expansion or other
projects.
Unions influence a company’s bottom line. Arrangements
between unions and companies range
from cooperative to combatant. Managers are able to influence
unions in various ways, includ-
ing how employees are treated in terms of hiring, firing,
layoffs, discipline, pay, and benefits.
Management also influences unions through concessions and
demands at the bargaining table.
The local community can grant either favorable or unfavorable
treatment to an organization.
Local governments can create business tax incentives but also
can instruct local law enforcement
to keep a careful eye on a company. Local citizens can respond
positively to a company, lead-
ing members to seek employment in the organization or spread

negative word-of-mouth com-
ments about the firm. To influence the local community,
managers engage in positive public
relations activities. Any bad publicity, such as when a video of
an employee tampering with food
in a Domino’s Pizza restaurant went viral (Maniac World,
2013), should immediately be met
with a response from the company, to avoid long-term damage
to the firm’s image. Also, human
resources departments work hard to make sure citizens perceive
the company as a fair and com-
passionate employer.
Shareholders influence an organization through voting and by
purchasing or not buying stock. At
the extreme, shareholders can overthrow a board of directors
and elect new members. Although
a CEO replacement by shareholders is a rare event, instances of
pressure on CEOs are more com-
mon, such as when a group placed pressure on Chevron to
terminate the services of CEO John
Watson (Rapoza, 2013). Top managers try to keep shareholders
happy by maintaining favorable
dividend payments and by releasing documents such as annual
reports to demonstrate that the
company is in good hands (Trewatha, Newport, & Johnson,
1997).
Noncontrollable Forces
Another set of factors demands the management team’s
attention. Noncontrollable forces shape
the planning process by presenting opportunities and posing
threats. The traditional list of non-
controllable forces includes the following:
• political and legal forces

• social trends
• economic conditions
• technological changes
• competitive forces
Political and legal forces can profoundly affect business
activity. Governments have various
goals and agendas, many of which can make a company’s
business environment more favorable
or create tremendous obstacles. Table 2.2 displays seven ways
in which governments influence
business.
Table 2.2 Seven ways in which governments influence business
Laws, regulations, and
regulatory agencies
Affordable Health Care Act
Occupational Safety and Hazards Act
Environmental Protection Agency (and Act)
Family and Medical Leave Act
Civil Rights Act
Sarbanes–Oxley Act
Courts and court decisions Liability lawsuits

Size of judgments and awards
Employment discrimination cases
Taxation and tax policies Tax rates on individuals
Tax rates for corporations
Tax loophole
Subsidies and loans Student loans
Loans to businesses and industries
Subsidies for farmers
Subsidies for oil companies
Government competition with private
enterprise
U.S. Postal Service (versus FedEx, UPS)
National Park Service campgrounds (versus private camping
sites)
Government intrusion into the
economy
Activities of the Federal Reserve Board
Deficit/Surplus spending
Protection of private and
intellectual property

Private ownership
Patents and copyrights
Social trends constantly change. Managers are expected to
monitor and adjust to various social
circumstances, such as recently emerging viewpoints about
same-sex marriages. Some individu-
als may still have powerful feelings about such a major social
change. Here are some social trends
that currently have an impact on business:
• Rising levels of education but greater educational
disparity in the population
• Changing expectations related to gender roles
• Family size and composition
• Population locations and movements of populations (rural
to urban; Northwest United
States to the South)
• Aging of the population
• Spending/saving rates
Each of these factors can influence a business in subtle or
dramatic ways. For example, rising
savings rates during recessions can influence discretionary
spending. Smaller family sizes have
changed food packaging; food companies now offer smaller
units and even single-serving pack-
ages, especially because more households consist of only one
person who is divorced or widowed,
or two people living together. The aging population creates
opportunities for businesses that

provide care for the elderly and other similar services. Leaders
consider the impact of social
trends on their company’s specific products, services, and
managerial style.
Whether boom or bust, economic conditions shape purchasing
habits, the costs of raw materials,
and company activities. A firm responding to a recession is
likely to cut back on payroll, traveling
expenses, and inventories. A company will react to a growing
economy by offering new products,
adding personnel, and expanding other activities.
Technological changes have affected the business landscape in
major ways over the past sev-
eral decades. In essence, technology has restructured the entire
conduct of business. Technology
affects planning for the following reasons:
• It leads to new products.
• It creates product improvements.
• It improves production methods.
• It changes how jobs are performed.
New technologies have dramatically affected jobs at the lowest
level of a company. For example,
an employee working as office assistant now needs to know how
to use the Internet, a GPS device,
and an iPad to conduct daily business. At the extreme,
technology has shaped new industries,
including e-commerce and biomedical research and products.
Competitive forces are among the most powerful
noncontrollable influences. Company leaders

monitor competition at three levels: product versus product
(Ford Focus versus Toyota Corolla),
company versus company (Ford versus Toyota), and industry
versus industry (automobile versus
high-speed rail). Companies compete for customers, suppliers,
key employees, financial resources,
and physical resources. Effective planning calls for responding
to moves made by the competi-
tion (Bedeian, 1986, pp. 156–178). It also includes evaluating
the industry environment. Table 2.3
identifies the five forces approach to industry evaluation,
as developed by Michael Porter (1990).
Table 2.3 Porter’s five forces
Force Description
Threat of new entrants Assesses the possibility of new
competitors entering the marketplace
and considers barriers to entry that might prevent new entrants,
such as
governmental restrictions; patent or intellectual property
protection; capital
requirements; brand strength of current competitors; the lack of
distribution
channels for new competitors
Threat of substitutes Assesses the potential for substitute
products to change the industry
(e.g., digital vs. traditional photography)
Presence of suppliers Assesses relationships with suppliers and
current competitors
Customer strength Identifies industries in which customers hold
the most market power and can

affect competitors
Competitive rivalries Identifies how strongly companies
compete with one another; this forces
increases with larger numbers of competitors, slow industry
growth, unused
industry capacity, increased product similarity, high barriers to
exit
Source: Based on Porter, M. (1990). Competitive advantage.
New York: The Free Press.
The threat of new entrants …
Baack, D., Reilly, M., & Minnick, C. (2014). The five functions
of effective management (2nd ed.). Retrieved from
https://content.ashford.edu/

Ziyao LiIAS 3753Dr. Manata HashemiWorking Title The Edu.docx

More Related Content

Similar to Ziyao LiIAS 3753Dr. Manata HashemiWorking Title The Edu.docx (20)

More from ransayo (20)

Recently uploaded (20)

Ziyao LiIAS 3753Dr. Manata HashemiWorking Title The Edu.docx