Engineering:Hydrostatic loop
From HandWiki
A hydrostatic loop, though not often used in plumbing practice, is an arrangement of pipes formed into a vertical loop to prevent backflow of water within the plumbing potable water system. Since a siphon has a maximum height that it can work (about 33 feet), a hydrostatic loop is built higher than 33 feet. There are several ways to prevent siphonage and an undesirable backflow of the water in a plumbing system. The design relies on gravity and atmospheric pressure rather than mechanical devices, making it a passive method of backflow prevention.[1] However, due to its impractical height and space requirements, the hydrostatic loop is rarely used in modern installations, where mechanical backflow preventers or air gaps are preferred.
- Vented loops [2]
References
See also
- backflow prevention
- Pressure vacuum breaker
- Double check valve
- Chemigation valve
- Reduced pressure zone device
- Atmospheric vacuum breaker
 |  |
