Alat beratku.blogspot.com 8000-1-product-guide-imperial

Manitowoc 8000-1
Product Guide
Features
• 80 USt capacity
• 200 ft heavy-lift boom
• Max boom + jib combination:
180 ft + 60 ft
• 285 HP engine
• 525 fpm maximum line speed
• 17,000 lb rated line pull

Manitowoc 8000-1 3
Contents
Specifications 4
Outline dimensions 7
Winch performance data 12
Load chart notes 13
Boom combinations 14
Heavy-lift boom range / charts 16
Fixed jib boom range / charts 18
Clamshell 21
Manitowoc Crane Care 22

4
Specifications
Upperworks
Engine
HINO J08E-UV, 6 cylinder, water-cooled diesel,
direct fuel injection with turbocharger, 285 HP at
2100 high-idle RPM. Maximum torque 750 lb•ft net
at 1,600 rpm; Interim Tier 4/Stage IIIB (Required for
sale in the US/Canada/Europe; requires "Ultra Low
Sulfur Diesel")
One diesel fuel tank, 105 gallons capacity.
Two 12 volt 136 AH capacity batteries, 24 volt system
and 90 amp alternator.
All wiring harnesses and connectors are numbered for
easier servicing. Machine is equipped with individual
fused branch circuits.
Controls
Full-flow hydraulic control system for constant variable
pressure to front and rear drums, boom hoist brakes
and clutches. Controls respond instantly to the touch,
delivering smooth function operation.
Relief valve pressures:
Load hoist, boom hoist and
propel system 4,630 psi
Swing system 3,989 psi
Control system 783 psi
Hydraulic system
All three variable displacement piston-type pumps
are driven by a heavy-duty pump drive. One of these
pumps is used in the right propel circuit and boom hoist
circuit, and can accommodate an optional third circuit.
Another is used in the left propel circuit and hook hoist
circuit. The third variable displacement pump is used in
the swing circuit. In addition, two gear pumps are used
in the control system and auxiliary equipment, and two
gear pumps serve the brake cooling system.
Maximum pressure rating. . . . . . . . . . . . . . . . 4,630 psi
Load hoist, boom hoist and propel. . 2 Piston pumps
Swing . . . . . . . . . . . . . . . . . . . . . . . . 1 Piston pump
Control system and auxiliary. . . . . . . . 2 Gear pumps
Brake cooling system. . . . . . . . . . . . . 2 Gear pumps
Reservoir capacity . . . . . . . . . . . . . . . . 116 US gallon
Cooling: Oil-to-air heat exchanger (plate-fin type).
Filtration: Full-flow and bypass type with replaceable
paper element.
Drums
Front and rear drums for load hoist powered by
variable displacement piston-type motors, driven
through planetary reducers. Powered hoisting/
lowering and free-fall operation is standard. Drum turn
indicators for front and rear drums are also standard.
Brakes: spring set, hydraulically-released, multiple-disk
holding brake is mounted on the hoist motor and is
operated through a counter-balance valve. An external
ratchet is fitted for locking the drums.
Drums: (front and rear) 21.5" P.C.D. x 21.7" wide
drums, grooved for 22.0 mm wire rope.
Wire rope capacity:
Front drum. . . . . . . . . . . . . . . . 869 ft working length
Rear drum. . . . . . . . . . . . . . . . . 673 ft working length
Line speed: Single line on the first drum layer
Hoisting:. . . . . . . . . . . . . . . . . . . . . . . . . . . 390 ft/min
Lowering. . . . . . . . . . . . . . . . . . . . . . . . . . . 390 ft/min
Optional third drum: free-fall is optional; drum
grooved for 22 mm wire rope.
Wire rope working length. . . . . . . . . . . . . . . . . 476 ft
Swing system
Swing unit: Powered by a hydraulic piston-type motor
driving spur gears through planetary reducers, the
swing system provides 360° rotation.
Swing brake: A spring-set, hydraulically released
multiple-disc brake is mounted on swing motor.
Swing lock: 4-Position lock for transportation.
Rotating bed turntable: Single-row ball bearing with
an integral internally cut swing gear.
Swing speed: 4.0 rpm
Boom support system
Single drum powered by a hydraulic axial piston motor
through a planetary reducer.
Brake: A spring-set, hydraulically released multiple-
disc brake is mounted on the boom hoist motor. An
external ratchet is fitted for locking the drum.
Drum: Single drum, grooved for 16 mm diameter wire
rope. Boom hoist reeving is 12-part line.

5
Specifications
Manitowoc 8000-1
Wire Rope Capacity:
Drum 492 ft working length.
Line speed:
Hoisting . . . . . . . . . . . . . . . . . . . . . . . . . . . 230 ft/min
Lowering. . . . . . . . . . . . . . . . . . . . . . . . . . . 230 ft/min
Gantry
This high folding type gantry is fitted with a sheave
frame for boom hoist reeving. Hydraulic lift is
standard. It provides full up, full down positions.
Counterweight
Upper weight (5 pieces): 57,584 lb
Carbody weight (2 pieces): 14,330 lb
Operator’s cab
Totally enclosed, full vision cab fitted with tinted
safety glass and opening front window. A fully
adjustable, highbacked seat with arm rests. Short
handle control levers; electronic twist grip hand
throttle. An air conditioner, a signal horn and
windshield wiper are standard.
Lights:
2 - Front flood lights
1 - Cab inside light
Safety device
New easy to read at a glance LMI and maintenance
display.
Lowerworks

Carbody
The durable carbody features steel welded construction
with extendible axles.
Crawlers
Crawler assemblies can be hydraulically extended for
wide-track operation. Crawler belt tension adjusted
with hydraulic jack and maintained by shims between
idler block and frame.
The independent hydraulic propel drive is built into
each crawler side frame. Each drive consists of a
hydraulic motor driving a propel sprocket through a
planetary gearbox. The hydraulic motor and gearbox
are built into the crawler side frame within the shoe
width. The track rollers are sealed for maintenance-free
operation.
Crawler shoes
36" wide crawler.
Travel speed
(High/Low) 1.07/0.71 mph
Attachments

Boom
Welded lattice construction using tubular, high-tensile
steel chords with pin connections between sections.
Two idler sheaves and four point sheaves are standard.
Basic boom length 50 ft consists of the boom butt section
19 ft, 10 ft boom insert and boom top section 21 ft.
Optional boom inserts are available to provide
extension capabilities. They also have welded lattice
construction with tubular, high-tension steel chords
and pin connections on each one of the 10 ft, 20 ft,
40 ft inserts.
Maximum total length of boom 200 ft.
Fixed jib
The optional fixed jib employs welded lattice
construction with tubular, high-tensile steel chords
with pin connections between sections.
Basic jib length 30 ft consists of jib butt section 15 ft
and jib top section 15 ft.
Optional jib boom inserts of 10 ft, 20 ft are available
for extension capabilities up to 60 ft.
Maximum total length of boom and jib 180 ft + 60 ft
is 240 ft.
Tools and accessories
A set of tools and accessories are furnished.
Optional equipment
Optional: blocks and hooks each with roller
bearing sheaves grooved for 22 mm diameter wire rope,
and roller bearing swivel with hook latch.
12 USt ball hook, 722 lb wedge socket
for 22 mm wire rope.
60 USt hook block, 2,486 lb, with four 24"
Nominal O.D. roller bearing sheaves.

6
Specifications
90 USt hook block, 2,892 lb with five 24"
Nominal O.D. roller bearing sheaves.
Optional: Detachable upper boom point with one
561 mm Nominal O. D. roller bearing steel sheave
grooved for 22 mm rope for liftcrane.
Working weight
Approximately 165,600 lb including upperworks and
lowerworks, full upper counterweights, full carbody
counterweights and 50 ft basic boom.
Ground pressure
Approximately 10.8 psi with basic boom.
Gradebility
With basic boom: 40%.

7
Outline dimensions
Manitowoc 8000-1
20' 7"
17' 10"
5'9"
10'10"
20'3"
3'7"6'8"
10' 4"
3' 7"
50'

8
Outline dimensions
Option
L
H
Upperworks x 1
Length 39' 8"
Width 11' 10"
Height 10' 10"
Weight 91,677 lb
Note: Weight includes base machine, crawler, gantry,
maximum hoist and whip lines on drums, boom butt,
full hydraulic fluid reservoir, and one third tank of fuel.
Upperworks x 1
Length 27' 0"
Width 11' 10"
Height 10' 10"
Weight 87,434 lb
Note: Weight includes base machine, crawler, gantry,
maximum hoist and whip lines on drums, full hydraulic
fluid reservoir, and one third tank of fuel.
Upperworks without crawlers x 1
Length 39' 8"
Width 9' 10"
Height 9' 7"
Weight 57,981 lb
Note: Weight includes base machine, gantry, maximum
hoist and whip lines on drums, boom butt, full hydraulic
fluid reservoir, and one third tank of fuel.
Upperworks without crawlers x 1
Length 25' 3"
Width 9' 10"
Height 9' 8"
Weight 53,748 lb
Note: Weight includes base machine, gantry, maximum
hoist and whip lines on drums, full hydraulic fluid
reservoir, and one third tank of fuel.
Crawlers x 2
Length 20' 7"
Width 3' 0"
Height 3' 3"
Weight 16,843 lb
L
H
L
H
L
H
L
H

9
Outline dimensions
Manitowoc 8000-1
Upper counterweight x 1
Length 14' 6"
Width 3' 3"
Height 2' 9"
Weight 20,550 lb
Upper counterweight (R) x 2
Length 4' 9"
Width 3' 1"
Height 2' 11"
Weight 9,260 lb
Upper counterweight (L) x 2
Length 4' 9"
Width 3' 1"
Height 2' 11"
Weight 9,260 lb
Carbody counterweight x 2
Length 5' 2"
Width 5' 7"
Height 1' 11"
Weight 7,165 lb
Self removal unit x 1
Length 5' 3"
Width 6' 3"
Height 2' 11"
Weight 1,896 lb
Option
L
W
H
L
HW
W
L
H
W
H
L
L
W
H

10
Outline dimensions
L
H
L
H
L
H
L
H
Boom butt 19' x 1
Length 19' 7"
Width 4' 8"
Height 5' 7"
Weight 2,326 lb
Boom top 21' x 1
Length 22' 8"
Width 4' 6"
Height 4' 10"
Weight 2,227 lb
Boom insert 10' x 1,2
Length 10' 4"
Width 4' 6"
Height 4' 4"
Weight 590 lb
Boom insert 20' x 1,2
Length 20' 5"
Width 4' 6"
Height 4' 4"
Weight 1,025 lb
Boom insert 40' x 1,2,3
Length 40' 5"
Width 4' 6"
Height 4' 4"
Weight 1,896 lb
Note: Use one "A" type insert with lug required for any
boom combinations that require a 40' insert.
Fixed jib butt x 1
Length 15' 9"
Width 2' 8"
Height 2' 8"
Weight 440 lb
L
H
L
H
Option

11
Outline dimensions
Manitowoc 8000-1
Fixed jib top x 1
Length 16' 1"
Width 2' 7"
Height 2' 8"
Weight 485 lb
Fixed jib insert 10' x 1
Length 10' 2"
Width 2' 8"
Height 2' 8"
Weight 210 lb
Fixed jib insert 20' x 1
Length 20' 3"
Width 2' 8"
Height 2' 8"
Weight 390 lb
Fixed jib strut x 1
Length 11' 11"
Width 2' 9"
Height 1' 8"
Weight 456 lb
L
H
L
H
L
H
L
H
Option

Winch performance data
12
Line pull
Rated line pull
lb
*Maximum line pull
lb
Front drum
17,000 34,400
Rear drum
17,000 34,400
Optional 3rd drum
17,000 34,400
* Maximum line pull is not based on wire rope strength.
Wire rope specifications
Use Specs Diameter
mm
Working
length
ft
Breaking
strength
lb
Front
drum
IWRC C/O
6 X Fi (29)
22,0
869 81,570
Rear
drum
IWRC C/O
6 X Fi (29)
22,0
672 81,570
Boom hoist
drum
IWRC C/O
6 X Fi (31)
22,0
492 47,210
Optional
3rd drum
IWRC C/O
6 X Fi (29)
22,0
476 81,570
Front and rear winch
Layer
Line speed
ft/min
1 2 3 4 5 6
Single line pull
lb
Ratedlinepull
0 394 420 446 495 499 525
5,000 394 420 466 495 499 525
10,000 353 353 353 353 353 353
15,000 235 235 235 235 235 235
17,000 208 208 208 208 208 208
20,000 176 176 176 176 179 182
25,000 141 146 148 149 149 –
30,000 123 – – – – –
NOTE: Line speeds and line pull based on single line.
Line pulls are not based on wire rope strength.

13
Load chart notes
Manitowoc 8000-1
1. Rated loads included in the charts are the
maximum allowable freely suspended loads at a
given boom length, boom angle and load radius,
and have been determined for the machine
standing level on firm supporting surface under
ideal operating conditions.The user must limit or
de-rate rated loads to allow for adverse conditions
(such as soft or uneven ground, out-of-level
conditions, wind side loads, pendulum action,
jerking or sudden stopping of loads, inexperience
of personnel, multiple machine lifts, and traveling
with a load).
2. Capacities do not exceed 75% of minimum
tipping loads. Capacities based on factors
other than machine stability such as structural
competence are shown by asterisk * in the charts.
3. The machine must be reeved and set-up as stated
in the operation manual and all the instruction
manuals. If these manuals are missing, obtain
replacements. Boom backstops are required for
all boom lengths. Gantry must be in the fully
raised position for all operations. Crawlers must
be fully extended and be locked in position. The
crane must be leveled to within 1% on a firm
supporting surface.
4. Do not attempt to lift where no radius or load is
listed as crane may tip or collapse.
5. Attempting to lift more than rated loads may
cause machine to tip or collapse. Do not tip
machine to determine capacity.
6. Weight of hooks, hook blocks, slings and other
lifting devices are a part of the total load. Their
total weight must be subtracted from the rated
load to obtain the weight that can be lifted.
7. When lifting over boom point with jib or upper
boom point installed, rated loads for the boom
must be deduted as shown below.
Jib length ft
Upper boom
point
30 40 50 60
Deduct lb 320 2,400 3,200 4,200 5,200

8. The total load that can be lifted by the jib is
limited by rated jib loads.
9. Boom lengths for jib mounting are 80 ft to 180 ft.
10. The total load that can be lifted by the upper
boom point is: the rated load for the boom
(without upper boom point installed) minus
320 lb; however, the upper boom point rated load
should not exceed 17,000 lb.
11. An upper boom point cannot be used on a 200 ft
boom length.
12. The boom should be erected over the front of
the crawlers, not laterally. When erecting and
lowering the boom with a length of 180 ft with
jib, blocking must be placed at the end of the
crawlers. See operator's manual for details.
13. Least stable position is over the side.
14. Maximum hoist load for number of reeving parts
of line for hoist rope.
Maximum load for main boom
No. of parts of line 1 2 3 4 5
Maximum loads lb 17,000 34,000 51,000 64,000 85,000
No. of parts of line 6 7 8 9 10
Maximum loads lb 102,000 119,000 136,000 153,000 160,000
Maximum load for fixed jib
No. of parts of line 1 2
Maximum loads lb 17,000 24,000
Maximum load for upper
boom point
No. of parts of line 1
Maximum loads lb 17,000
15. Lifting capacities listed apply only to the machine
as originally manufactured for and supplied by
Manitowoc Cranes, Inc. Modifications to this
machine or use of equipment other than that
specified can reduce operating capacity.
16. Designed and rated to comply with ASME Code
B30.5.
Operation of this equipment in excess of rated loads or disregard of
instruction voids the warranty.

14
Boom combinations
Model 8000-1
Main boom 200 ft
19 ft
boom butt
40 ft
boom insert
20 ft
boom insert
10 ft
boom insert
40 ft
boom insert
40 ft
boom insert
21 ft
No. 8000-1
boom top
Model 8000-1
main boom
200 ft
10 ft
boom insert
No. 8000-1 heavy-lift
boom combinations
Boom inserts
Boom
length
ft
10 ft 20 ft 40 ft
50 1 – –
60 2 – –
70 1 1 –
80 2 1 –
90 1 2 –
100 2 2 –
110 1 1 1*
120 2 1 1*
130 1 2 1*
140 2 2 1*
150 1 1 2*
160 2 1 2*
170 1 2 2*
180 2 2 2*
190 1 1 3*
200 2 1 3*
* NOTE: One 40 ft boom insert with lug
40A is required for fixed jib. When no jib is
installed a 40 ft boom can be used instead
of 40A.

15
Boom combinations
Manitowoc 8000-1
Model 8000-1
Fixed jib on main boom
250 ft
10 ft
jib insert
15 ft
jib top
15 ft
jib butt
Model 8000-1
fixed jib
60 ft
10 ft
boom insert
40 ft
boom insert
20 ft
boom insert
40 ft
boom insert
40 ft
boom insert
21 ft
boom top
20 ft
jib insert
19 ft
boom butt
Model 8000-1
main boom
190 ft
No. 8000-1 fixed jib
combinations
Fixed jib
inserts
Fixed jib
length
ft
10 ft 20 ft
30 – –
40 1 –
50 – 1
60 1 1

16
Heavy-lift boom range diagram
Rotation
Tailswing
14' 5"
5' 9"
3' 7"
40
200
180
160
140
120
100
80
60
30
190
210
170
150
130
110
90
70
50
160 180140120100806040
Heightabovegroundft
Distance from centerline of rotation ft
82 0
70 0
80 0
60 0
50 0
40 0
30 0
20 0
120'
130'
140'
150'
110'
100'
90'
80'
70'
60'
50'
160'
170'
180'
190'
200'
No. 8000-1 main boom

17
Heavy-lift boom load charts
Manitowoc 8000-1
Boom
ft
50 60 80 100 120 140 160 180 190 200
Radius
12 160.0*
14 144.0* 143.8*
16 126.9* 126.7 126.3*
18 113.2* 113.0 112.6*
20 97.4 97.1 96.9 96.8*
24 73.8 73.6 73.3 73.1 73.0* 61.7*
28 59.2 58.9 58.7 58.4 58.3 57.9 44.0*
34 45.5 45.2 44.8 44.5 44.3 44.0 42.1* 32.6* 28.8* 25.7*
40 36.8 36.4 36.0 35.7 35.4 35.1 34.9 31.0* 27.5* 24.4*
45 31.6* 31.2 30.8 30.5 30.2 29.9 29.7 29.2 26.4* 23.3*
55 24.2 23.7 23.3 23.0 22.6 22.4 22.0 22.1 21.3*
75 15.9 15.4 15.0 14.6 14.3 13.9 13.9 13.7
95 11.2 10.7 10.2 10.0 9.5 9.5 9.3
105 9.2 8.7 8.5 8.0 8.0 7.8
115 8.1 7.6 7.2 6.7 6.8 6.5
125 6.6 6.2 5.7 5.7 5.4
135 5.9 5.4 4.7 4.8 4.5
145 4.7 4.0 4.0 3.7
155 3.3 3.3 3.0
170 2.6 2.5
Model 8000-1 liftcrane boom capacities - 8000-1 main boom
57,584 lb crane counterweight
14,330 lb carbody counterweight crawler extended
360° Rating lb x 1 000
Meets ASME B30.5 Requirements - Capacities do not exceed 75% of static tipping load.
NOTICE: This capacity chart is for reference only and must not be used for lifting purposes.
For complete chart, refer to www.cranelibrary.com.

18
Fixed jib range diagram
Tailswing
14' 5"
Rotation
5' 9"
3' 7"
(40) 12,2
200
220
240
260
180
160
140
120
100
80
60
(30) 9,1
190
210
230
250
170
150
130
110
90
70
50
160 180140120100806040
80 0
82 0
30
40
200
210
220
230
190
180
170
160
150
140
130
120
110
70 0
60 0
50 0
40 0
240
30 0
10 0
30 0
60
50
40
30
Heightabovegroundft
Distance from centerline of rotation ft
No. 8000-1 fixed jib on main boom

19
Fixed jib load charts
Manitowoc 8000-1
Model 8000-1 liftcrane jib capacities
57,584 lb crane counterweight, 14,330 lb carbody counterweight crawler extended
10° Offset 30° Offset
Boom
ft
80 100 130 160 180
Boom
ft
80 100 130 160 180
Radius Radius
Jiblength30ft
30 24.0*
Jiblength30ft
30
40 24.0* 24.0* 24.0* 40 19.7*
50 24.0* 24.0* 24.0* 24.0* 19.7* 50 17.6* 18.5* 19.6
60 21.3 20.8 20.3 19.7 18.7* 60 15.9* 16.9* 18.0* 18.9* 18.5*
80 14.4 13.9 13.3 12.7 12.3 80 13.7* 14.3* 13.7 13.2 12.9
100 10.6 10.0 9.4 8.8 8.3 100 9.7 9.1 8.7
120 6.9 6.2 5.8 120 6.5 6.1
140 5.2 4.4 3.7 140 4.0
150 3.6 2.9 150
160 2.9 160
170 170
Boom
ft
80 100 130 160 180
Boom
ft
80 100 130 160 180
Radius Radius
Jiblength40ft
30
Jiblength40ft
30
40 24.0* 24.0* 40
50 22.1* 24.0* 24.0* 22.8* 50 14.4* 15.1*
60 18.8* 20.9* 20.5 20.3* 17.8* 60 12.9* 13.6* 14.5* 15.1*
80 14.5* 14.1 13.5 12.9 12.5 80 10.9* 11.6* 12.5* 13.2* 13.5*
100 10.7 10.2 9.5 8.9 8.5 100 10.3* 10.0 9.6 9.3
120 7.6 7.0 6.4 5.9 120 7.4 6.9 6.5
140 5.2 4.5 3.9 140 5.0 4.5
150 4.6 3.7 3.1 150 3.6
160 3.0 160
170 170

20
Fixed jib load charts
Model 8000-1 liftcrane jib capacities
57,584 lb crane counterweight, 14,330 lb carbody counterweight crawler extended
Boom
ft
80 100 130 160 180
Boom
ft
80 100 130 160 180
Radius Radius
Jiblength50ft
30 20.0*
Jiblength50ft
30
40 20.0* 20.0* 40
50 18.5* 20.0* 20.0* 50
60 15.6* 17.2* 19.3* 19.2* 17.0* 60 10.4* 10.9* 11.4*
80 12.0* 13.3* 13.6 13.1 12.7* 80 8.7* 9.2* 9.8* 10.3* 10.6*
100 9.7* 10.3 9.7 9.1 8.7 100 7.6* 8.0* 8.7* 9.2* 9.5*
120 8.6* 7.7 7.1 6.5 6.0 120 7.6* 7.1 6.8
140 5.7 4.6 4.0 140 5.2 4.8
150 4.6 3.1 3.2 150 3.9
160 4.0 160 3.1
170 170
Boom
ft
80 100 130 160 180
Boom
ft
80 100 130 160 180
Radius Radius
Jiblength60ft
30
Jiblength60ft
30
40 18.0* 40
50 16.3* 17.6* 18.0* 50
60 13.7* 15.0* 16.7* 17.8* 15.0* 60 8.9*
80 10.4* 11.5* 13.0* 13.2 12.8* 80 7.3* 7.7* 8.1* 8.5* 8.7*
100 8.3* 9.3* 9.7 9.1 8.7 100 6.2* 6.6* 7.1* 7.5* 7.7*
120 7.0* 7.8* 7.1 6.5 6.1 120 5.9* 6.3* 6.7* 7.0
140 6.0 5.4 4.7 4.1 140 5.8 5.3 5.0
150 4.7 3.9 3.3 150 4.5 4.1
160 4.0 3.1 2.5 160 3.8 3.3
170 3.4 2.5 170 2.6

Clamshell
21Manitowoc 8000-1
Boom:
Welded lattice construction using tubular, high-tensile steel
chords with pin connections between sections.
Basic boom length: 50 ft
Max. boom length: 70 ft
Limit on clamshell bucket weight: (4,600 lb)
Base = 20 ft
Insert: A = 10 ft
B = 20 ft
Tip = 20 ft
1. Figures represent maximum allowable capacity, and assume level ground and ideal working conditions.
2. Capacities are calculated at 66% of the minimum tipping loads.
3. Capacities are maximum recommended by PCSA Standard #4. Allowances must be made by the user for
such unfavorable conditions as a soft or uneven supporting surface, rapid cycle operations, or bucket suction.
4. The combined weight of the bucket and load must not exceed these capacities.
5. Boom length for clamshell operation should not exceed 70 ft.
Maximum component chart
Boom length ft Boom arrangement
50 Base-A-Tip
60 Base-A-A-Tip, Base-B-Tip
70 Base-A-B-Tip
Boom
ft
50 60 80
Radius
22
26 16.0*
30 16.0* 16.0*
36 16.0* 16.0* 16.0*
40 16.0* 16.0* 16.0*
46 16.0* 16.0* 15.6*
50 14.5* 14.3*
56 12.3 12.3*
60 11.2*
66 9.7*
Ratings shown by * are determined
by the strength of the boom or other
structural components.
Clamshell Capacities
19.5 USt counterweight
(three upper counterweights,
crawlers extended)
lb x 1 000
GUIDE SHEAVE

22
Manitowoc Crane Care
Crane Care is Manitowoc’s comprehensive service and
support program. It includes classroom and on-site
training, prompt parts availability, expert field service,
technical support and documentation.
That’s commitment you won’t find anywhere else.
That’s Crane Care.
Service training
Manitowoc specialists work with you in our training
centers and in the field to make sure you know how
to get maximum performance, reliability and life from
your cranes.
Manitowoc Cranes Technical Training Centers provide
valuable multi-level training, which is available for all
models and attachments, in the following format:
• Intro to Canbus and Canbus 1, 2, 3
• Intro to EPIC and EPIC 1, 2, 3
• Small Crawler 1
• Canbus 1 and 2 assembly, operation and
maintenance
• EPIC 1 and 2 assembly, operation and
maintenance
Refer to www.manitowoc.com for course descriptions.
Parts availability
Genuine Manitowoc replacement parts are accessible
through your distributor 24 hours a day, 7 days a week,
365 days a year.
Service interval kits
200 hour kit
1,000 hour kit
2,000 hour kit
Hydraulic test kit
U.S. standard tools kit
Field service
Factory-trained service experts are always ready to help
maintain your crane’s peak performance.
For a worldwide listing of dealer locations, please
consult our website at: www.manitowoc.com
Technical support
Manitowoc’s dealer network and factory personnel
are available 24 hours a day, 7 days a week, 365 days
a year to answer your technical questions and more,
with the help of computerized programs that simplify
crane selection, lift planning, and ground-bearing
calculations.
For a worldwide listing of dealer locations, please
consult our website at: www.manitowoc.com
Technical documentation
Manitowoc has the industry’s most extensive
documentation; available in major languages and
formats that include print, videotape, and DVD/CD.
Additional copies available through your Authorized
Manitowoc Distributor.
• Crane operator’s manual
• Crane parts manual
• Crane capacity manual
• Crane vendor manual
• Crane service manual
• Luffing jib operator’s/parts manual
• Capacity chart manual - attachments
Available from your Authorized Manitowoc Cranes
Distributor, these videos are available in NTSC, PAL,
SECAM, and DVD formats.
• Your Capacity Chart Video
• Respect the Limits Video
• Crane Safety Video
• Boom Inspection/Repair Video
Crane Care Package
Manitowoc has assembled all of the available literature,
CD’s and videos listed above plus several Manitowoc
premiums into one complete Crane Care Package,
which is supplied to the owner of each new crane.

©2012 Manitowoc
1112-8000-1 PG-US-E www.manitowoccranes.com
This document is non-contractual. Constant improvement and engineering progress
make it necessary that we reserve the right to make specification, equipment, and price
changes without notice. Illustrations shown may include optional equipment and
accessories and may not include all standard equipment.
Regional offices
China
Shanghai, China
Tel: +86 21 6457 0066
Fax: +86 21 6457 4955
Greater Asia-Pacific
Singapore
Tel: +65 6264 1188
Fax: +65 6862 4040
Europe, Middle East, Africa
Ecully, France
Tel: +33 (0)4 72 18 20 20
Fax: +33 (0)4 72 18 20 00
Americas
Manitowoc,Wisconsin, USA
Tel: +1 920 684 6621
Fax: +1 920 683 6277
Shady Grove, Pennsylvania, USA
Tel: +1 717 597 8121
Fax: +1 717 597 4062
Regional headquarters
Manitowoc Cranes
China
Beijing
Chengdu
Guangzhou
Xian
Greater Asia-Pacific
Australia
Brisbane
Melbourne
Sydney
India
Chennai
Delhi
Hyderabad
Pune
Korea
Seoul
Philippines
Makati City
Singapore
Factories
Brazil
Passo Fundo
China
TaiAn
Zhangjiagang
France
Charlieu
Moulins
Germany
Wilhelmshaven
India
Pune
Italy
Niella Tanaro
Portugal
Baltar
Fânzeres
Slovakia
Saris
USA
Manitowoc
Port Washington
Shady Grove
Americas
Brazil
Alphaville
Mexico
Monterrey
Chile
Santiago
Europe, Middle East,
Africa
Czech Republic
Netvorice
France
Baudemont
Cergy
Decines
Germany
Langenfeld
Hungary
Budapest
Italy
Lainate
Netherlands
Breda
Poland
Warsaw
Portugal
Baltar
Russia
Moscow
South Africa
Johannesburg
U.A.E.
Dubai
U.K.
Buckingham

Alat beratku.blogspot.com 8000-1-product-guide-imperial

More Related Content

What's hot (10)

Similar to Alat beratku.blogspot.com 8000-1-product-guide-imperial (20)

More from Vonita Allena (12)

Recently uploaded (20)

Alat beratku.blogspot.com 8000-1-product-guide-imperial